9 inch kill manifold

Brand Name:Hebei Pantu

Model Number:YG105

Place of Origin:China

...Inch 15000psi Choke Manifold In Oil / Gas Well Main parameters One end of the device connects with the side flange of the BOP spool. When BOP closes, it can control the finite pressure from the casing by adjusting the choke valve's opening, so balanced drilling can work under minimum pressure difference. Choke Manifold...

Model Number:RIG 021

Brand Name:XI'AN RIG

Place of Origin:China

...kill-line manifolds are the essential well-control devices to control overflow and blow-out,and also to approach the balance pressure drilling .the choke-line manifolds is applicable for controlling casing pressure by use of pressure relief and blowout,and for maintaining the pressure balance inside the well bore and hence protecting the wellhead .the kill-line manifold is applicable for killing operation to pump the killing

Brand Name:SHRT

Model Number:Kill Manifold

Place of Origin:SHANGHAI IN CHINA

Kill manifold is a key part in the control devices of oil/gas well,which has the function that,as the drilling string can not be used for normal operation,the kill manifold shall be used to pump drilling fluid into the well so as to control the downhole pressure,one end of the kill manifold shall be connected with the side hole of drilling spool and teh other end shall be connected with the mud pump. Main technical parameters Name Choke manifold

Brand Name:JC Wellhead

Model Number:2" x 5000 psi Choke and Kill manifold

Place of Origin:China

...Kill Manifold For Oil Well Flow Control with API 6A Valves The chock manifold and the kill manifold are important well flow control equipment for down-hole operation, The design and the manufacture of the choke and kill manifolds conform to API16C standard. The choke manifold and kill manifold is used to carry out near balance drilling. During drilling, the choke manifold and kill manifold...

Brand Name:ZZ TOP OIL TOOLS

Model Number:Kill Manifold

Place of Origin:China

... the risk of fire. Kill manifolds are used to forcibly inject heavy drilling fluid, fresh water and fire extinguishing agent into the well to carry out well-kill operation, prevent well kick, blowout or fire, and fire suppression operation after fired. It

Brand Name:HuiChi (HC)

Model Number:Choke Manifold / Kill Manifold Series

Place of Origin:China

... well kicks and implementing oil and gas well pressure control in oil drilling operations. The equipment implements well-killing operations through the throttling effect of the throttle valve, controls the wellhead casing pressure and riser pressure,

Brand Name:RZY

Brief Introduction to Choke and Kill Manifold The choke and kill manifold is a core component of well control equipment, connected to the blowout preventer (BOP) stack. It is mainly integrated with components such as choke valves and Check ...

Place of Origin:CHINA

...Product Description Kill Manifold Working pressure: 2000PSI~20000PSI Nominal Bore: 2.1/16"~4.1/16" Kill manifold consists of check valves, gate valves, line pipes, pressure gauges. In case of increase in well head pressure, the kill manifold can provide a

Brand Name:TR Solids Control

Model Number:JG-35

Place of Origin:Xi′an, China

... method of mud circulation through the drill pipe is out of control,kill manifold can be directly connected to mud pump to inject mud into wellhead pump,so that control the pressure of oil&gas well. Choke manifold is composed of choke valve, gate valve,

Brand Name:HUIFENG

Place of Origin:CHINA

L-X(-46℃~180℃)Drilling Manifold PSL3-4 Product Introduction Choke and kill manifolds are important equipment for preventing blowout, controlling pressure changes in oil and gas wells, and ensuring the continuous implementation of underbalanced drilling...

Model Number:1" - 4" Swivel Joint

Place of Origin:China

2 Inch Fig1502 Chiksan Swivel Joints Elbow For Choke And Kill Manifold Lines Product Description Product Overview 1.Our Chiksan swivel joints, with integral ball bearing, are manufactured on the basis of technologies from FMC, USA. 2.Various models of ...

Brand Name:Lake

Model Number:All models

Place of Origin:China

... circulation and bleed by opening and closing the gate valve of the manifold or adjusting the choke valve. It also can adjust the pressure between the bit pressure and the casing. They are the tools used for the balance-drilling or the unbalance-drilling.

Place of Origin:China

Stainless steel 2 PC 1/4 inch Ball Valve male to female, WOG1000 Ball valves are much more effective as they reduce the chances of leakages. The ball seals tight against the seats; thus, the fluid pressure is responsible for the sealing action. Features...

Brand Name:DOUBLE-LIN

Model Number:LL9165

Place of Origin:China

1"(2-8 Way) Brass Manifold 16 Bar Description ​Working Pressure 16 bar (232 psi) Working Temperature from -10 ℃ to +95 ℃ (from 14℉ to 203℉) Thread ISO228 (equivalent to DIN 259 and BS2779) Distance between centres 50mm and 3/4''×18 Company Profiles ​​ ...

Brand Name:jm

Model Number:mf0001-25

Distribution Manifold MF0001-25 Forged Brass Body ,Sand Blast Nickel Plated Specification Forged brass boby Sand blast and nickel plated Nominal Pressure:Max.16bar Temperature:-10°C~110°C Threaded ISO228/1 100% leak tested Pipeline:2~10way Dimensions SIZE...

Brand Name:CCSC

Model Number:H2

Place of Origin:China

API 6A high pressure H2 Positive Choke with size range from 2-4 inch Positive choke is suitable for high pressure drilling,well testing and production accompanied with sour gas or / and sand, our positive choke valve is designed and manufactured in ...

Brand Name:Zonco

Place of Origin:China

... to successfully control the kick and implement the pressure control technology of oil and gas wells. When a well kick or blowout occurs, use the valve in the choke manifold to open and close, control a certain back pressure to

Brand Name:HONGSHENG

Model Number:Y-A56

Place of Origin:China

...Manifold For 3/4 Inch Flex Hose Hot Tub Massage Jet Body 2" street x 2" slip x (2) 3/4" Specifications for this item: Brand Name HONGSHENG Part Number Y-A56 Material Type PVC (Polyvinyl Chloride) Size 2 inch Product Dimensions 2" street x 2" slip x (2) 3/4" System of Measurement Inch Shape Water Manifold...