cable circuit integrity testing equipment

Brand Name:DAXIAN

Model Number:DX8515

Place of Origin:China

... of the circuit when it is supplied to the fire under a flame of not less than 750 ℃, and is used for the evaluation of the fire performance characteristics of the cable, especially to maintain the integrity of the circuit during a fire. There are

Brand Name:YUYANG

Model Number:YY609

Place of Origin:China

... whether keep circuit integrity under fire conditions. Standards: GB/T19216 Test for electric or optical fibre cables under fire conditions---Circuit Integrity--Procedures and requirement for fire with shock--Cables of rated voltage up to and including 0.6

Brand Name:SKYLINE

Model Number:SL-7606Z

Place of Origin:China

...Cable Circuit Integrity Fire Resistance Tester Application The tester is designed according to GB/T 19216.11-2003/IEC 60331-11:1999 "Line integrity test of cables and optical cables under flame conditions Part 11: test apparatus - individual fire supply with flame temperature not lower than 750℃". It fully conforms to GB/T 19216.21-2003/IEC 60331-21:1999 "Line integrity test of cables and optical cables under flame conditions" Testing

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

...Cable Circuit Integrity Fire Resistance Testing Machine For Fire Safety And Regulatory Agencies In the field of electrical engineering and fire safety, the IEC 60331 Cable Circuit Integrity Fire Resistance Testing Machine is a crucial apparatus. It is designed to evaluate the ability of cables to maintain circuit integrity...

Brand Name:HTI

Model Number:HTB-046

Place of Origin:Guangdong,China(Mainland)

... whether keep circuit integrity under fire conditions. Standards: GB/T19216 Test for electric or optical fibre cables under fire conditions---Circuit Integrity--Procedures and requirement for fire with shock--Cables of rated voltage up to and including 0

Brand Name:AI

Model Number:CFRTM

Place of Origin:CHINA

Circuit Integrity Under Fire Conditions Testing Equipment INTRODUCTION This cable fire resistance testing equipment to be used for testing cables required to maintain circuit integrity when subject to fire alone or fire with shock where the test condition is based upon flame with a controlled heat output corresponding to a temperature of at least 750˚C or fire with shock at a temperature of at least 830 °C. ​IEC 60331 Test for electric cables

Brand Name:ZL

Model Number:ZL-1048

Place of Origin:China

... test bench includes the following parts) 1.1 Cable Support System 1.2 Continuous Detection Device 1.3 Heat Source Cable support system: The cable is clamped horizontally at both ends of the cable sheath by a clamp. The middle part of the cable is fixed by

Brand Name:LAB TECH

Model Number:CFRT

Place of Origin:China

... circuit integrity when subject to fire alone or fire with shock where the test condition is based upon flame with a controlled heat output corresponding to a temperature of at least 750˚C or fire with shock at a temperature of at least 830 °C.​

Brand Name:RISING

Model Number:RS-TC

Place of Origin:China

... of the cable-circuit. Once the circuit breaks down and without punctually examination and repairing, it will no doubt trigger the mass economic loss and bad social influence. So the electric fault measuring testing instrument is a very important tool. The

Brand Name:SAMYON

Model Number:LPT

Place of Origin:CN

...Integrity Testing Equipment Imported Accelerometer Lpt Low Strain Pile Integrity Testing Equipment's Introduction Characteristic Pile Integrity Testing Equipment's Standard Characteristic The accelerometer of the Pile Integrity Testing Equipment is imported from America, with its stable function and high precision. The Pile Integrity Testing Equipment's sampling length is 4096points, the Pile Integrity

Brand Name:I-suntop

Model Number:GSS-1000

Place of Origin:China

...Cable Water Penetration Test Equipment I-suntop Optical cable mechanical testing equipmen... 1. Usage of IEC-60794-1-2 Standard Fiber Optic Cable Water Penetration Test Equipment: This equipment is suitable for testing the wear resistance of optical cable sheath and optical cable mark 2. Specifications of IEC-60794-1-2 Standard Fiber Optic Cable Water Penetration Test Equipment...

Brand Name:HongCe

Model Number:PST-1

Place of Origin:China

... IEC60335-1:25.15. The test equipment is mainly applied for testing the power cord tension and torque at the terminal two trials of the appliances which are with a power cord, and intended flexible cord permanently connected to the fixed ...

Brand Name:Sinuo

Model Number:SN1112D

Place of Origin:China

..., and it is also used to test the broken cores of PVC insulated cables under load to verify their reliability. Bending Test A sample of vehicle charging cables of appropriate length shall be fixed in the apparatus as shown in figure 2, and loaded with a

Brand Name:GAOXIN

Model Number:GX-6055-CSM

Place of Origin:Guangdong China

....3 and the Japanese industrial standard JIS C 8714:2007. The simulated battery is subjected to forced internal short-circuit test under certain ambient temperature conditions or extruded test under normal temperature conditions. The test box inner box is

Brand Name:Gold

Model Number:PIT Test

Place of Origin:Chongqing, China

... hidden safety hazards and reliably determine the carrying capacity of the project pile. Low strain non-destructive pile Integrity test method is suitable for detecting the integrity of the pile body of the concrete pile, and the degree and location of the

Brand Name:GTJ

Model Number:GTJ-800

Place of Origin:China

...Integrity Test Equipment Pile Foundation Dynamic Test GTJ-P800 pile dynamic tester Introduction: The pile dynamic tester is used for pile foundation integrity inspection and precast pile piling process monitoring. Under the impact of impact or vibration load, the pile foundation structural integrity and single pile vertical bearing capacity test are tested...

Place of Origin:China

Brand Name:Lonroy

...Cable Vertical Flame Test Equipment Product Description Test standard GB18380.11\12\13_2022 "Cable Burning Test under Flame Conditions - Part 1: Vertical Burning Test Method for Single Insulated Cable or Cable Assembly" is equivalent to IEC60332.1-2004. IEC 60332 Single Wire Vertical Combustion Tester Single Electrical Cable Vertical Flame Test Equipment...