combustion plastic spot temperature testing equipment

Brand Name:DAXIAN

Model Number:DX8602

Place of Origin:China

...Plastic Spot Temperature Testing Equipment Overview: DX8602 ignition temperature tester is designed and manufactured in accordance with GB4610-2008 "Determination of Ignition Temperature of Plastic Hot Air Furnace Method" and GB/T9343-2008 "Test Method for Combustion Performance of Plastics - Determination of Flash Ignition Temperature and Spontaneous Ignition Temperature...

Brand Name:YUYANG

Model Number:YY104

Place of Origin:China

... flame and burned a certain time,to measure the minimum temperature of the material.Application comparison within material through the testing results. Standard: ASTM D 1929,GB/T 4610,GB/T 9343, ISO 871 Specification: Furnace tube inner diameter ...

Brand Name:HOOHA

Place of Origin:China

...the material.Application comparison within material through the testing results. Standard: ASTM D 1929,GB/T 4610,GB/T 9343, ISO 871 Specification: Furnace tube inner diameter 100 ± 5mm, length 240 ± 20mm, not less than 750 ℃ temperature ceramic tube;

Place of Origin:China

Brand Name:CHENGFENG

Model Number:CF8602

...Plastic Spot Temperature Tester, fully conforms to GB4610-2008 Product Description Concepts related to the test results: Flash-ignition temperature (FIT): The lowest temperature at which enough flammable gas is ignited when a flame is applied under specified test conditions. Self-ignition temperature (SIT): The lowest temperature at which it ignites by heating without any ignition source under specified test conditions. Glowing combustion

Brand Name:HTI

Model Number:HTB-016

Place of Origin:Guangdong,China(Mainland)

...Testing Equipment Plastic Ignition Temperature Test Apparatus Description: Decompose and release the combustible gas from plastic material under regulated testing conditions,ignited by outer flame and burned a certain time,to measure the minimum temperature of the material.Application comparison within material through the testing...

Brand Name:AI

Model Number:AIC-61241

Place of Origin:CHINA

...Temperature Testing Equipment Introduction Minimum Ignition Temperature Testing Equipment is a way of testing the sensitivity of the ignition that the dust cloud is in the heated environment. When a lot of dust is exposed in heating the air and the air temperature is high enough, it may lead to spontaneous combustion. This method can test the minimum ignition temperature of combustible...

Brand Name:Gaoxin

Model Number:GX-3010

Place of Origin:China

...Testing Equipment For High Temperature Aging Test For Rubber And Plastic Industry 1. Quick Details Alternative name Anti-Aging Testing Chamber for rubber Function Test aging resistance of rubber and plastic by high temperature Type Three dimension Feature Specimen can be rubber or plastic Test Anti-aging performance Weight 87kg Volume 91*55*99mm Corresponding test...

Brand Name:HOOHA

Model Number:ZY6017

Place of Origin:Guangdong

Plastic Wire Testing Equipment Horizontal Vertical Combustion Tester ZY6017 Scope of application: It is mainly used to determine the fire resistance of plastic or plastic parts by burning in the horizontal or vertical direction under the condition of 50W flame. Meet the standard: GB/T2408, GB13488, ISO1210, UL94 V- 0v-1v-2, ASTMD635, IEC707, IEC 60695-11-10 standard. Main features: Product composition: The plastic horizontal vertical combustion

Brand Name:GOLD

Place of Origin:China

...Test Apparatus NBS Plastics Smoke Density Testing Equipment Introduction: NBS Plastic Smoke Density Testing Equipment is a test equipment used to measure smoke density according to the technical conditions specified in EN 45545-2, ISO5659.2-2006 and ASTM E662 standards. This standard applies to the determination of the specific optical density of smoke produced by plastic combustion...

Brand Name:lixian

Model Number:HZ-2019

Place of Origin:China

...Temperature Test Equipment 225l, 408l, 608l Hz-2019 For Electronic, Plastic Products, Electrical Appliance High and Low Temmperature Test Equipment summary: Temperature test chamber can test the material property in high and low temperature, such as electrical, electronic products, as well as their original devices, The testing equipment...

Place of Origin:China

Brand Name:GC

Model Number:GC-WDK-3A

HDT Vicat Softening Point Temperature Testing Machine Product Description Model: GC-WDK-3A Product Introduction GC-WDK-3A thermal deformation Vicat softening point testing machine uses PLC programmable controller for temperature change and computer display...

Brand Name:Haida

Model Number:HD-E703

Place of Origin:China

... environment can tolerate continuous, that is, in the shortest time test chemical changes or physical damage due to its thermal expansion and contraction caused. Suitable objects include metal, plastic, rubber, electronics ... and other materials can be

Brand Name:HUATEC

Model Number:TG-3300

Place of Origin:Beijing

...Testing Equipment Plastic Ultrasonic thickness gauge TG-3300 with 0.75mm - 300.0mm measure range Features 1. Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. 2. Transducer models are available for special application, including for coarse grain material and high temperature...

Brand Name:SANWOOD

Model Number:SM-Series

Place of Origin:GUANGDONG,CHINA

...test equipment usage temperatue chamber High-low Temperature and humidity test chamber Introduction:Test material heat, cold, dry resistance, humidity resistance.Suitable for electronics, electrical appliances,Communications, instrumentation, vehicles, plastic...

Brand Name:GSKA

Model Number:Temperature Humidity Chamber

Place of Origin:Dongguan China

80L 150L 225L Programmable Temperature Humidity Chamber Safe And Reliable​ Chamber Summary: Easy To Operating Performance of climate temperature humidity test chamber for electronics, plastic products, electrical appliances, instruments, metals, chemicals...

Brand Name:LIYI

Model Number:LYDY-6401

Place of Origin:CHINA

... for measuring and evaluating the combustion characteristics of plastic materials. It is designed and made based on the America UL94standard the combustion characteristics’ testing of plastic materials used for device and equipment parts. It tests the

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R807

...Plastic Testing Machine , Combustion Flammability Test Equipment 1.Introduction: The combustion tester is used for burning several flame at a certain height and angle of the test specimen when the specimen is horizontal or vertical by using the required size of the Bunsen burner (Bunsen burner) and the specific gas source (methane or natural gas). the ignition of bedding under the hot combustion...

Brand Name:HongCe

Model Number:HC-2

Place of Origin:China

... and the ISO4589-1 Plastics-determination of burning behaviour by oxygen index-part1:Ambient-temperature test. Application The apparatus is suitable for the test of oxygen index combustion and the specimen which the thickness of the specimen is less

Brand Name:vouch

Model Number:5600

Place of Origin:china

...Plastic Testing Equipment Combustion Simulation Fire Hazard Test Lab Technology data: Accord with standard:IEC-60695,GB5169 Size:1120w*600d*1020h Flame height adjust:5-45mm Burning time adjust range:0-99.99s Temperature display range:0-1200degree Sustained combustion range:0~99.99s Remainder combustion range:0~99.99s Burning time Resolution rate:0.01s Remainder time resolution rate:0.01s Flame temperature...