connectors cable torque test apparatus

Brand Name:PEGO

Model Number:PG-FT01

Place of Origin:China

... to IEC62196-1 clause 26.4 figure 20 and table 14, it is applied to do mechanical load flexing test of the non-rewirable accessories of ev plug and vehicle connector. Test method: The sample is fixed to the oscillating member of the apparatus so that at

Brand Name:Sinuo

Model Number:SNQC1007

Place of Origin:China

...​: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and

Brand Name:kingpo

Model Number:KP-CG97

Place of Origin:china

...​: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and

Brand Name:Sinuo

Model Number:SN1007

Place of Origin:China

... clause 23.3, etc. Equipment Overview This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. Pull is realized by single-phase speed-regulating motor to

Brand Name:ZL

Model Number:ZL-3425

Place of Origin:China

...: 16.5, IEC60598: 5.2.11 and other standard provisions. It is used to evaluate power cords, and it is intended to be permanently connected with flexible cords. Perform two tests of tension and torque at the terminals to power cables such as

Brand Name:HongCe

Model Number:CR-1

Place of Origin:China

...Cable Retention Testing Apparatus Wire Crimping Test Device Product details: The cable retention test device is designed and manufactured according to the standard requirement of IEC60884 figure 20. It is used to test cord retention and check the effectiveness of the retention of the cable and cord anchorage. Test method: The cord anchorage is used in the normal way, clamping screws, if any, being tightened with a torque...

Brand Name:HJ

Model Number:HC9919/HC9920

Place of Origin:China

... 21； IEC 60320-1 ‘Appliance couplers for household and similar general purposes –Part 1: General requirements’ clause 22.3 and figure 7. Application: Connectors/plug connectors shall be so designed that the cord cannot be

Brand Name:DAXIAN

Model Number:UL 1685

Place of Origin:China

...Cable Burning Test Device Instrument Introduction: The UL 1685 Wire and Cable Flame Test Apparatus is an instrument used to evaluate the ability of a single or bundled cable to inhibit flame propagation under specified conditions, and meets the test requirements of UL 1685, IEEE 383 and IEEE 1202. The flame suppression performance of the cable...

Brand Name:KINGPO

Place of Origin:China

IEC60065 Figure 11 Socket outlet Torque Test Apparatus Product information: This equipment is according to the requirement standard of IEC60065 Figure 11 and IEC60950.1 clause 4.3.6 to manufacture. A device provided with pins intended to be introduced int...

Brand Name:JLX

Model Number:LX-L1Y

Place of Origin:Made in China

... measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC 60065 clause15.4.1 and figure 11, IEC 60335-1 clause 22.3, IEC 60884-1 clause 14.23.2. The balancing arm of the test apparatus pivots...

Place of Origin:China

Brand Name:KeRang

...Cable Torque Tester FCT-1 Product details: This tester conforms to IEC60884-1 clause 23.2.After testing cord retention. the flexible cable is subjected for 1 min to a torque as specified in the following table: Torque test values for cord anchorages Rating of plug or portable socket-outlet Flexible cable...

Brand Name:Infinity Machine

Model Number:T6330

Place of Origin:Made in China

...Testing Apparatus for Open-and-closed Notebook Hinge Torsion Test Apparatus for Lab Testing Machine Purpose: Laptop hinge torsion test equipment is suitable for laptop, ultrabook, monitor and the other electronic products to do the torque test, and the torsion damping life-span test for the hinge, it can measure the torque...

Brand Name:SHC

Model Number:SC-NJ01

Place of Origin:China

...Torque Balance Test Apparatus Application: - Plug and Socket Torque Tester/Device is for compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus. - Plug Torque Tester/Equipment is a device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. The balancing arm of the test apparatus...

Brand Name:vouch

Model Number:5920

Place of Origin:China

...Cable Smoke Density Test Apparatus , NBS Chamber Fire Propagation Test Laboratory Testing Suzhou Yangyi Vouch Testing Technology Co.,ltd is a professional company which specialized in various flame retardance test equipment, we focus on research&development,produce,marketing and products test service for third-party ,now we have 3000 square meters standard factory and 1500 square meters test...

Brand Name:Delta

Model Number:3MC

Place of Origin:China

...placed horizontally under the definite fire condition. 3MC Cable Burning Smoke Density Test Apparatus comprises a cubic enclosure and a photo-metric system(the outer test chamber is not supplied by us, customers should build the room by themselves.) The

Brand Name:GOLD

Model Number:GD-MT 386

Place of Origin:China

...mining cables is designed and manufactured according to the corresponding requirements of the MT818-2009 coal industry standard. It is suitable for flame retardant tests of flame retardant cables and flame retardant cable joints for coal mines. When the

Brand Name:AISRY

Model Number:ASR-5619

Place of Origin:China

... as the highest price on the market plug power testing machine, without digital display, with the band Set the counting function, to the number of downtime, elegant structure. Technical parameters: Supply voltage: ...

Brand Name:SKYLINE

Place of Origin:China

... of the plug-in device with plug-in pin on the socket during normal use is within the specified range. Compliance: It is suitable for testing the torque exerted on the output socket by the device which is to be inserted into the fixed output socket and is

Brand Name:AI

Model Number:CTA

Place of Origin:CHINA

... that released during combustion from cable or optical cable components material; The equipment is designed and produced on the basis IEC 60754. The cable material is processed by prius tube furnace, and then the pH value and conductivity of the gas that