catalyst silicone release agent

Brand Name:PLYFIT

Model Number:D0201

Place of Origin:Guangdong, China

... agents are used in die cast release, mold release, tire release, plastic release, and concrete release solutions, among other solutions. Spodin Mold Release technology enables quicker release of products made in molds, such as tires and food containers,

Place of Origin:JAPAN

Brand Name:ShinEtsu

Model Number:ShinEtsu KM-9782

...Silicone Release Agent for Food Packaging Containers Product Introduction Basic Properties Shin-Etsu KM-9782 is an emulsion-type silicone release agent designed for food packaging containers. It offers excellent dilution stability and wettability, making it suitable for various substrates while fully complying with environmental standards. Product Overview KM-9782 is a water-dispersible silicone emulsion release agent

Brand Name:Lubekote

Model Number:9700S

Place of Origin:China

...Silicone Rubber Release Agent Product Description Lubekote 9700S is an advanced, water-based release agent system engineered specifically for challenging rubber molding operations. While exceptionally effective as a silicone rubber release agent, its superior formula is also designed for a wide range of elastomers, including Natural Rubber, EPDM, Acrylic Ester, Vinyl Acrylate rubber, and notoriously difficult-to-release

Brand Name:JOYWAY

Model Number:PU-1032

Place of Origin:China

TDS Release agent PU-1032 Mould release agent oil base for the shoe sole Characteristic: The PU-1032 is a kind of release agent which is combined by silicone resin and Silicon oil The main components are MQ Silicon resin and silane. It is mainly used for: ...

Brand Name:HSF

Model Number:36GSSNSi

Place of Origin:China

...applications where a release liner is required. This film is typically made from clear polyester (PET) that is coated with a non-silicon release agent on one side. Here are some common applications for clear PET non-silicon coated release film: 1. Labels:

Brand Name:JT

Model Number:JT616

Place of Origin:HUBEI, CHINA

...Release Agent for Electrical Insulators TDS: Performance parameters: Aspect Unit Value colour and lustre — Transparent liquid Viscosity mPa.s 15 Flash point ℃ 65 Spread rate ㎡ 20-25 Density g/mm3 0.90-0.92 Product Description: JT 6101 Organic Silicon Mould Release agent Features: Good release...

Brand Name:MC

Model Number:TA-01

Place of Origin:CHINA

... for two part liquid silicone. It can be used with condensation tin cure silicones. Thixotropic Agent TA01 will not affect the cure rate of the silicone rubber is used with. The curing process begins as soon as the catalyst is mixed with the base. The

Brand Name:Hensen

Model Number:I75L

Place of Origin:Qingdao, China

... Mould Releasing Agent Release Graphite A Powder Mould Releasing Agent A release agent is an interface coating used on two surfaces that tend to stick to each other to make the surface easy to release, smooth and clean. Mold release agents are used in ...

Brand Name:Upass

Model Number:PE

Place of Origin:CHINA

...Silicone Coated PE Release Film for Membranes and Tapes Product Description: What's Silicone Coated PE Release Film? PE release film is a type of film that is used as a release liner or backing for adhesive materials. "PE" stands for polyethylene, which is a type of plastic. PE release film is typically a thin, flexible, and transparent or translucent film that is coated with a release agent...

Brand Name:LANSEN CHEM

Model Number:LSC-500

Place of Origin:CHINA

...Release Agent for Rubber Product Demolding Product Description: This product is a water-based calcium stearate suspension prepared via a proprietary process. As an outstanding anti-adhesive agent, release agent, and anti-sticking solution, it is ideally suited for rubber and plastic products. This is the LSC - 500 non - ionic calcium stearate white emulsion rubber release agent. As a specialized release agent

Brand Name:EXCEEDCHEM

Model Number:Water Based Release Agent

Place of Origin:China

... Chemical Composition: The water based release agent for shoe Sole is made by special silicone oil, wax liquid and surfactant by special process. 2. Properties Item Index Appearance Milky liquid Solid Content(120° C*...

Brand Name:Yaly

Model Number:HP-1120R

Place of Origin:Guangdong

... on one side or both side.the higher PE and silicon coating on the base paper,the release paper become more glossy & stronger. It is easy to be attached dust during PE and silicon coating process in the dusty workshop,thus will affect the release force. 2.

Brand Name:WENYOU

Model Number:WY-401

Place of Origin:CHINA

..., may cause lung injury,when the fire (such as cigrette)fuel burning goods heated over 250 degrees Celsius, will release potentially harmful smoke. Therefore, do no somke before spraying and wash your hards before spraying. Whether this material is

Brand Name:Tekoro

Model Number:TE-8049

Place of Origin:China

... applications, where post mould painting is not required. This product has a light duty silicone content and is a rapid dry, anti-stick mould release agent suitable for cold and hot moulds. It prevents sticking, which increases the life of does and moulds,

Brand Name:HSF

Model Number:36T5SF-SS-PET

Place of Origin:China

Clear PET 36micron, Non-Silicone Release, High temperature resistant tape, silicone protective film, labels, cellphone. S/N Test Item Unit Standard Value Test Method 1 Thickness μm 36 ±3% 38.01 ...

Brand Name:HUAMEI

Model Number:Silicone Release Film

Place of Origin:CHINA

...PET Silicone Release Film For OCA Special Type Project Eigenvalues Membrance Raw materials PET Color Transparent Width(mm) Customized according to user needs Length(mm) Customized according to user needs Thickness(μm) 25,50,75,100,125 Release Force(g/in)...

Brand Name:KangLiBang

Model Number:C-100AB

Place of Origin:Guangdong, China

...Agent C-100AB,two component platinum addition type cross linking agent which is added in the raw silicones for the cross linking of food and medical grade silicone rubber items ,The vulcanized products can pass the FDA test, ,it features with non-toxic, odourle PRODUCT SPECIFICATION: C-100A: transparent paste, containing platinum and organic silicon polymer C-100B: transparent organic silicon

Brand Name:JUNHE

Model Number:1353

Place of Origin:Changzhou in China

...Release Agent / Zinc Phosphate Pretreatment 80-120 Zinc Stearate Release Agent Introduction Zinc Stearate Release Agent consist of organic acid, non-ion surface active agent and zwitterion free from phosphor and nitrogen. Bath solution compound: Put cold water into the tank till three-quarter with appropriate degreasing agent...

Brand Name:Senzhuo

Model Number:SZ-MM

Place of Origin:CHINA

...-1.24, and the melting point is above 102 ℃. Insoluble in water and dilute alkali. Stable storage. Uses: It is an effective peroxide decomposition agent, often used in combination with main antioxidants, for polypropylene, polyvinyl chloride, as well as