cables sheaths iec test equipment

Brand Name:HongCe

Model Number:HDX1307

Place of Origin:China

... bending performance of wire and cable at low temperature. The equipment is mainly composed of low temperature thermostat, winding device and material testing system. It is suitable for circular wire and cable with outer diameter less than or equal to

Brand Name:HJ

Model Number:HDX1308

Place of Origin:China

IEC Test Equipment Cold Elongation Test Equipment with three stations Standard: IEC60811-1-4 common test methods for insulating and sheathing materials of electric and optical cables-part 1-4: Methods for general application-Test at low temperature clause 8.3 and 8.4. Application: It is used to test at low temperature for insulating and sheathing materials of electric cables. Test sample: Rubber, insulating and sheathing...

Brand Name:KINGPO

Place of Origin:China

...: This oxygen bomb aging tester, also called air bomb aging tester, is suitable for the aging test in the oxygen and compressed air to the wire and cable, rubber ( plastic, leather ) insulation and sheathing, as well as other polymer materials under the

Brand Name:I-suntop

Model Number:GSS-1000

Place of Origin:China

IEC-60794-1-2 Standard Fiber Optic Cable Water Penetration Test Equipment I-suntop Optical cable mechanical testing equipmen... 1. Usage of IEC-60794-1-2 Standard Fiber Optic Cable Water Penetration Test Equipment: This equipment is suitable for testing the wear resistance of optical cable sheath and optical cable mark 2. Specifications of IEC-60794-1-2 Standard Fiber Optic Cable Water Penetration Test Equipment...

Brand Name:Sinuo

Model Number:SN2127

Place of Origin:China

... the impact resistance of cable insulation and sheath materials under low temperature conditions. It complies with IEC 60811 and other related international standards, ensuring accurate and reliable results for cable performance evaluation. This device is

Brand Name:SHC

Model Number:SC-FNR40

Place of Origin:China

...set heat insulation tester iec test equipment Abnormal Heat Resistant Insulating Sheath Test Device Figure40 IEC60884 Product details: This device meets the standards of IEC60884-1 figure 40. It is applicable to test improper heating resistance and burning...

Brand Name:YUYANG

Model Number:YY610

Place of Origin:China

...Cable and Wire Vertical Flame Spread Testing Equipment with IEC 60332-1 Description: Single Cable Combustion Tester is the most widely used and lower cost of cable fire performance test equipment, which can meet the standards IEC 60332-1-1:2004 in the provisions of technical indicators and requirements. Single cable combustion Tester is used to test the flame retardant property of the cable...

Brand Name:ZL

Model Number:ZL-1052

Place of Origin:CHINA

...Cable Mechanical Flexing Test Equipment with Standards IEC 227 IEC 245 UL 1581 VDE 0472 Overview: The Wire and Cable Flexing Testing Machine supports multiple test loads, meeting the dynamic flexing test requirements for soft wires and cables by manufacturers and inspection departments. Applicable Standards: Designed and manufactured in compliance with IEC 227-2, IEC 245-2, UL 1581, VDE 0472, IEC 60227-2(ed2)1997, IEC...

Place of Origin:China

Brand Name:Lonroy

IEC 60332 Single Wire Vertical Combustion Tester Single Electrical Cable Vertical Flame Test Equipment Product Description Test standard GB18380.11\12\13_2022 "Cable Burning Test under Flame Conditions - Part 1: Vertical Burning Test Method for Single Insulated Cable or Cable Assembly" is equivalent to IEC60332.1-2004. IEC 60332 Single Wire Vertical Combustion Tester Single Electrical Cable Vertical Flame Test Equipment...

Brand Name:SKYLINE

Model Number:SL-7603C

Place of Origin:China

...Cable Vertical Flame Test Equipment , Specimen Length 600 ± 25mm Description of the instrument IEC 60332 Single Insulated Wire or Cable Vertical Flammability Tester is used for conductor diameter greater than 8mm (cross-sectional area greater than 0.5mm2) or less than 8mm (cross-sectional area less than 0.5mm2) of the single wire and cable...

Brand Name:kingpo

Place of Origin:china

Test Probe B , IEC61032-Figure 2 , IEC test equipment IEC61032 Figure 2, Diameter: 12mm Length:80mm Insulated portion: Ø50mm, 20mm wide,100mm long IEC61032 Equipment list No. Items Description Photo 1 IEC61032 Test Probe A IEC61032 Figure 1 1. Ball Diameter: 50mm 2. Baffle Plate Diameter: 45mm 3. Baffle Plate Thickness:4mm 4. Handle Diameter: 10mm 5.Handle Length :100mm 2 IEC61032 Test...

Brand Name:LAB TECH

Model Number:CFRT

Place of Origin:China

... circuit integrity when subject to fire alone or fire with shock where the test condition is based upon flame with a controlled heat output corresponding to a temperature of at least 750˚C or fire with shock at a temperature of at least 830 °C.​

Place of Origin:China

Brand Name:ALLIED TESTING

Model Number:TP02

... of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision.

Brand Name:Gold

Model Number:GD-EN 50086

Place of Origin:CHINA

IEC 60332-1-2 Single Wire And Cable Vertical Spread Combustion Tester For Insulated Cable Product introduce The single cable vertical combustion tester strictly follows the IEC 60332-1-2 standard and uses a 1 kW premixed flame to test the flame retardant performance of a single wire or cable. It is suitable for various types of power, communication, and optical fiber cables. The equipment is equipped...

Brand Name:DAXIAN

Model Number:DX8330

Place of Origin:China

...cable smoke density testing equipment Application scope : Mainly used to determine the concentration of smoke released by cables and optical cables during combustion under specific conditions. Compliance with standards: Meet the requirements of GB/T17651.1-1998 and IEC61034-1-2 "Measurement of Smoke Density of Cables and Optical Cables under Specific Conditions of Combustion" test standards. Main features: This testing

Brand Name:RISING

Model Number:RS-TC

Place of Origin:China

... of the cable-circuit. Once the circuit breaks down and without punctually examination and repairing, it will no doubt trigger the mass economic loss and bad social influence. So the electric fault measuring testing instrument is a very important tool. The

Brand Name:XZH Test

Model Number:XHLJ504

Place of Origin:China

.... Model NO. XHLJ504 Connectors USB Test Mode Instant Test Usage Audio Cable Tester, Coaxial Cable Tester, Digital Cable Tester Test Region Forming Cable Cable Type Shielded Power Electricity Certification CE, IEC Customized Customized Color Black ...

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

...Wire Burning Test Machine, a crucial vertical flame testing equipment, plays a vital role in evaluating the flammability and fire resistance of single cables and wires. 1. Product Name and Purpose The IEC60332 Single Cable And Wire Burning Test Machine is

Brand Name:Ningbo Suntech Power

Model Number:FK-10KV

Place of Origin:Ningbo，China

10KV Insulation Resistance Tester , Cable Insulation Resistance Testing , Digital Display I. Product Introduction : Insulation resistance tester, also known as megohmmeter, is used for testing insulation resistance. FK-10KV insulation resistance tester...