condenser finned pipe

Brand Name:Reliance

Model Number:DR

Place of Origin:China.Imported materials are available.

...Condenser Fin Stock​ ASTM B111/ B111M : Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock Quick Detail: General extrusion production capacity General specifications of DR Type-Extruded Fin Tubes Extrusion Facility: 10 finning machines. Daily capacity up to 3000 meters. Extruded fins type: solid and serrated. Tube OD: 50.8mm(2'') max. Tube Length: 18 meters max. Fin

Brand Name:sail

Place of Origin:China

..., aluminum, galvanized plate. 2. Copper pipe: diameterΦ7, Φ7.94, Φ9.52, inner grooved or smooth tube. 3. Aluminum foil: hydrophilic or bare 4. Fin type: louver fin, flat fin, corrugated fin 5. Pitch of fins: Ø7 1.1~1.8mm Ø7.94 1.4~2.0 mm Ø9.52...

Brand Name:YUHONG

Model Number:Embedded G type fin tube

Place of Origin:CHINA

... Heat Transfer Efficiency: Due to its low carbon content, A179 tubes have excellent thermal conductivity, making them ideal for heat exchangers, condensers, and similar applications. Corrosion Resistance: While not as corrosion-resistant as

Brand Name:WONDERY

Model Number:CYJ-120*1D-500

Place of Origin:Jiangsu, China (Mainland)

... builder 3) Nitrogen gas shield continuous brazing oven 4) Radiator tank clinching machine 5) Radiator leak tester This aluminum fin making machine is special designed for forming aluminum foil coil into wave type fin continuously for heat exchanger,

Brand Name:Sunhope

Place of Origin:Guangdong,China

... builder 3) Nitrogen gas shield continuous brazing oven 4) Radiator tank clinching machine 5) Radiator leak tester This aluminum fin making machine is special designed for forming aluminum foil coil into wave type fin continuously for

Brand Name:YUHONG GROUP

Place of Origin:CHINA

...desulfurization, waste gas treatment. Refrigeration and Air Conditioning: Condensers, evaporators, cooling towers. Food and Pharmaceutical: Sterilization, drying, and heat exchange equipment. Marine and Offshore: Ship engine cooling, ...

Brand Name:Yun Neng

Model Number:6815

Place of Origin:Changzhou, China

...fin material 6815 fin width 42.5 mm for micro-channel condenser Speed water -type vertical wing tablets are a special vertical wing tablet. It is characterized by a certain tilt angle at the end of the wing tablet, so that condensation water can quickly flow down from the wing tablet, avoiding condensate water on the wing tablet, which affects the change. Thermal efficiency. Fast -rowed vertical fins...

Brand Name:HZFT

Model Number:M-11035.185100-01

Place of Origin:China

...Condenser Finned Tube Coil 25.5MM Outer Dia​ Quick Details: 1. Tube based on roll forming process 2. High thermal conductivity and compact design 3. Save cost and assembling space due to higher efficiency 4. ISO 9001:2008 quality certified 5. Well sold in USA, Australia, Germany, etc. Tube Number Code System Take Tube Number M-11045.180100.00 as example M 11 045 180 100 00 M=Medium Height H=High L=Low Minimum fins...

Brand Name:Dingang-Aluminum Foil

Model Number:8011

Place of Origin:China

...condenser fin production. The 8011 alloy delivers excellent ductility, while the O (full soft) temper maximizes formability—allowing easy stamping into the thin, intricate fin structures critical for condenser heat exchange. Its hydrophilic coating is a key advantage: it promotes rapid water condensation and drainage on fin...

Brand Name:Ecool

Model Number:EHX11

Place of Origin:China

... Condenser / Fin And Tube Heat Exchanger for Waste Gas Treatment 1.Product Description Finned tube heat exchanger is a kind of heat exchange equipment most widely used in gas and liquid. To achieve the purpose of strengthening heat transfer, the fins wit...

Brand Name:GREEFOUN

Model Number:QXC18D5

Place of Origin:CHINA

...Condenser 1, Introduction: (1) The product is applicable to water chiller units, water source heat pump units etc. (2) Suitable refrigerants are R22, R134a, R407C, R404a, R410A etc. (3) Apply load cold agent for tap water, underground water, river water and sea water or brine, water and glycol solution, sulfate solution, etc. (4) For heat exchange tube, copper pipe...

Brand Name:HD BOILER

Model Number:Spiral Fin Tube

Place of Origin:ZhangJiagang , Jiangsu , China

... Fin tube,L/LH Type Fin Tube,H Type Fin tube with Material A179/Alu1060,stainless steel,copper,copper nickel Technical parameters The high degree of fin 0-16mm(or outside diameter of fin φ25-φ75); Pitch of fins 2.0-5.0mm; Length of finning tube 0.5~ 14m.

Brand Name:YUHONG

Model Number:A312 TP304, TP304H,TP304L

Place of Origin:China

A312 TP304, TP304H,TP304L Serrated Fin Pipe SS304H Fins for Fired Heater Convection Section YUHONG TP304H Serrated Fin Pipe with SS304H fins is a highly efficient heat transfer solution designed specifically for fired heater convection sections. Engineered...

Brand Name:SAT-CHAM

Model Number:Boiler fin tube

Place of Origin:China

... example, that for fins of equal volume, rectangular fins provide greater rates of heat transfer than pin fins due to their increased surface area. What is the purpose of the fins on finned tube coils? The fins on a coil accomplish two major functions:

Brand Name:TORICH

Model Number:SA192

Place of Origin:Zhejiang China

...Fins Pipe Round Boiler Finned Tube Profile Finned Tube Material: SAE1010 , SAE1020 , SAE1035 , SAE1045 , ST37.0 , ST44 , ST52 , E235 , E355 Carbon Steel and Alloy Steel grade, upon customers request. Profile Finned Tube Size: OD:5-420 mm, W.T.:0.5-50 mm, Length: up to 12 m, or according to customer's requirement. ( Diameter and wall thickness could be at customer's request.) Profile Finned

Brand Name:Kailaili

Model Number:FNH-220

Place of Origin:Shengzhou, Zhejiang, China

... cooled condenser 1. MOQ:1PCS 2. Payment: 30%TT in advance,70% see the B/L copy 3: Delivery time: within one month after receive the payment. 4. Port of loading: ...

Brand Name:HengXiang

Model Number:CT-351

Place of Origin:CHINA

... with 6' combs works on any vendor grill. Using this tool allows the radiator or air conditioning grill to work correctly. Compatibility Universal The fin straightener tool has six sided

Brand Name:OEM/ODM

Model Number:Customized

Place of Origin:CHINA

...Fin Type Heat Exchanger , Finned Pipe Heat Exchanger Online Support Specification Tube Size Fin (OD) Fin Height Fin Thickness Fins Distance Φ18x2 mm Φ38 mm 10 mm 0.3 mm 4-5 mm Φ21x2 mm Φ45 mm 12 mm 0.3 mm 5-8 mm Φ21x2 mm Φ51 mm 15 mm 0.3 mm 5-8 mm Φ25x2 mm Φ50 mm 12.5 mm 0.3 mm 5-8 mm Φ25x2 mm Φ55 mm 15 mm 0.3 mm 5-8 mm Other finned...

Brand Name:NOONDAY

Model Number:AA4343/ AA3003

Place of Origin:China

...Condenser Fin Product Features 1 Excellent brazing performance,very less cold solder joint or sealed off cauesd by material quality. 2 Good corrosion resistance . 3 Good sagging resistance. 4 Flat plate with good shape. Aluminum strip/plate for composite condenser fins...