8 chamber drying stenter finishing process

Brand Name:VIROCK

Model Number:VK-NB

Place of Origin:CHINA

...Stenter Finishing Machine , HMI , PLC , Inverter controlled 1. Applications: This machine is suitable for, Heat setting of fabric, Chemical Finishing on fabric, Drying of woven fabrics. 2. Process: Open width entry --- Infrared center device ---- Padder --- Lower overfeeding screw expending ---Upper overfeeding ---- Edge detecting & edge uncurler device --- Pinning-on --- air curtain to homogenize hot & cold air --- Chambers

Brand Name:Jayu

Model Number:Krantz

Place of Origin:China

...Stenter Machine Spares Pin Plate Carbon Steel Material 57mm Center Distance Copper Plate Product Description: High-performance Pin Plates designed as critical spare parts for Krantz Stenter Machines, ensuring precise fabric edge fixation during thermal stabilization, drying, and finishing processes...

Brand Name:ZL

Model Number:ZL-6015

Place of Origin:CHINA

...Chamber Price Environmental Test Chamber.pdf Product Description: Flat UV Curing Machine is used for flat surfaces UV curing, which is mainly for drying solid process and flat surface UV ink drying solid process, such as various of UV ink, UV adhesives, UV paint curing, plastic, glass, hardware. Features: 1. With the high efficiency UV light, it can finish...

Brand Name:SNYNXN

Model Number:FL 300

Place of Origin:JIANGSU CHINA

FL Series One Step Fluid Bed Dryer Granulator Advantages: 1. cGMP Design: 150 grit exterior finish, mirror finish on internal surfaces. The system can meet GMP standard; 2. HEPA air filter: The air filter consists of primary stage, secondary stage and high...

Brand Name:LTPM China

Model Number:LTDG-Series

Place of Origin:China

...drying is finished in the same place. It is easy to operate,and have a good drying effect. 2. The ACRYLIC material is used for the drying chamber door. It is colorless, transparent, and the whole process of lyophilization can be observed. 3. Inflatable (drainage) valves use safety diaphragm valves, which can be connected to an inert gas source, and filled with inert gas after drying...

Brand Name:JingSu ShengMan

Model Number:QGS

Place of Origin:China

...chamber to achieve the objective of drying the materials. The two processes crush and dry are usually complete by two independent operation unit, here we put the two operating unit combined into a device to finish two processes at the same time, it improves

Place of Origin:Jiangsu, China

Brand Name:Welldone

Product Introduction Description Feature 1 Special for lab research, min 20-30ml liquid to finish one test 2 All borosilicate glass for easy visual monitoring of process status 3 Spray chamber, cyclone separator, receiving talk are all made of borosilicate...