4 0ghz dc dummy load

Brand Name:Vinncom

Model Number:VN-LD-4G-5W-OPM

Place of Origin:CHINA

...DC-3.8/4.0GHz RF Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy

Brand Name:Vinncom

Model Number:VN-LD-4G-30W-OPM

Place of Origin:CHINA

30 Watts DC-3.8/4.0GHz 4.3-10 Male RF Dummy Load Better heating shrink Wide band Good VSWR Part Number VN-LD-4G-30W-OPm Operating Frequency ( ...

Brand Name:ZENITHSUN

Model Number:DRLB

Place of Origin:China

50kW 650V-1000V,DC Portable Variable Resistive Dummy Load Banks Cabinet Structure 1.An assembly-type enclosure contains DR series or DQ series or AS series or other high power rating ...

Categories:RF Termination Load

Country/Region:china

FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) DC-4000 VSWR ≤...

Brand Name:ZD

Model Number:ZD-DL-3GHz-300W-NF

Place of Origin:China

DC-3GHz 300 W N Female Connector Coaxial RF Dummy Load with 50 Ohm RF dummy load introduction: N male RoHS Aluminium black oxide dc 3GHz 5W 50 ohm RF dummy load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load instead of an actual antenna, the transceiver can be tested and configured without radiating radio waves. N male RoHS Aluminium black oxide dc

Brand Name:LENOLINK

Model Number:LD10-DIN

Place of Origin:CHINA

... termination to properly terminate the output port of a device or to terminate one end of an RF cable. Lenolink Termination loads are characterized by low VSWR, high power capacity and performance stability. Widely used for GMS/DCS/UMTS/WIFI/WIMAX etc.

Place of Origin:Hebei,China

Brand Name:Triumph Load

Model Number:48V 200A battery test dummy load bank

Introduction 48V 200A battery test dummy load bank (namely battery discharger, battery load bank, battery discharge tester), is designed for the capacity test and maintenance of continuous battery sets through intensive discharging. The unit features in ...

Model Number:ZCT-100SN-6T

Place of Origin:Chengdu,China

Brand Name:Zysen

100W DC-6GHz N type Coaxial Termination ​DC-3GHz, 6GHz,12GHz,18GHz are available with N connector, SMA are available up to 40GHz. Zysen also offer a series Coaxial Termination frequency up to 67GHz , Power handling from 0.5 to 2000watts,connector SMA,N, 2....

Brand Name:DALEE

Model Number:DL50011209

Place of Origin:Guangdong,China(Mainland)

...dummy load with gold flash Product Details: Product name: DALEE RF Connector Secification: 1-4 generation Type : Female Certification: ISO9001,UL,ROHS and the latest REACH Voltage Rating: 60 VAC Operating Temprature: -40℃ - +85 ℃ Nominal Characteristic Impedance: 50 ohm Applicable Frequency: DC~6 GHz Vspr: 1.3 MAX.(DC...

Brand Name:YLT

Model Number:Terminations

Place of Origin:China

Coaxial Fixed Terminations Series 50Ω 5w Connector N DC-12.4 Max VSWR1.25 21×33.5mm Coaxial fixed terminationsabsorb RF＆ microwave energy and are commonly used as dummy loads of antenna and transmitter. Also used as mach ports in many multiport ...

Brand Name:Sinoscite

Model Number:SNSD-204-060420

Place of Origin:Sichuan, China

Waveguide Load Coaxial Rf Waveguide Components Microwave Component Place of Origin China Brand Name Sinoscite Feature low vswr Working freq. 26.5-40.0GHz VSWR <1.25 Power 300W Insertion Loss <0..8dB Bandwidth: <18% Connector BJ320

Brand Name:ELT

Model Number:TNCA-50JR-2W

Place of Origin:Shaanxi, China

..., 50Ω impedance, VSWR 1.4:1 (max) for DC~18GHz, 500 cycles durability and -55°C~+125°C operating temperature. The low-power matched RF load designed and produced by Xi'an Elite Electronics has an impedance of 50 Ω, including SMA, SSMA, SMP, SSMP, CSMP,

Brand Name:HICORPWELL

Model Number:SMA-K Calibrator

Place of Origin:China

... load ＜-32dB(Return Loss) Material Gold-plated brass Connecting Interface SMA Torque value 0.9 N/m The idea is to create correction ...