50db coaxial fixed attenuator

Brand Name:CWJ

Model Number:CFA

Place of Origin:China

... from us. HengDa Microwave supplies a wide selection of high quality Fixed Attenuators ranging from 2 W to 10 kW in standard Attenuation values of 3, 6, 10, 20, 30, 40 and 50 dB. Please call us with your requirements and discuss your needs with one of our

Brand Name:YLT

Model Number:Attenuators

Place of Origin:China

Coaxial Fixed Attenuators 100w 50Ω N Connector Max VSWR 1.3 1.35 1.4 DC-6 DC-3 200×142×65mm Coaxial fixed attenuators are used in absorbingenergy of transmission line ,expanding power range and controlling power level, also used in accurately measuring power or spectrum of RF microwave transmitters accompany with small power meter, comprehensive tester or spectrum analyzer. Model Power Rating(W) Frequency(GHz) Max VSWR Attenuation...

Brand Name:SWT

Model Number:SW- DTS200G(F)(-E)

Place of Origin:China

200 W Coaxial Fixed Attenuators DC-18 GHz Connector N,TNC Description The coaxial fixed attenuator is suitable for any need to reduce the power level or circuit matching, can quantitatively absorb the energy in the transmission line, extend the power range...

Categories:RF Attenuator

Country/Region:china

Features: ★Wide frequency band, wide coverage ★PIM optimized design. ★Ideal for all kind of DAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) DC-3800 VSWR ≤ 1.25 ...

Model Number:ZSJXX-50SN-xT

Place of Origin:Chengdu,China

Brand Name:Zysen

...Fixed Attenuator Zysen's 50W attenuators available with DC-3GHz, DC-6GHz, DC-12.4GHz, DC-18GHz, 50 impedance & SMA, N Female/Male connectors. Available with 1, 3, 6, 10, 20 , 30dB&40dB to 50dB attenutation. Electrical Specifications Frequency Range DC – 6GHz Power 50W CW @ 25~70ºC Attenuation 1~10dB 20dB 30dB 40dB 50~60dB Attenuation...

Brand Name:Terui

Model Number:TRI-2.92MF-2-40-50

Place of Origin:China

...Fixed Attenuators N RF Fixed Attenuator is used to reduce the signal level. The general reason for wanting to reduce the signal level may be to avoid receiving a signal with too high a level in a hierarchical circuit, or to meet the need to control the signal level in an application. n RF Fixed Attenuator usually consists of a resistor network that allows heat to escape at a certain rate. As a RF Fixed Attenuator...

Brand Name:ZD

Model Number:ZD-AT-3.8GHz-50w/3dB-NM/NF

Place of Origin:China

rf fixed attenuator DC-3800MHz 50Ohm 50w rf NM/NF n male to female 3 dB attenuator Coaxial fixed attenuators are used in absorbing energy of transmission line, expanding power range and controlling power level, they are also used in accurately measuring ...

Brand Name:INTEPON

Model Number:Adapter type fiber attenuator

Place of Origin:China

...attenuator, FC adapter type, 1260~1650nm, 1dB, 3dB, 10dB fixed attenuation. The attenuation of the adapter fiber attenuator is fixed. It is different from the in-line variable attenuator. The appearance of it likes the standard adapter but it's not the same thing. The fixed attenuator can be used for fiber patch cord in a light link. Features Structure: Adapter type Attenuation: 1dB, 3dB, 10dB High return loss: return loss ≥50dB...

Brand Name:Vinncom

Model Number:VN-AT-18G-150W-ONx

Place of Origin:China

...Coaxial Fixed Attenuator Low standing wave High attenuation accuracy High indicator stability Part Number VN-AT-18G-150W-ONx Operating Frequency DC-18 GHZ Impedance ( Ohm ) 50 Application Indoor & Outdoor Degree of Protection IP65 Handling Power (Watt, max) 150W Interface N Male-N Female Operating Temperature ( ℃ ) -40 ~ + 80 Attenuation...

