300a overload test equipment

Brand Name:Sinuo

Model Number:SN9816

Place of Origin:China

...300A Endurance & Overload Test Equipment Product Description The Intelligent Thermal Fuse Tester is a specialized instrument designed for testing the performance of small fuses, including fuse blowing time and current measurement. It complies with GB/T 9364.1-2015, GB 9364.3-2018, GB/T 9816.1-2023 Clause 10.4, and IEC 60691-2023 standards for fuse, endurance, and overload testing requirements. Equipped

Brand Name:Sinuo

Model Number:SN552-5V300A

Place of Origin:China

5V 300A Lithium-ion Batteries Performance Test Battery Cell Testing Equipment Equipment Overview The equipment is mainly composed of upper computer, intermediate computer, DC/AC module, DC/DC module, lower computer, data ...

Brand Name:RISING

Model Number:RSHL-200A

Place of Origin:China

RSHL-300A CT PT Testing Equipment High Accuracy 0.05 class 300A Standard Current Transformer Product Description Purpose It can be used as a standard instrument for the verification of grade current transformers or for other precision current ...

Brand Name:SKYLINE

Model Number:SL-S43-A

Place of Origin:China

...Ride On Toys And Seats Overload Test Product Information Place the toy on a horizontal plane. Load the toy on its standing or sitting surface with the appropriate mass in accordance with below table Conduct the test for overload requirements so that it ...

Brand Name:HNMC

Model Number:MCSP01

Place of Origin:China

...Energy test, Demand test, Error test, Dial test 5) Support RS232 communication with PC to upload the test data 6) GPS/GPRS module (optional) 7) DLMS reading (optional) Technical Index Current Measurement Range clamp on CT: 10A, 50A, 60A, 100A, 300A, etc…

Brand Name:LIYI

Model Number:LY-300A

Place of Origin:CHINA

Electronic Plastic Testing Equipment / Digital Density Meter For Rubber , Electric Wire LY-300A Electronic Digital Rubber and Plastic Density Meter with Factory Price Suitable for: Rubber, Plastic, Electric wire, Hard alloy, New materials research lab ...

Brand Name:Kinte

Model Number:WH-8901B (ZRS-3)

Place of Origin:Guangdong,China (Mainland)

... or ignite their nearby parts, glow-wire test Simulation of hot components or overload resistance of the heat source or ignition source in a short time caused by heat Stress, the use of simulation technology to assess the risk of fire. Glow wire test for

Place of Origin:China

Brand Name:HongCe

Model Number:HWI-1

...Equipment IEC60695 Hot Wire Ignition Tester , HWI Test Equipment Product information: This tester conforms to the standard requirement of IEC60695-2-20. It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time. Hot-wire coil ignition test

Brand Name:BAXIT

Model Number:BXT-GW

Place of Origin:Shanghai, China(mainland)

...Testing Equipment Glow wire tester is designed and manufactured according to the requirements of "Glow Wire Test Method" in IEC60695, GB5169.10-11 and GB4706.1. It is suitable for electric fire electronic products, household appliances and their materials for ignition hazard test, simulating hot elements or Thermal stress caused by a heat source or an ignition source such as an overload...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-C527-1

...Testing Machine , Adhesive Tape Shear Adhesion Testing Equipment Specifications Adhesive tape shear adhesion testing machine 1.Temperature Controller:PID control 2.Safety Device:Overheating or power overload protection 1. Product description Adhesive tape shear adhesion testing...

Brand Name:YUYANG

Model Number:YY617

Place of Origin:China

... retardancy of coal mine flame-retardant cable" standard. It is used to test the combustion characteristics of MT 818-2009 "Coal Mine Cable" under overload conditions. . Structure: 1. Control chamber, equipped with power source and thermometer, which can

Brand Name:Haida

Model Number:6002-HD

Place of Origin:China

... for parts or components under fault or overload conditions. It applies to plastic and non-metallic insulating materials used in electrical and electronic products, components, and household appliance parts, such as switch ...

Brand Name:DAXIAN

Model Number:DX8521

Place of Origin:China

... parts of the poor contact with overload, fault current and other reasons, it may cause a fire, this instrument is to simulate the electrical and electronic products in the fault conditions under the fire caused by a small ...

Brand Name:YUYANG

Model Number:YYW-012

Place of Origin:China

... equipment which are not fixed live parts but which provide insulation against electric shock and for the insulation of fixed safety extra-low voltage parts. Imitation products due to fault conditions within the high temperature, such as overload,

Brand Name:Infinity Machine

Model Number:S6440

Place of Origin:Made in China

...Testing Equipment, Clamp Force Tester Machine Model:S6440 Applications: Packing Clamp Handling Testing Equipment is designed to measure the deflections of product packages and protective capacity of packages for product when suffering level pressure in the process of transportation and storage to improve the quality of product package. Test...

Brand Name:KRE

Model Number:KE8302M

Place of Origin:China

... voltage transformer. Features: Meter positions can be chosen from 3 - 48 Auto protection of short circuit of voltage, open circuit of current, and overload. Test of neutral current (optional) Auto mark locking increases the efficiency of

Brand Name:Btutest

Model Number:JJ-1 JJ-1A JJ-1B

Place of Origin:Made in China

...Testing Equipment Description: The overhead stirrer consists of driven motor, Controller and the moment institutions and other components. The Stirring speed is controlled by a microprocessor that can compensate for any sudden speed change caused by overload...

Brand Name:KINGPO

Place of Origin:Mainland China

...conforms to the standard requirement of UL746A. This device simulates the thermal stress caused by the heat source or ignition source such as the glowing elements or overload power within the short period of time, applicable to the fire hazard test for the

Brand Name:HOOHA

Model Number:ZY6055

Place of Origin:China

... within the device may be ignited by a hot wire or a hot element. Under certain conditions, such as the failure current, component overload, and adverse contact of the conductor, some elements will reach a certain temperature and ignite the parts nearby.

Model Number:TZ-80ZY+

Place of Origin:Guangdong, China

...reliable. It has protection devices such as over-current, over-voltage, overload and so on. BRIEF TZ-80ZY/+ type vibration table is electromagnetic sweeping three-axis vibration table developed to meet the market demand. It has the ...