60n coupler withdrawal testing apparatus

Brand Name:HongCe

Model Number:HO6502

Place of Origin:China

... to ascertain the maximum force necessary to withdraw the connector from the appliance inlet and the minimum force necessary to withdraw a single pin gauge from the appliance inlet, it can also for testing connectors for hot conditions and those for very

Brand Name:Sinuo

Model Number:SN2102

Place of Origin:China

... and figure 12. It is used to check the maximum withdrawal force of electric appliances coupler. The minimum withdrawal force is achieved by inserting a single-stage latch through hand-held mode. Technical Characteristics: A. Power source: 120V,50/...

Brand Name:Sinuo

Model Number:SN1013

Place of Origin:China

... fig13, fig14. IEC 62196-1:2014 clause 17.2. Equipment Overview for Switch Socket Interlock Withdraw Force Test Apparatus Test purpose: The structure of the charging interface should allow the charging gun to be easily inserted and pulled out, and should

Brand Name:Pego

Model Number:PG-FT01

Place of Origin:China

...Couplers Testing Equipment Power Cord Bending Test Apparatus with 16A Output Current 1. Introduction Power cord bending test apparatus designs to meet the test requirements of IEC60320-1 clause 22.3, for applying bending test to cord of connectors and plug connectors. The test apparatus is configure with 7 inch LCD touch screen, PLC and step motor. The flexing angle, flexing speed an test...

Brand Name:kingpo

Model Number:KP-BCL04

Place of Origin:china

Harden Steel IEC60884 Figure18 And Figure19 Verification Of Maximum Withdrawal Force Test Apparatus Application: This device complies with the requirements of IEC60884 Figure 18/19, VDE0620, etc. It is suitable for checking the maximum force required to ...

Brand Name:SKYLINE

Place of Origin:China

IS 16805: 2018 Nail Penetration Test Apparatus Nail Penetration Test Apparatus Description: The test should be carried out under the ambient temperature coupler with a thermocouple battery (the contact of thermoelectric is fixed on the large surface of ...

Brand Name:HJ

Model Number:HC9919/HC9920

Place of Origin:China

...’ clause 23.4 and figure 21； IEC 60320-1 ‘Appliance couplers for household and similar general purposes –Part 1: General requirements’ clause 22.3 and figure 7. Application: Connectors/plug connectors shall be so designed that the ...

Brand Name:SHC

Model Number:SC-BC02

Place of Origin:China

... out from the socket assembly. Whether the minimum force required is within the range specified by the standard. Parameter: 1. Standard one-pole 10A, three-pole 10A and 16A test standard plugs each, 10A 16A test standard plugs each, adjustable: 1)

Brand Name:SADT

Model Number:HT-225D

Place of Origin:Beijing

HT-225D Integrated Rebound Hammer OLED Display with Software to PC Introduction HT225D Digital Rebound Apparatus has the following characteristics: integrated design, small in size; adopt non-contact optical coupler sense to realize data collection...

Place of Origin:China

Brand Name:KeRang

... Weight: 10N*1, 60N*1, 20N*2 Conforms to standard: IEC60884Figure 20, VDE0620 Product details: This device conforms to the standard requirement of IEC60884 figure 20. It is for testing cord retention is for check the effectiveness of the retention of the

Brand Name:HEMEI

Model Number:HM2626TS

Place of Origin:China

Block inductors, filter inductors, isolation inductors, compensated inductors Applications Compact fluorescent lamp Television receiver Radio cassette player PC power supply Monitor,audio,VCD,DCD UPS The electronic apparatus The noise rejection Induction ...

Categories:Boards and Tiles

Country/Region:china

...' test Thermal conductivity ≤0.20 W/mk Thermal shrinkage ≤0.5% Fire Resistance Incombustibility A1 Class(GB8624-2006) Fire Resistance limit ≥240minutes Bending Strength ≥10Mpa Impact strength ≥5.0KJ/m2 Screw-withdrawal force ≥60N/mm Freezing