combustible materials edge ignition tester

Brand Name:LAB TECH

Model Number:SIT

Place of Origin:China

...Tester Introduction: SIT ISO11925 Small Flame Tester is designed and manufactured in accordance with DIN 53438 & ISO 11925-2 standard. SIT ISO11925 Small Flame Tester uses the German Kleinbrenner principle to determine the combustion properties of building materials under direct impact from a small vertical flame. It is applicable to building material...

Brand Name:Lonroy

Model Number:LR-A146

Place of Origin:China

... the combustion performance of floor materials. In the test combustion chamber, a small flame is ignited to ignite the floor materials placed horizontally and exposed to a 30° inclined heat radiation plate, to assess their flame propagation ability. It is

Brand Name:YUYANG

Model Number:YY158

Place of Origin:China

... heated environment. When a lot of dust is exposed in heating the air and the air temperature is high enough, it may lead to spontaneous combustion. This method can test the minimum ignition temperature of combustible dust cloud. Standard: EN 50281-2-1:

Brand Name:SKYLINE

Model Number:SL-FL081

Place of Origin:China

...impingement of vertical single-flame source in the principle of German Klein Brenner, For related categories B, C, D, e, Bfl, Cfl, Dfl and Efl in all combustible materials testing, the device provide overall solution, and is applicable to the operator, the

Brand Name:HongCe

Model Number:HWI-1

Place of Origin:China

...Ignition Tester, Annealing Time 8s-12s, Power 0.26W/mm±4% M.1 Hot wire ignition test M.1.1 Five samples of each material shall be tested. The samples shall be 1 50 mm long by 1 3 mm wide, and of uniform thickness stated by the material manufacturer. Edges...

Brand Name:AI

Model Number:DFI

Place of Origin:China Mainland

...Ignitability Tester is designed according to the BS476-12:1991. Method of test for ignitability of products by direct flame impingement.The accuracy of the Ignitability tester meets the requirements of relevant standards and meets the control requirements for the accuracy of measurement. Standards: BS 476-12:Fire tests on building materials and structures - Part 12: Method of test for ignitability...

Model Number:FGW

...ignition tester,safety test equipment Model FGW: Glow wire ignition tester,safety test equipment Glow wire ignition tester,safety test equipment is designed to test the resistance to fire of insulating parts. It assesses the susceptibility of electrical insulating materials to ignition as a result of exposure to a glowing wire.This test method determines the minimum temperature required to ignite a material...

Brand Name:HJ

Model Number:HAI-1

Place of Origin:China

...Ignition Tester Arc Ignition Speed ​​40 Times/Minute Flammability Testing Equipment Product Introduction HAI-1 High Current Arc Ignition Tester is a professional Flammability Testing Equipment created by the original manufacturer. It strictly follows international standards and provides enterprises with reliable material...

Brand Name:Haida

Model Number:HD-A513-C

Place of Origin:China

...Edge Compressive Tester ISTA Packaging Testing Machine Ring Crush and Edge Compressive Tester.pdf Product Description: Ring Crush and Edge Compressive Tester can do a full range of testing, which includes Ring Crush Testing, Flat Crush testing, Edge Compressive Testing, Adhensive Strength Testing and other general compression tests, to a variety of materials like paper, packaging materials...

Brand Name:KINGPO

Place of Origin:Mainland China

...: It is suitable for arcing resistance test of electric and electronic products, household appliances and its materials. The working principle is to simulate the electric leakage on the insulator which may cause among different polar of live parts or

Place of Origin:China

Brand Name:KeRang

... test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time. Test sample:Information technology ...

Brand Name:YUYANG

Model Number:YY1311

Place of Origin:China

... of smoke produced by solid materials and components mounted in a vertical position in an enclosed chamber. This widely used test instrument measures the specific optical density produced by a material when a substantially flat sample, up to 25 mm thick,

Brand Name:DAXIAN

Model Number:DX8341

Place of Origin:China

...Material Flame Retardancy Tester Conform to the standard: meet the requirements of GB8625 and DIN4102 "Test Methods for the Flame Retardancy of Building Materials". Scope of application: It is mainly applicable to determine whether the building materials are flammable under the specified conditions, and all materials that have passed the combustion...

Brand Name:TAKUMI

Model Number:TEX-20-037

Place of Origin:CHINA

TEX-20-037 High-Temperature Resistant Materials High Performance Automotive Ignition Coil Early gasoline (petrol) internal combustion engines used a magneto ignition system, since no battery was fitted to the vehicle; magnetos are still used in piston-...

Brand Name:GOLD

Place of Origin:China

Building materials flame retardant coating testing machine (large plate method) Introduction: The flame retardant coating testing machine (large plate method) is used to place the fire retardant coating coated on the surface of the combustible substrate...

Brand Name:HOOHA

Model Number:ZY6256

Place of Origin:Guangdong

ASTM E 84 - 06 ZY6256 Insulation Resistance Test Building Material UL723 Scope of application: The experiment was conducted to determine the flame propagation rate of building materials (and to measure the concentration of smoke). The surface combustion...

Brand Name:HOOHA

Place of Origin:China

... to characterize the product by measuring ease of ignition (time), rate of smoke generation (mass loss) and toxicity (gas analysis). These are essential parameters in the evaluation of the potential fire hazard of ...

Brand Name:HTI

Model Number:HTB-009

Place of Origin:Guangdong,China(Mainland)

...combustion characteristics of plastic materials. Flash point and auto-ignition point tester for measuring the temperature of the plastic flash fire and auto-ignition temperature, which is convenient to evaluate plastic ignition performance. This tester is

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

... of materials is crucial for ensuring the safety and integrity of structures. The Building Material Ignitability Test Machine with Single Flame Source is a cutting-edge device that offers precise and reliable testing capabilities, enabling manufacturers,