clause 14 force test device

Brand Name:Sinuo

Model Number:SNQC1013A

Place of Origin:China

...Force Test Device Complied Standards & Clauses for Charging Interface Insertion Force Test Device IEC 62196-1:2020 clause 14.1.5, 14.1.6, fig13, fig14. IEC 62196-1:2014 clause 17.2. Technical Parameters for Charging Interface Insertion Force Test Device Test...

Brand Name:PEGO

Model Number:PG-AFD

Place of Origin:China

...) for fluorescent lamps according to IEC60598-1 clause 4.4.4. It is applied to assess the fixing device of lamhpolder should have adequate mechanical strength so as to withstand rough handling as may be expected in normal use. The test should be checked by

Brand Name:Sinuo

Model Number:SN2107

Place of Origin:China

... purpose is to prevent the device that is intended to be inserted into a fixed output socket and equipped with a pin to not subject the output socket to excessive stress. Mainly detect fixed output sockets and devices equipped with pins Standads & Clauses:

Brand Name:kingpo

Model Number:KP-1951S

Place of Origin:china

Impulse voltage test generator and monitor ,IEC 60335-1-Clause 14 Impulse test generator 1. Test pulse waveform: 1.2/ 50uS 2.The waveform error is ±20%; 3.The output pulse voltage is 0 ~ 10kV, which can be adjusted continuously； 4.The accuracy of voltage ...

Brand Name:KINGPO

Place of Origin:Mainland China

...hot dip galvanizing coatings. During the test, the free dropping hammer is used to hit the zinc coating to test whether the zinc coating confirms to the standard requirement. This item is appropriate for the manufacture factory like the iron tower and the

Brand Name:HongCe

Model Number:HC9916

Place of Origin:China

... safety and convenience. As a source manufacturer, we deeply understand the far-reaching impact of every detail on user experience and safety. The HC9916 socket pull-out force test device is like a

Place of Origin:China Load Cell

Tension and Compression Type Force Testing Devices Load Cell Load Cell Dimenison Load Cell Dimension Items UNIT TECHNICAL DATA Rated capacities(Emax) t ...

Brand Name:SHC

Model Number:SC-FS05

Place of Origin:China

...ch is made after the test of clause 21. A force of 100 N is exerted on the pin, which is supported as shown in IEC60884-1, figure 14, for 1 min in a direction perpendicular to the axis of the pin, by means of a steel rod having a diameter of 4,8 mm, the

Brand Name:HJ

Model Number:HDD8304

Place of Origin:China

...Test Equipment Integrated Test Device For Circular Saw Switch And Lower Guard Standard: IEC60745-2-5 ‘Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws’.2003 Annex BB.20.102. EN 60745-2-5: 2010 clause 17.101 and clause 19.102.3. EN 60745-2-5: 2010 Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301. Application: It is used to test...

Brand Name:JLX

Model Number:LX-9030

Place of Origin:Made in China

...Force Test 250 N According to IEC60950 clause 4.2.4 and IEC60065 clause 9.1.7, diameter 30mm, stainless steel material, it can be used with push pull meter with M6 caliber. External ENCLOSURES are subjected to a steady force of 250 N ± 10 N for a period of 5 s, applied in turn to the top, bottom and sides of the ENCLOSURE fitted to the equipment, by means of a suitable test...

Brand Name:AISRY

Model Number:ASR-1220S

Place of Origin:China

...Force Testing Machine Force Value Test Machine Appliance: Digital Universal Socket Plug 5000N Nylon Rope test connector usb test Wire Pulling pull-out Force Tester is used in various kinds of connectors for plug in and plug out force test, equip with automatic device for adjustment centre site and special grips so that it can get the precision insert force; Digital Universal Socket Plug 5000N Nylon Rope test

Brand Name:SKYLINE

Model Number:SL-PL31

Place of Origin:China

...Force Test Machine Product introduction Insertion Force Testing Machine is suitable for connectors insertion and withdrawal force tests, the use of unique device automatically matched to find the heart of a variety of special fixture connector, the plug can be completely accurate force results. All the testing informations are setting by the computer and it can automatically store testing condition,test...

Brand Name:kerang

Model Number:HT-I34

Place of Origin:CHINA

...:Home appliance fixed insulation accessible part and coated printed board. Feature:Test method: make sure the angle between the pin and the surface of the sample is 80-85°. Then use the pin which is loaded with the axial force of 10±0.5N to scratch the

Brand Name:Lonroy

Model Number:LR-Q023

Place of Origin:China

... is an advanced testing equipment used to test the plug-in and plug-out durability of component pins and mother pins. It simulates the manual insertion and extraction of test component pins and mother socket pins, accurately and effectively conducting the

Brand Name:Haida

Model Number:HD-A534

Place of Origin:China

...Testing Equipment For Clamp Force Testing​ Clamp force test machine.pdf Safety Protection Overload protection, overvoltage protection & limited position protection device The Usage: Specimen shape Parallelepiped transport package Max. Specimen weight 500kg Clamping pressure force According to the transport diagram on the test sample, the operator can add 400~3000Lb (adjustable) pressure force...

Brand Name:Infinity Machine

Model Number:IF6001A

Place of Origin:Made In China

...Force Test For Spring Key Force Tester 25kg Main Unit Weight Product Description: Servo Control Keystoke / Switch Button Force Test Machine The Servo Control Keystoke / Switch Button Force Test Machine is a highly advanced and accurate testing device designed specifically for keyboards, making it an essential tool for manufacturers, repair technicians, and quality control inspectors. With a test...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-A534

... & limited position protection device Clamping Force Testing Method Of Large Products 1. Before placing the packaged product between platens, verify that the clamp force using the clamp indicator. The indicator should be placed between the axes of

Brand Name:ZL

Model Number:ZL-2809

Place of Origin:China

...Force Testing Machine Application This machine used in various kinds of connectors for plug in and plug out force test, equip with automatic device for adjustment centre site and special grips so that it can get the precision insert force; Adopt Chinese Windows version software frames setting which is easy for operation and can storage for test data's (test...

Brand Name:JIEDONG

Model Number:JD-3011

Place of Origin:Guangdong, China

...Force Testing Machine Stroke Resolution 0.001mm Fully automatic insertion force testing machine JD-3011 Product Usage: ● This machine is suitable for plug-in and pull-out force testing of various connectors. Thanks to the original automatic center-finding device and special fixtures for various connectors, completely accurate insertion and extraction force results can be obtained. Test...

Brand Name:Kinte

Model Number:WH-8818CY

Place of Origin:Guangdong,China (Mainland)

... force and pull-out test, with the patented design of the automatic seeking heart device, will be fully accurate plug test, The main parameters: 1, the determination of the maximum load: 50,20,5,2 kg 2, the minimum decomposition: 0.01kg or 1g 3, the