3 phase stator winding machine

Place of Origin:China

Brand Name:Nide

Model Number:ND-S2PB-2

...Phase Stator Winding Machines With Double Working Stations / Flyers Quick Detail: Winding automatically done by machine 2 working stations, 2 flyers. PLC and touch screen control. Manually fitting mould, and straining and releasing the mould with hand control lever. Quickly replace the tooling gripper; Travel, tilt angle can be adjusted; The stator coil winding machine...

Brand Name:SMT

Model Number:SMT-R160

Place of Origin:China

..., servo motor and three phase motor. Multistrand Type Coil Winding Machine adopts special purpose controller which could set the function of arraying direction, winding start point, slow starting,slow ending, sides stop, auto width, auto reset, ect. (2

Brand Name:WIND AUTOMATION

Model Number:WIND-HMW-205D

Place of Origin:China

...G connection, three phase 2 pole winding, single phase 2 poles, 6 poles outside BLDC stator, 12 slots 6 poles BLDC stator. Fan Motor Stator Winding Machine Advantages: Basic flyer winding one by one slot Easy to adjust and operate, dedicated machine for

Brand Name:WEDE

Model Number:WD-2A-XSW

Place of Origin:CHINA

...Stator Winding Machine with Two Working Station Two Poles ( Winder ) Quick Detail: 1. Model No.: WD-2A-XSW 2. This machine has two working station. 3. Easily to change the fixture for different types of stators. 4. It could adapt to different requirement of different stator models. 5. It can wind two stators at same time. Description: This Automatic stator winding machine could wind two stators...

Brand Name:WEDE

Model Number:WD-2A-XSW

Place of Origin:CHINA

Stator winding machine is designed with auto fixture assembly. It can complete the winding fully automatic since the operator place the paper inserted stator core onto the holder. 2 poles stator winding machine has 2 holders and 2 fliers, which enable to do 2 stators winding at the same time, and also 2 non-wound insulation material inserted stator in the queue to take over 2 wound stators...

Brand Name:AIP

Model Number:AIP89**

Place of Origin:China

Stator Testing Machine For Compressor Motor Stator/Refrigerator/Air Conditioner Compressor Motor 1. Product: Stator testing machine 2. Tested product: compressor motor stator 3. Stator testing machine introduction This testing machine can be used to test the stator of compressor motor for home appliance. The AC Hipot/high voltage/dielectric strength, insulation resistance, surge/impulse/layer short, winding...

Brand Name:CHENXIN

Model Number:CX-JY02

Place of Origin:CHINA

... motors, stepper motors and various DC brushless motor, etc. Equipment parameters and product accuracy that can be met: Six-station model: the machine can control and process the winding process while winding at high speed, and can

Brand Name:Champypund

Place of Origin:China

...Stator Fully Automated Hairpin Winding Machine for Three-Wheeler Stator 1. Descriptions:​​ The Fully Automated Hairpin Winding Machine is engineered to deliver exceptional winding accuracy and efficiency for flat wire stators. Designed for high-performance electric motors, this machine...

Place of Origin:Guangdong, China

Brand Name:PINGSHENG

...winding machine is a 4 stations (4stations automatic winding, automatic wiring, automatic pole changing, automatic cutting line head and end. 4 poles,6 poles winding equipment, aluminum profile housing, optional device safety grating. Applicable stator outer diameter Φ 10 to φ 42 within the scope of any number of 4 poles,6 poles brushless stator. Application High quality winding...

Brand Name:QIANHE

Model Number:WIS-F

Place of Origin:Hangzhou China

... and steel Application The air nipper blades can be matched with the air nipper body to create a full air nipper for use on an automatic winding machine. This machine is then used for the cutting of enameled copper wires, transformer pins, soft wire,

Brand Name:TMS

Model Number:TMS-003

Place of Origin:China

...Stator Recycling Machine Motor Stator Dismantling Recycling Machine Description of motor stator recycling machine Motor stator consists of three parts,the stand and installed within the frame of iron cylindrical core and the copper wire winding. Waste motor stator cutting and dismantling machine is special equipment for stator dismantling, it adopts hydraulic system, cuts stator...

Brand Name:GAOHE

Model Number:GHWB-4

Place of Origin:CHINA

... digital winding machine manufacturers. We have cheap coil winder, stator winding machine on sale, and you are welcomed to wholesale products from our factory. This is a old type 6 position digital bobbin winding machine can be used to wind the different ...

Brand Name:Jinqiu

Model Number:DX series

Place of Origin:China-Wuxi Jinqiu Machinery Co.,ltd

DQ-2 Three Phase Stator Wire Inserting Machine / wedging machine Suitable for automobile generator stator three-phase one-time embedded and cover groove wedge of special equipment. Mitsubishi PLC control. Color touch screen operation and fault ...

Brand Name:SAILRAY

Model Number:SRMWHX7010

Place of Origin:CHINA

125kV Rotating anode X‐Ray tube assembly for CR or DR machine Equivalent To: Toshiba E7239 Stator key values 1-phase stator Test point C-M C-A Winding resistance ≈18.0…22.0Ω ≈45.0…55.0Ω Max.permissible operating voltage(run-up) 230V±10% ...

Brand Name:TRINTFAR

Model Number:MD-40

Place of Origin:China

...Stator Winding Welding Machine Fully Automatic Spot Welders The motor stator manufacturing production line includes paper inserting machine, winding machine, inserting machine, strapping machine, forming machine, and testing machine. TRINTFAR can supply and produce, all of which are automatically completed by the machine...

Place of Origin:china

Brand Name:according to customer

Model Number:HK-028Q

... 50Hz, 60Hz, 50/60Hz Power 120-230W Material Stator lamination: Silicon steel Q195 Rotor lamination: Silicon steel Q195 Rotor end ring: primary ingot Shaft: Steel #45 C D: Φ10 or Φ12 Cover(top/bottom): galvanized steel or aluminium Winding:

Brand Name:JLNE

Model Number:TF-008

Place of Origin:Jiangsu,China

... winding in the three parts of the iron core. The motor stator is a special equipment for dismantling broken disassemble the motor stator, the hydraulic system equipment, equipment can be the stator (limited to cast-iron), cylindrical core broken into two,

Brand Name:JIATUO CHINA

Model Number:JTPET-winding

Place of Origin:CHINA

... 0.6-1.2mm max weight 350KG Packing method PE film gross weight 780kg Using condition: power single-phase 220V, air pressure 4-7kgf, plug the air pipe(Φ8)in according to the

Brand Name:Swift

Model Number:SWT25100F

Place of Origin:Shenzhen, China

SWT25100F Automatic Cable Tie Tool Machine For A Stator Winding Fast Bundle Automatic cable tie tool for stator winding. SWT25100F is a fixed cable tie gun. Features 1. Loose cable ties: Width 2.5 * Length 100mm, Cable ties model: T36100. 2. When to tread ...