clause 2 3 5 test generator

Brand Name:Sinuo

Model Number:SN1104-3

Place of Origin:China

...Testing Equipment Circuit 3 Impulse Test Generator Complied Standards & Clauses This surge test generator conforms to IEC 62368-1:2018 clause 5.4.2, 5.5.8 and Annex D, circuit 3 of Table D.1, Annex G.10, etc., IEC 60950-1:2013 clause 7.4.2, reference 3 of table N.1, IEC60065:2014 clause...

Brand Name:Sinuo

Model Number:SN1104-3

Place of Origin:China

...Clause 5.4.2, 5.5.8, Annex D Circuit 3 of Table D.1 Surge Test Generator 10KV Product Information: This surge test generator conforms to IEC 62368-1:2018 clause 5.4.2, 5.5.8 and Annex D, circuit 3 of Table D.1, Annex G.10, etc., IEC 60950-1:2013 clause 7.4.2, reference 3 of table N.1, IEC60065:2014 clause...

Brand Name:HongCe

Model Number:HJ0602

Place of Origin:China

...Clause 14 High Voltage Impulse Generator With Wave Shape 1,2/50 µs IEC60335-1 Clause 14 Transient overvoltages Appliances shall withstand the transient over-voltages to which they may be subjected. Compliance is checked by subjecting each clearance having a value less than those specified in Table 16 to an impulse voltage test. The impulse test...

Brand Name:Pego Electronics

Model Number:LSG-255

Place of Origin:China

...Generator for Impulse Dielectric Withstand Test for EVCS 1. Introduction The impulse voltage generator has a no-load wave shape corresponding to the 1.2/50ms standard impulse specified in IEC 61180 clause 7.1.2.1. The output impedance of the impluse generator is 500Ω and 2Ω, and test voltage can up to 15KV. It can meet the test requirements of IEC60664-1 clause 6.2.2.1 and IEC61851-1 clause...

Brand Name:kingpo

Model Number:Model 8280

Place of Origin:china

... 2 channels/phase 90° Pink Noise Generator Manual V2.6-G.docx Technical Specification •Pink noise or sine wave 1000 Hz (not at the same time) •Two output channels when testing •The channels can be phase shifted to 0° or 90° •Fine adjustments of

Brand Name:SKYLINE

Model Number:SL-T70I-B

Place of Origin:China

...test standard for mattress edge testing,using the pressure plate of the buttocks is used to simulate the pressure generated by the human body sitting on the edge of the mattress, and the durability of the mattress edge is tested by repeated compression for a certain number of times Technical Parameter Test load capacity 1000N Test Cycle 5000 Main time Maintain for (3+/-1)s Ref. Test Standard EN 1725 Claus

Brand Name:KINGPO

Place of Origin:China

...Generator meets the requirements from the latest standard for pink noise in IEC 60065 Clause 4.2 and 4.3. It is especially developed for all types of tone frequency amplifiers, when you need 2 channels/phase 90 ° Technical Specification  Pink Noise + Sine Wave 1000 Hz (not at the same time)  Two output channels when testing...

Place of Origin:China

Brand Name:KeRang

...Test Equipment Standard: Conforms to IEC60065:2014 clause 8.17 b), 12.1.3, IEC60950 Application: It is used in the design, research and development, and manufacturing process of automobile parts, instruments, toys, and other industries. It simulates the collision and vibration generated by the products during transportation and use, and detects the actual working conditions and structural strength of the products. Test