circular stop face test probe

Brand Name:HongCe

Model Number:HT-I02B

Place of Origin:China

...Test Finger Probe B With 125mm Diameter Circular Stop Face Standard description: For blenders, detachable parts, except lids, are not removed. The test is carried out with a test probe similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the test finger and the stop face...

Brand Name:kingpo

Model Number:IEC60335-1- clause 20.2.

Place of Origin:china

... with circular stop face Φ 50 mm 1.Knurled Finger Diameter:12mm 2.Knurled Finger Length:80mm 3.Baffle Plate Diameter:50mm 4.Baffle Plate Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1.

Brand Name:PEGO Electronics

Model Number:PG-TPB

Place of Origin:China

..., instead of the non-circular face. The probe is designed to meet the test requirements of IEC60335-1 clause 20.2, it is applied to verify the mechanical strength of enclosures, guards and simliar parts. 2. Specification Model PG-TPB-1 ...

Brand Name:Sinuo

Model Number:SN2210-2A

Place of Origin:China

... with a diameter of 50 mm, instead of the non-circular face, is intended to verify that the moving parts of appliances shall, as far as is compatible with use and working of the appliance, to be positioned or enclosed to provide adequate protection against

Brand Name:JLX

Model Number:LX-12580

Place of Origin:Made in China

Test Finger Probe with 125mm * 80mm Circular Stop Face The test probe is carried out with a test probes similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125mm and thickness of 80mm instead of the non-circular face, the distance between the tip of the test finger and the stop face...

Brand Name:KingPo

Place of Origin:China

...Test Probe B Finger Length 100mm IEC60335 2 14 Clause 20.2 IEC60335-2-14 Clause 20.2. Test Finger B Product Details Standard description: For blenders, detachable parts, except lids, are not removed. The test is carried out with a test probe similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the test finger and the stop

Brand Name:HJ

Model Number:HT-I02B

Place of Origin:China

...Test Equipment Test Probe With 125mm Diameter Stop Face Standard: IEC 60335-2-14 Household and similar electrical appliances – Safety – Part 2-14: Particular requirements for kitchen machines clause 20.2; IEC 61032 Protection of persons and equipment by enclosures – Probes for verification. Application: It is used to test stability and mechanical hazards for blenders, detachable parts. The test is carried out with a test probe

Brand Name:SHC

Model Number:SC-F2B-F

Place of Origin:China

... Standard test finger with force 1 30±0.2 30±0.2 30±0.2 30±0.2 2 60±0.2 60±0.2 60±0.2 60±0.2 3 80±0.2 80±0.2 100±0.2 80±0.2 4 180±0.2 ...

Brand Name:Rtench

Model Number:PG-1.5-0.4-1.03-1.78-2.4

Place of Origin:China

SMT POGO PIN A basic spring-loaded pin consists of 3 main parts: a plunger, barrel, and spring. When force is applied to the pin, the spring is compressed and the plunger moves inside the barrel. The shape of the barrel retains the plunger, stopping the ...

Place of Origin:China

Brand Name:HUATEC

Model Number:brush

..., internal and external pipe brush probes, probe extension rods Flat Brush Probes Internal Circular Wire Pipe Brush Probe External "C-type" Wire Brush Circular Wire Brush Probe Earth Signal Return Leads Earth Signal Return Lead Most size are available upon

Place of Origin:China

Brand Name:KeRang

...inst to touch the blade. Test sample: Circular saws Feature: Apertures in the guarding system above the guide plate, unless otherwise specified below, shall be designed such that the test probe ‘a’ of figure 105, when inserted at any angle and to the

Brand Name:TESTEX

Model Number:TF225

Place of Origin:China

Stop Automatically Counter Circular Locus Tester By Standard GB / T 4802.1 Application Circular Locus Tester, is to determine surface deterioration and quality of fabrics (wool, chemical fiber, mixed, kitted and woven fabrics). Using an active friction system, fabric is rubbed against a nylon brush and abrasive or an abrasive only under controlled conditions. Results of the test...

Brand Name:Yizhuo

Model Number:FR4 pcb board02

Place of Origin:China

... PCB Board Multilayer Circuit Boards One Stop Services Electronics phone pcb board multilayer pcb circuit boards One-stop services Testing on products Flying Probe Test, X-ray Inspection, AOI Test, Functional test Quantity Min quantity: 1pcs. Prototype, ...

Brand Name:szcx

Model Number:CX-T4D

Place of Origin:china

...Test Probe D ( Test Probe D) is the necessary tool to proceed protecting electric shock test of household and similar electrical appliances. Technical parameters: 1. Wire length: 100 mm 2. Wire diameter: 1.0 mm 3. Circular-baffle diameter: 35 mm 4. Handle diameter: 10 mm 5. Handle length: 100 mm 6. According to IEC 61032 figure 4 (the Test

Brand Name:GW-PCBA

Model Number:PCBA-0133

Place of Origin:Guangdong, China

...Stop PCB Printed Circuit Board Assembly Manufacturing PCBA Product Information Description Copper Thickness: 1oz Base Material: FR-4 Supplier Type:: Factory Copper Thickness:: 1 Oz, 1/2OZ 1OZ 2OZ 3OZ Product Name:: One Stop Electronic Service Surface Finishing: HASL Application: Industry/Medical/Consumer Electronic Solder Mask Color: Green Black Red Usage: OEM Electronics Pcb Test: Flying-Probe PCB Test...

Brand Name:GESTER

Model Number:GT-KC52

Place of Origin:CHINA

... damage and surface color transfer. It is suitable test the upper materials, such as leather, plastics and fabric etc. Principle Under constant pressure condition, rubbing can be carried out in dry or wet circle wool felt, the machine will stop when the

Brand Name:HTI

Model Number:HTX-058

Place of Origin:Guangdong,China(mainland)

...Testing Equipment For Footwear Detailed Descriptions: This machine is used to test the water vapor permeability of shoes upper and top shoe material(including face and liner) at the specified test environment of Temp : 20°C, humidity: 65% RH. Six number of Jars or bottles with a screw top with a circular opening whose diameter is equal to the diameter of the neck of the jar that is 30±1 mm A circular

Brand Name:ZL

Model Number:ZL-2428

Place of Origin:CHINA

Automatic Adjustment Lab Vibrating sieve shaker Instrument for circular motion Application: Standard sieve is the vibration sieve unique operation principle samples for circular motion.In the screen plane slow motion at the same time, fast sample help ...

Brand Name:SANWOOD

Model Number:SM-4311C

Place of Origin:China

...Face Respirator Airtightness Tester MODEL:SM 4311C Full Face Respirator Airtightness Tester is an instrument for the full face respirator air tightness test of the respirator. Put the mask on the matching test head mold, seal the inhalation valve and wet the exhalation valve. Pneumatic vacuum pump, make the pressure in the mask reach a certain negative pressure value, stop...

Brand Name:Haida

Model Number:HD-W803

Place of Origin:Guangdong, China (Mainland)

... and other materials, but it's not applied to hard gloves. Working principle: A rotating circular blade cutting near placed in special sample device, blade move under the provision of load , automatic number, it will automatic stop when the test end,