clause 8 test probe

Brand Name:Sinuo

Model Number:SN2210-3

Place of Origin:China

...tem-Part 1: General requirements IEC 60529 Edition 2.1 2001-02, IEC61032 test probe C and IEC60529 for IP3, IEC60065 and etc. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the

Brand Name:Sinuo

Model Number:SN2110A

Place of Origin:China

...Test Probe 20N Complied Standards & Clauses The test probe confirm to the IEC 62196-1:2022 clause 10.2, figure 9. Equipment Overview The test probe confirm to the IEC 62196-1:2022 clause 10.2, figure 9. Touching the specimen with the end of the probe and then respectively exert the force of 20N until the probe...

Brand Name:kingpo

Place of Origin:china

...used for protection test on the lamps of household appliances. Test method: Use this sphere probe with diameter 75±0.5㎜ to touch the lamp which is equipped with a lampshade with inconspicuous force. The sphere probe should not be able to touch the lamp.

Brand Name:PEGO Electronics

Model Number:PG-TPR8

Place of Origin:China

... 20.102 and GB4706 clause 20.102, it is applied to check if the blades of hand-held blenders are completely screened from above and unable to touch a flat surface while rotating. The ...

Brand Name:HongCe

Model Number:HT-I12

Place of Origin:China

...clause 9.1.1.3 Children Test Probe 18 Standard: Conforms to IEC 60065:2014 clause 9.1.1.3, IEC61032 figure 12 finger probe 18, IEC335.1,UL1017. Application: It is used to simulate the children who are older than 36 months and younger than 14 years to test whether the hazardous parts can be touched. Test...

Brand Name:HEJIN

Model Number:HT-I34

Place of Origin:CHINA

... engineered to evaluate the scratch resistance of electrical solid insulation surfaces. Fully compliant with IEC 60335-1 Clause 21 (and compatible with IEC 60950-1), this probe features a 40° cone-shaped pin head with a 0.25mm±0.02mm rounded tip — a

Brand Name:KingPo

Place of Origin:China

...Test Probe B Finger Length 100mm IEC60335 2 14 Clause 20.2 IEC60335-2-14 Clause 20.2. Test Finger B Product Details Standard description: For blenders, detachable parts, except lids, are not removed. The test is carried out with a test probe similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the test...

Model Number:TPU4

UL Rigidity Test Rod Probe Model TPU4: UL Rigidity Test Rod Probe For testing enclosure rigidity in accordance with clause 8.1 of IEC 1010 and the EN, UL and CSA versions of this Standard. Handle is Delrin, tip is stainless steel.

Brand Name:kerang

Model Number:HT-I29

Place of Origin:CHINA

...Probe HT-I29 Standard:IEC60598-2-20 clause 20.11.2. Application:It is used for testing the string lights which can not make all of the metal intertexture or other metal decorating parts charged. Test sample:String lights. Feature:It shall not be possible to touch live parts with this probe when the probe is applied in any position of the lamp which is installed with the chain with a force not exceeding 0.5 N. Parameters: Model HT-I29 Probe

Place of Origin:China

Brand Name:Julixing

Model Number:LX-2B30

...clause 20.2. Means of a test probe that is similar to test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the test finger and the stop face being 100 mm. Test probe that is similar to test probe...

Brand Name:PEAKMETER

Model Number:T3002

Place of Origin:China

...Test Probes And Pen-Typing Lead Probe Wire Features Probe Length: 120mm/Probe Tip Ø2mm Probe Plug: Ø4mm Cross Plug, Right angle type Probe Wire: 22AWG, red/black Length: 800mm Safety Class: EN61010-031, 1000V CAT Ⅱ, MAX 10A DESCRIPTION 10A ULTRA SOFT PROBE TEST Lead Length Probe...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-11

IEC61032 Rigid test probe 11, IEC60529 Rigid test probe 11 Product Description IEC61032 Rigid test probe 11, IEC60529 Rigid test probe 11 Introduction: Bonad offers a wide range of probes to meet the most common standards including those from IEC, EN, UL, ...

Brand Name:Charter Leader

Model Number:CLP-RF11GSMPM

Place of Origin:China

...test connector adapter RF coaxial test probe The Current Monitoring probes may be used whenever RF current measurements are required. Current measurements are made by placing a current carrying conductor within the “sensing” window of the probe and measuring the probe’s output voltage with an RF detector. Calibration of the probe...

Brand Name:SHC

Model Number:SC-F913

Place of Origin:China

...15 0 -0.1 4 Ф25±0.2 5 4 6 Ф10 7 20 Standard Test Probe Kit: IEC61032 Figure 2 Test Probe B standard test finger IEC61032 Figure 16 Test probe 41​ Test Thorn Probe IEC61032 Figure9 Test probe13, short pin Information: This pin is intended to verify the

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

...Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing or the internal baffle of the housing. Can be ordered with 10~50N thrust. Can be ordered with 10~75N thrust. Test Finger Usage 1. As shown in the figure, the finger portion of the thrust test

Brand Name:GE

Model Number:IC9-RS

...Probe ultrasonic testing probes repair crtstal 1. Frequency: 5.0-8.0Mhz 2. Compatible system: Voluson S10, Voluson P8 3. Application: OB/GYN & urology 4. original, in good working condition 5. With 90 days warranty Knowledge Point The IC9-RS Real-time 2D Endocavitary Probe...

Brand Name:Lonroy

Place of Origin:China

... inspection to prevent direct contact of handheld tools.It can be customized with a 3 ± 0.3N pushing force. Standards Compliant with the requirements of IEC61032 Figure 2 test fixture C,

Brand Name:YBADDVANCE

Model Number:4MM Test Probe

Place of Origin:China(mainland)

...Probe Clip Power Multimeter Piercing Probes 4MM Test Probes Extension Test Leads Description Heavy Duty Wire Piercing Probe Clip Power Multimeter Piercing Probes 4MM Test Probes Extension Test Leads Specification Product Name Heavy Duty Wire Piercing Probe Clip Power Multimeter Piercing Probes 4MM Test Probes Extension Test...

Brand Name:Kinte

Model Number:WH-8601

Place of Origin:Guangdong,China (Mainland)

GB4706.1 Standard Test Finger Pin Electrical Test Probes WH-8601 Standard test finger, pin (test probe), pin: meet the standards: GB4706.1, GB8898-97, GB2099.1-96, IEC884-1 the corresponding provisions of the requirements.