conductivity cell sensor with wire

Brand Name:YOKOGAWA

Model Number:SC42-SP34

Place of Origin:Netherlands

...: Contacting and Inductive (Toroidal, Electrodeless). When Contacting Sensors are used, the conductivity is measured by applying an alternating electrical current to the sensor electrodes (that together make up the cell constant) immersed in a solution and

Brand Name:Daruifuno

Model Number:ASCK01

Place of Origin:China

Conductivity Sensor 2 Electrode Conductivity Cell For Ultra Pure Water Measurement The conductivity sensor is a 2 electrode conductivity cell electrode with the K value of 0.1. It can carry out the measurement from 0.1μS/cm to 200μS/cm. The ASCK01 conductivity sensor can be used for ultra-pure water, pure water and other water treatment applications. The temperature change has a great influence on the conductance...

Place of Origin:Dongguan,Guangdong,China

Brand Name:UCHI

Model Number:LXD11528

...Conductive Cell 11mm For Light Control , Light Sensor Photocell Quick Details 1)Coated with epoxy 2)Good reliability 3)Small volume High sensitivity 4)Fast response 5)Good spectrum characteristic Description CdS Photoconductive Cells is a resistor which made of semi-conductor material,and the conductance change with luminance variationg.The CdS Photoconductive cells...

Brand Name:RUIJIA

Model Number:RJ-0101

Place of Origin:CHINA

Weighing Load Cell Sensor 5kg with connecting Wires his straight bar load cell (sometimes called a strain gauge) can translate up to 5kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes...

Brand Name:JUGE

Model Number:AG3953

Place of Origin:Nanjing, China

...Conductivity TDS Sensor >>Technical Parameter‌‌ ‌Conductivity Range‌: 0.01~20 μS/cm ‌Resistivity Range‌: 0.01~18.2 MΩ·cm ‌Electrode Mode‌: 2-pole ‌Electrode Constant‌: K ≈ 0.01 ‌Junction Material‌: 316L ‌Temperature‌: 0℃~80℃ ‌Pressure Resistance‌: 0~0.6 MPa ‌Temperature Sensor‌: NTC10K/NTC2.2K/PT100/PT1000 ‌Installation Interface‌: Clamp-type, compatible with dedicated flow cell...

Model Number:SC134

Place of Origin:Guangdong, China

Brand Name:SNC

SC134 small thin flat load cell 10kg 30kg 50kg mini load cell micro weight sensor 3 wire load cell 50 kg Product Description Features: Model: SC134 Capacity: 10kg-50kg Type: Full / half bridge load cell Material: Alloy steel with IP66 waterproof ...

Brand Name:Forsentek

Model Number:FAHK

Place of Origin:China

... to traditional external signal amplifier,load cell with amplifier inside the sensor has many advantages such as: Easier wiring, compact size and lower cost.The rectangular shape and low profile design of the amplifier board makes it compatible with most

Brand Name:DLX

Model Number:Resistance Wire

Place of Origin:China

CuNi 70/30 resistance wire is one of the most reliable copper-nickel alloys used across precision measurement and electrical systems. With a balance of copper (70%) and nickel (30%), it delivers stable conductivity, excellent corrosion resistance, and ...

Brand Name:Haida

Model Number:HD-B611

Place of Origin:China

... Sensor Tensile Apparatus is applicable to testing tensile stress, compressive stress, shearing force, peeling force, and elongation of materials, components, and finished product for metal, plastic, rubber, textile, synthetic chemicals, wire and cable,

Brand Name:LIYI

Model Number:LY-1065

Place of Origin:Dongguan Province, China.

Compute Control Ultimate Tensile Testing Machines With Celtron Load Cell Sensor Product Description This series of Tensile Tester is widely used in wires & cables, hardware, metal, rubber, footwear, leather, apparel, fabric, tape paper products, pharmacy...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-B604-S

Computer Control Universal Tensile Testing Machines With Celtron Load Cell Sensor Product Description: This series of Tensile Tester is widely used in wires & cables, hardware, metal, rubber, footwear, leather, apparel, fabric, tape paper products, ...

Brand Name:WHCD

Model Number:CDYG303020300

Place of Origin:Hubei, China

Power Generator Parts Engine Oil Pressure Sensor Sender 0 ~ 150 PSI Technical Data Operating voltage 6~24V Conducting power < 5W Operating temperature -25 ~120℃ (120℃ MAX 1H) Measuring range 0~5 Bar or 0~10 Bar Alarm 0.8 Bar or 1.4 Bar Output signal 10~184...

Brand Name:XIXITRONICS

Model Number:MF5A-5 Series

Place of Origin:China

Telfon Insulated Epoxy Coated Thermistors Car Seat Heating Sensor MF5A-5 Series Features: ■ Low cost , Small size ■ Proven long term Stability and Reliability ■ High Sensitivity and Fast thermal response ■ High accuracy and Interchangeability, Thermally ...

Brand Name:OEM

Model Number:JBST-4-Kit

Place of Origin:China Mainland

Features: 500kg, 1000kg, 2000kg, 3000kg, 5000kg, 10000kg 4 load cells Weighing Sensors Indicator Scale Kit IP65 protection Applicable cable diameter:Φ3.5~Φ6.5mm Widely used for platform scales,vessel weighing system,tank weighing,etc..

Brand Name:OEM

Model Number:JBST-4-Kit

Place of Origin:China Mainland

Features: 500kg, 1000kg, 2000kg, 3000kg, 5000kg, 10000kg 4 load cells Weighing Sensors Indicator Scale Kit IP65 protection Applicable cable diameter:Φ3.5~Φ6.5mm Widely used for platform scales,vessel weighing system,tank weighing,etc..

Brand Name:OEM

Model Number:YZC-Load Cell

Place of Origin:China Mainland

Features & Applications: Tension and compression load cell with metal foil strain gauge technology and over load protection, made of stainless steel Mainly used for pull and push dynamometer, hopper scale and industrial measuring systems. Capacity : 5N, ...

Brand Name:Yokogawa

Model Number:SC8SG

..., the SC202G and SC202S two-wire conductivity/resistivity transmitters, and the SC100 panel mount conductivity converter. Yokogawa also provides many kinds of sensors for accurately measuring liquid conductivity when using converters/transmitters. The

Brand Name:E+H

Model Number:CLS15D-A1A1

Place of Origin:CHINA

... conductivity sensors Measuring range k=0,01: 0.04 to 20 µS/cm k=0,1: 0.10 to 200 µS/cm Measuring principle Conductive conductivity cell with polished stainless steel electrodes Design 2-electrode conductivity cell with coaxially arranged ...

Brand Name:SUMT, ANT

Model Number:RH-EC-5T

Place of Origin:NINGBO CITY CHINA

... is a low cost load cell specially designed to measure the tension force on hoisting or crane wire rope. Easy installation does not require the hoist to be dismantled nor modified, and RH-EC rope load sensor covers a large range of rope from 8 to 21 mm in

Brand Name:MAXTEC

Model Number:MAX250A

Place of Origin:USA

... has a wide range of applications in the medical field, especially respiratory equipment and anesthesia equipment. In addition, the electrical interface of the sensor is a three-wire connector, and the sampling interface is a threaded shape, which is very