Brand Name:RY

Model Number:RY-051101

Place of Origin:China

Electrical Characteristics: 2W DC-6GHz SMA Male to SMA Female Coaxial RF Attenuator, 1/2/3/5/6/10/15/30db Attenuator, SMA Fixed Connectors Gold Plated Attenuator Temperature Range -55~+155°C (PE Cable -40~+85°C) Impedance 50Ω Vibration 100m/S2 (10~500Hz...

Brand Name:CFO

Model Number:fiber optic attenuator

Place of Origin:China

...Fixed Attenuator White For CATV , Female - Male Fiber Optic Attenuation Fiber Optic Attenuator is used in a wide variety of applications and can satisfy almost any requirement where a reduction in power is needed. 1. Features: Fixed Attenuator(Fixed Type FC, SC, ST, LC) Female to male type ( FC, SC, ST, LC) In-Line Attenuator(Fused and Fiber Jumpers Type) High Return Loss(In-Line and High RL Type) Exact and Stable Attenuation...

Brand Name:YINGDA

Model Number:ATTN-LCA-01-B05

Place of Origin:china

... type, the other end is adapter type (known as male to female) . Male to female type fixed attenuator is mainly applied to the optical link optical power attenuation in order to get the target required power. It mainly have types: SC, LC, FC, ST, MU.

Brand Name:Geehe Comm

Model Number:GH-AT-SM-007

Place of Origin:Wuhan,China

...Fixed Attenuator For WDM Product Description: This Fiber Optic Attenuator, Fixed - SC/UPC 20dB is necessary to prevent over saturating an optical receiver when the optical power is too high. Using attenuators will ensure low bit error rates and prevent damage to receiving components. SC male-female, 20db Geehe's Male to female fiber optic attenuators is doped fiber attenuators...

Categories:Fiber Optic Attenuator

Country/Region:china

... power. It is mainly used in the index measurement of optical fiber system, signal attenuation of short-distance communication system and system test. The product features are light weight, small size, high precision, good stability, easy to ...

Brand Name:Vinncom

Model Number:VN-AT-18G-2W-ON

Place of Origin:China

Attenuator is a kind of electronic components to provide attenuation, widely used in electronic equipment, its main purposes are : (1) adjust the size of the signal in the circuit;(2) in the comparative method measurement circuit, can be used to directly ...

Place of Origin:Jiangsu,China

Model Number:SMA-JK1W3G

Brand Name:OEM is available

... quality RF attenuator with low VSWR and low power. All kinds of N type male and female fixed attenuators. The average power ratings from 1 - 300 watts available in 3, 6, 10, 20 & 30 dB. Fixed attenuators from 1 Watt to 300 Watts Fixed attenuators from

Brand Name:OEM or OMC

Model Number:ST Female to Male Fiber Optic Fixed Attenuator

Place of Origin:China

... at the receiver. Female to male Fixed attenuators from us offer defined control of optical signals in both integrated and add-on products. Depending on the project or need, fixed attenuators can limit (attenuate) the amount of light passing through to

Brand Name:UNIFIBER-OEM

Model Number:UNFAFCU

Place of Origin:CHINA

... cable by controlling the amount of signal loss that is passed through the signal. Commonly used attenuation range is from 1dB to 20dB.The most commonly used type is female to male plug type fiber optic attenuator, it has the optical fiber connector at

Brand Name:FOCC

Model Number:FOCC - ATT004

Place of Origin:China

...Fixed Attenuator Dual Wavelength This kind of FC fiber optic attenuator is used in FC connections. FC fiber optic attenuators feature a proprietary type of metal-ion doped fiber which reduces the light signal as it passes through. This method of attenuation...

Brand Name:HILINK

Model Number:HL-FA-SM-LC-FM-5

Place of Origin:China

...Attenuator Male to Female Fixed Attenuator 1db 5dB 10dB 20dB 25db Product Description Hlink attenuators are mainly used in fiber optic to debug optical power performance & optical instrument calibration correction & fiber signal attenuation. All parts of the attenuator canassemble well without difficulty. It is easy and comfortable to plug in and pull out the connector from these attenuators...