4n insulation sleeve abrasion test apparatus

Brand Name:Sinuo

Model Number:SN2128-3

Place of Origin:China

...limitations: Insulating sleeve for plug pin. Test purpose: Suitable for testing the wear resistance of plug insulation sleeves Test principle: The motor drives the eccentric mechanism to achieve reciprocating scraping of the latch sheath. Structure: It

Brand Name:SHC

Model Number:SC-HT28

Place of Origin:China

... Figure28. It is used to test the abrasion resistance of the insulating bushing of the bolt. This device comprises a horizontally disposed beam, which is pivoted about its centre point. A short length of steel wire, 1 mm in ...

Place of Origin:China

Brand Name:KeRang

... to test the abrasion resistance of the insulating bushing of the bolt. This device comprises a horizontally disposed beam, which is pivoted about its centre point. A short length of steel wire, 1 mm in ...

Brand Name:HongCe

Model Number:HC9926

Place of Origin:China

Plug Socket Tester for Insulation Sheath Abrasion – Durable Plug Insulation Wear Testing Equipment for Safety Compliance Product introduction With the increasing presence of smart home appliances, small electrical appliances, and power banks in homes, ...

Brand Name:HJ

Model Number:HC9926

Place of Origin:China

Insulation Sleeves Of Plug Pins Abrasion Test Apparatus Single Station Load 4N Standard of Insulation Sleeves Of Plug Pins Abrasion Test Apparatus: IEC 60884-1 2013 clause 24.7 and figure 28, BS1363-1 figure 9 Application of Insulation Sleeves Of Plug Pins Abrasion Test Apparatus: This device is use for test the abrasion resistance strength of insulation sleeve of plug pins Feature Insulation Sleeves Of Plug Pins Abrasion Test Apparatus...

Brand Name:kingpo

Model Number:KP-GC012

Place of Origin:china

...ABRASION TEST APPARATUS FOR INSULATION ON INSULATED PIN PLUGS Standard: IEC 60884-1- figure 28, BS1363-1 figure 9, EN50075, AS/NZ3112 Application: This device is use for test the abrasion resistance strength of insulation sleeve of plug pins Test sample: Insulation Sleeve...

Brand Name:PEGO Electronics

Model Number:PG-SCA

Place of Origin:China

....4.2 and figure 7, DIN72551-5, QC/T-730, JASO D611-94 and VW60306 for testing the auto cables resistance to scrape abrasion. The apparatus consisted a device to abrade the surface of the insulation of the test sample and a counter to record the numbers of

Brand Name:SKYLINE

Model Number:SL-TESI

Place of Origin:China

... in sleeve, tubing or tape. The effectiveness of the sleeve is determined by measuring the temperature difference of a black ceramic cylinder and with and without protective sleeve. Composition Hot box (annex 2) Internal dimensions of 500 x 500 x 500 mm.

Brand Name:DAXIAN

Model Number:DX8403

Place of Origin:China

... or round insulated cores at low temperature. The manual low-temperature impact test device is used to measure the samples of wire and cable insulation and jacket, plugs and sockets, insulating electrical sleeves and accessories for construction. After

Brand Name:Kinte

Model Number:WH-8813G

Place of Origin:Guangdong,China (Mainland)

...Testing Equipment 4N For Abrasion Resistance Test​ Overview The test device according to VDE-0620-1: 2002.01 standard requirements of the corresponding design and manufacture, testing bolt insulation coating wear test. The device is equipped with a touch screen with a finger operation is simple and convenient, accurate reading, is the plug insulation wear-resistant test...

Brand Name:VOUCH

Model Number:5201

Place of Origin:CHINA

Abrasion Wet Wheel Tracking Equipment Leakage Test Standard IEC60112 7 Inch Touch Screen Control Introduction: The tracking index tester is in accordance with GB4207, IEC60112 standards. It is suitable for lighting, low voltage electrical equipment, ...