apparatus for abrasion test insulating sleeves

Brand Name:Pego Electronics

Model Number:PG-ATA

Place of Origin:China

...-1 figure 28 and BS1363 figure 9, it is applied to test abrasion resistance performance of insulating sleeves of plug pin. The test apparatus is consisted by horizontally placed beam and a linear motion clamp, the U sharp steel wire with diameter of 1mm is

Brand Name:Sinuo

Model Number:BF2128

Place of Origin:China

... 24 Figure 28. It is used to test the abrasion resistance of the insulating bushing of the bolt. This device comprises a horizontally disposed beam, which is pivoted about its centre point. A short length of steel wire, 1 mm in ...

Brand Name:kingpo

Place of Origin:china

Bs1363-1:1995 Figure 9 | Apparatus For Abrasion Test On Insulating Sleeves Of Plug Pins

Brand Name:HongCe

Model Number:HC9926

Place of Origin:China

...Testing Equipment Insulating Sleeves Of Plug Pins Abrasion Test Apparatus with 9mm Stroke Standard of Apparatus for abrasion test on insulating sleeves of plug pins: IEC 60884-1: 2022 Plugs and socket-outlets for household and similar purposes -Part 1: General requirements clause 24.8 and figure 31; The Apparatus for abrasion test on insulating sleeves of plug is designed to evaluate the wear resistance and reliability of the insulation

Brand Name:HJ

Model Number:HC9926

Place of Origin:China

Insulation Sleeves Of Plug Pins Abrasion Test Apparatus Single Station Load 4N Standard of Insulation Sleeves Of Plug Pins Abrasion Test Apparatus: IEC 60884-1 2013 clause 24.7 and figure 28, BS1363-1 figure 9 Application of Insulation Sleeves Of Plug Pins Abrasion Test Apparatus: This device is use for test the abrasion resistance strength of insulation sleeve of plug pins Feature Insulation Sleeves Of Plug Pins Abrasion Test Apparatus...

Brand Name:SHC

Model Number:SC-HT28

Place of Origin:China

... Figure28. It is used to test the abrasion resistance of the insulating bushing of the bolt. This device comprises a horizontally disposed beam, which is pivoted about its centre point. A short length of steel wire, 1 mm in ...

Place of Origin:China

Brand Name:KeRang

... to test the abrasion resistance of the insulating bushing of the bolt. This device comprises a horizontally disposed beam, which is pivoted about its centre point. A short length of steel wire, 1 mm in ...

Brand Name:SKYLINE

Model Number:SL-TESI

Place of Origin:China

... in sleeve, tubing or tape. The effectiveness of the sleeve is determined by measuring the temperature difference of a black ceramic cylinder and with and without protective sleeve. Composition Hot box (annex 2) Internal dimensions of 500 x 500 x 500 mm.

Brand Name:DAXIAN

Model Number:DX8403

Place of Origin:China

... or round insulated cores at low temperature. The manual low-temperature impact test device is used to measure the samples of wire and cable insulation and jacket, plugs and sockets, insulating electrical sleeves and accessories for construction. After

Brand Name:VOUCH

Model Number:5201

Place of Origin:CHINA

Abrasion Wet Wheel Tracking Equipment Leakage Test Standard IEC60112 7 Inch Touch Screen Control Introduction: The tracking index tester is in accordance with GB4207, IEC60112 standards. It is suitable for lighting, low voltage electrical equipment, ...