576f fiber optic breakout cable

Brand Name:TAKFLY

Model Number:MPO/MTP Patch Cord

Place of Origin:Shenzhen, China

...576F MTP/MPO - MTP/MPO Multi-mode OM3 OM4 Fiber Optic Breakout Cable The MPO connector offers up to 12 times the density of standard connectors, providing significant space and cost savings. MPO connectors utilize precision molded MT ferrules, with metal guide pins and precise housing dimensions to ensure fiber alignment when mating. The MPO can be mass terminated in combinations of 4, 8, or 12 fiber ribbon cables...

Brand Name:FiberMania

Model Number:SASAS-SM012RBEYL

Place of Origin:Shenzhen, China

... on both ends with handle. The design of breakout patch cable with handles allows for less space occupation in the cabinet. Compared to traditional patch cables, it enables better vertical management and saving space, achieving high-density cabling.

Brand Name:KCO, Kocent Optec Limited

Model Number:Indoor cable, Indoor-duplex

Place of Origin:Guangdong, China

.... - Adopted to indoor distribution - Can be installed conveniently and perated simply. Indoor fiber optic cable Characteristics: - Duplex Zipcord fiber optical breakout cable single mode tight buffered - Round construction. - Soft and easy to strip. -

Brand Name:AIXTON

Model Number:AXT-Breakout Cable

Place of Origin:CHINA

...Breakout Fiber Optic Cable 48 96 144 Cores Distribution Wire Indoor Breakout Fiber Optic Cable GJBFJV 12 24 36 48 96 144 Cores Distribution Cables 2 to 12 fiber Breakout Cable is composed of 2 to 12 buffer tubes, aramid yarn, an aramid ripcord, and a PVC outer jacket. Each buffer tube consists of a 900um tight buffered optical fiber...

Brand Name:H-LIN

Model Number:Breakout 12C

Place of Origin:Shenzhen China

...Fiber optic breakout cable singlemode yellow color jacket GJBFJV(H) multi-purpose break-out cable use simplex cable (900μm tight buffer fiber, aramid yarn as strength member) as subunit. A fiber reinforced plastic(FRP) locates in the center of core as a non-metallic strength member. The subunits are stranded around the cable core. The cable is completed with a PVC or LSZH jacket. 2.1 Technical Parameters Cable Code Cable Diameter mm Cable

Place of Origin:Shenzhen,China

Brand Name:GT-Link

Model Number:Coring,YOFC, J-fiber

... Fiber Optic Breakout Cable Multi Fiber Break-out Cable use simplex cables as subunit, A fiber reinforced plastic (FRP) locates in the center of core as a con metallic strength member. The subunits are stranded around the cable core. The cable is completed...

Brand Name:HICORPWELL

Model Number:Fiber Optic Pigtail

Place of Origin:China

12 color 0.9mm 2.0M 3.0MM length 1m 2M 5M FC SC UPC SM 12 core fiber optic breakout cable pigtail Fiber cores: Simplex, duplex Fiber diameter(mm): Φ 0.9, &2.0, Φ 3.0 Fiber length; User-defined Fiber type; Singlemode(G. 652, G655), multimode(50/125)/(62.5/...

Brand Name:KCO, Kocent Optec Limited

Model Number:Indoor cable, Indoor-duplex

Place of Origin:Guangdong, China

... Fiber Optic Breakout Cable Single Mode Tight Buffered Indoor fiber optic cable Characteristics: - Hight strength kevlar yarn member. - High quality tight buffered or loose tube. - Round construction. - Soft and easy to strip. Indoor fiber optic cable ...

Brand Name:RUIARA

Model Number:MPO-4LC Duplex

Place of Origin:SHENZHEN,CHINA

... and high-density connectivity in modern data centers. It efficiently converts a single 8-fiber MPO connection (typically 40G/100G QSFP/QSFP+) into four standard 10G LC Duplex links, drastically simplifying cable management and maximizing rack space.

Brand Name:ANC

Model Number:MPO-4xDuplex LC

Place of Origin:China

... International Co., Limited have a flame retardant LSZH sheathing. OM4 MPO to 4xLC Breakout Cables are designed for the transmission of signals around 850nm, are suitable for connecting networking components with each other on optical lanes for example and

Brand Name:Fiberall or OEM

Model Number:FA-IOC-GJFHJY08

Place of Origin:China

...material for fiber optic cable, PE is mainly used in outdoor fiber cable and PVC mainly used in indoor cable. PE is with strong tension and crush resistance, but it is hard and does not easy and convenient to bend. So when the outdoor cable need to be very

Brand Name:UNIFIBER-OEM

Model Number:GJFPV

Place of Origin:CHINA

... strength member for connector tie-off. It's the easiest fiber cable to install where direct termination of connectors to sub-units and direct run to panels and equipment is desired. Application: Central Office Indoor Any Purpose Cable Distribution Used in

Brand Name:MingTong

Place of Origin:Dongguan CHINA

... (If necessary) are standed around a FRP central strength member into a compact and circular cable core. The cable is completed with Polyethylene (PE) jacket. Features Small diameter and light weight Semi-dry core design,easy for splicing ...

Brand Name:OEM

Model Number:MPO/UPC-M-LC/UPC-24F-0.9-0.38M-OM3

Place of Origin:CHINA

... LC connectors at the other side. Between these two parts, there are the 900μm hytrel fiber optical cables. A breakout patch cord like this is usually matched with the MPO cassettes, connecting the backbone cable with the equipment. The modularized and

Brand Name:SHKE

Place of Origin:China

MPO fiber optic breakout cable 8-24core MPO/APC-LC/APC-G657A1 Description: The single-mode and multimode MPO products are multi fiber connectors used in high-density backplane and Printed Circuit Board(PCB) applications in data and telecommunications sys...

Brand Name:DOWELL

Model Number:GJPFJV

Place of Origin:Zhejiang, China

... reinforced plastic(ERP) locates in the center of core as a non-metalic strength member. The sub-units are stranded around the cable core. The cable is completed with a LSZH or PVC jacket.with dry-type water-blocking materials between fiber and sheath.

Model Number:HZDO800F4D02

Place of Origin:Beijing, China

Brand Name:HengzhengTC

Product Description Model Number HZDO800F4D02 Type Passive branch high-speed cable Place of Origin China Province Beijing Quality High quality Features * Meets the requirements of the InfiniBand HDR end-to-end system *Low latency, low insertion loss, low ...

Model Number:FKPAT-015

Place of Origin:China

Brand Name:FONGKO

#detail_decorate_root .magic-0{border-bottom-style:solid;border-bottom-color:#53647a;font-family:Roboto;font-size:24px;color:#53647a;font-style:normal;border-bottom-width:2px;padding-top:8px;padding-bottom:4px}#detail_decorate_root .magic-1{vertical-align...

Brand Name:OEM

Model Number:12F SC APC To SC UPC 9/125 fanout 2.0mm patch cord

Place of Origin:China

... optic electronics. The use of the patch cord provides a quick and easy method for routing fiber patches in data centers, head-ends, cellular hubs and central offices. The 9/125μm OS2 single mode bend insensitive fiber optic cable is less attenuation when

Brand Name:CY COM

Model Number:MPO-LC

Place of Origin:Shenzhen , China

...breakout Cord Optical Fiber 2.0mm MPO to LC Fiber Optic Patch Cable Description MPO/MTP trunk cables are used to interconnect cassettes, panels or ruggedized MPO fan-outs, and easy to rapid deployment of high density backbone cabling in data centers and other high fiber environments reducing network installation or reconfiguration. MPO/MPT trunk cables...