clause 13 3 1 terminal testing equipment

Brand Name:Sinuo

Model Number:SNQC1012

Place of Origin:China

...-1:2020 clause 13.3.1 fig12, table 3, etc. It is used to process mechanical tests on terminals, for judging whether the design and the structure of the new terminals are fitted with new conductors and of the minimum and the maximum cross-sectional areas is

Brand Name:HongCe

Model Number:PST-2

Place of Origin:China

Termination Retention Tester PST-2 Product information: This tester is design and manufacturer according to standards GB2693-2011 / IEC60384-1 Clause 4.13.1, 4.13.2, 4.13.3 and GB/T 2423.60 2008 / IEC 60068-2-21 2006 Clause 3 test Ua1, clause 5 test Ub...

Brand Name:Sinuo

Model Number:SN1012

Place of Origin:China

IEC62196 Electric Vehicle Clamping Screw Terminal Tester For Plug And Connector Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 13.3.1 fig12, table 3. Equipment Overview This compliance is used for judging whether the design and the structure...

Brand Name:Pego Electronics

Model Number:PG-ADG

Place of Origin:China

Apparatus for Checking Damage to Conductors as Per IEC60884-1 clause 12.2.5 1. Introduction The apparatus for checking damage to conductors is designed to meet the test requirements of IEC60884-1:2022 clause 12.2.5 and figure 13, IEC60669-1 clause 12.2.5...

Brand Name:kingpo

Model Number:IEC 62196-1:2022 Figure 11

Place of Origin:china

IEC 62196-1:2022 Figure 11 Gauges for testing insertability of round unprepared conductors having the maximum specified cross-section Product Overview For Gauges For Testing Insertability Of Round Unprepared Conductors: The gauges conform to IEC 62196-1:...