bending test apparatus

Brand Name:PEGO

Model Number:PG-FT01

Place of Origin:China

... to IEC62196-1 clause 26.4 figure 20 and table 14, it is applied to do mechanical load flexing test of the non-rewirable accessories of ev plug and vehicle connector. Test method: The sample is fixed to the oscillating member of the apparatus so that at

Brand Name:Sinuo

Model Number:SN1112E

Place of Origin:China

... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to ...

Brand Name:HongCe

Model Number:HDX1316

Place of Origin:China

... of cord of appropriate length shall be fixed in the apparatus as shown in figure 2, and loaded with a weight having a mass of 0,5 kg. A current of about 0,1 A shall be passed through the conductors. The sample shall be bent backwards and forwards in a

Brand Name:HJ

Model Number:HDX1307

Place of Origin:China

... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a

Brand Name:Sinuo

Model Number:SN1112E

Place of Origin:China

...IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to ...

Brand Name:Kingpo

Model Number:KP-CB02

Place of Origin:China

...Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under low temperature conditions, and is suitable for outer diameter less than or equal to 12.5mm round wire and cable or round insulated wire core is the wire and cable industry to test the bending...

Brand Name:AI

Model Number:AIBXW-16

Place of Origin:CHINA

...bending test apparatus is applicable to the bending test of various enameled flat wires, paper wrapped flat wires, glass fiber wrapped flat wires, film wrapped wires and other electromagnetic wires with a wide edge of less than or equal to 16mm, as well as the corresponding copper and aluminum flat wires. Major Technical Parameters Bending...

Brand Name:SHC

Model Number:SC-ASF2.8

Place of Origin:China

...Bending Test AS / NZS 3112 Figure 2.1 dimensions of plugs Figure 2.2 apparatus for flexing test Figure 2.3 form of pin Figure 2.4 dimensions of insulation on insulated live pins Figure 2.5 pressure test apparatus for insulation on insulated plug pins at high temperature Figure 2.6 impact test apparatus for insulation on insulated plug pins at low temperature Figure 2.7 abrasion test apparatus...

Brand Name:RECEN

Model Number:RC-TM-003

Place of Origin:China

... stretching, compression, bending, shearing and other tests. Applicable standards: meet relevant test standards such as GB / T228.1-2010, ISO, ASTM, etc. Features: 1. The testing machine adopts four-column, double-space frame structure, which has the

Brand Name:Lonroy

Model Number:LR-Q002

Place of Origin:China

...Bending Testing Machine Flexible Tester Tensile Test Apparatus 1. Product Description The main design of this machine is to conduct repeated bending tests on FPC wiring, with certain speed, stroke, (angle), and count conditions for back-and-forth bending tests.The main design of this machine is composed of AC servo motor, imported linear slider, PLC program, touch screen, steel, etc. It is a professional testing...

Brand Name:KINGPO

Place of Origin:China

...Adjustable Bend Angle Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a ...

Brand Name:HTI

Model Number:TX-513

Place of Origin:Guangdong,China(mainland)

...Test Apparatus Footwear Testing Equipment in Laboratory Description: Sole adhesive or suture zone in the surface of canvas, cloth tape and then set the wheels of this machine, start the wheels, shoe soles that are bent, bending, after a certain number to view the damage and fracture shoe case, in order to understand their resistance to bending properties. Specification: While test...

Brand Name:ASLI

Model Number:AS-PC-10000

Place of Origin:China

..., leather belt composite, plastic profile, waterproof coil, steel pipe, copper, profile, spring steel, Stretching, compression, bending, shearing, peeling, tearing,

Brand Name:PERFECT

Model Number:PT-1176S

Place of Origin:Dongguan, Guangdong,China

... is also called universal testing machine. with different grips, tensile tester could do lots of tests, such as tensile strength test, tear strength test, peel strength test , compression tester, 3 point bend test, 4 point bend test, elongation test,

Brand Name:HAIDA

Model Number:HD-B609

Place of Origin:Guangdong, China (Mainland)

...), release paper, plastic films, leather, rubber & plastic, paper, fiber, etc. 2. Different test with different grips: tensile, peel, tear, heat seal, adhesive, bend and open force. 3. Deformation under defined load: Test deformation under defined load of

Brand Name:MIYU

Model Number:MY-XC-C6

Place of Origin:China

...Bending Tester (MY-XC-C6), with competitive price, both OEM and ODM available from us Technical Specification 1. R angle :R3,R5,R12.7, replaceable fixture 2. Test speed: 5-60 times / min, adjustable 3. Test times:99999999 times 4. Rotation mode: positive turn mode, reverse mode, positive and reverse mode 5. Test mode: Conduction test , Life test 6. Counterweight: 50g ,100g , 200g , 300g , 500g, each six 7. Test...

Brand Name:VOUCH

Model Number:5114

Place of Origin:CHINA

... test, combustibility test of electronic industry, home electronic appliance and materials. The glow wire apparatus and common test procedure is to simulate the effect of thermal stressed witch may be produced by heat sources such as glowing elements or

Brand Name:PTE

Model Number:WAW-600E WAW-1000E

Place of Origin:China

...testing apparatus+tensile testing machine price Ⅰ Name and type of equipment Electromechanical universal testing machines,Compression universal testing machine/tensile Ⅱ Application of equipment This machine is applied in analysis and research of statics property testing of tensile, compression, bending...

Brand Name:Infinity Machine

Model Number:T6330

Place of Origin:Made in China

...Testing Apparatus for Open-and-closed Notebook Hinge Torsion Test Apparatus for Lab Testing Machine Purpose: Laptop hinge torsion test equipment is suitable for laptop, ultrabook, monitor and the other electronic products to do the torque test, and the torsion damping life-span test...