coupler lateral pulling test apparatus

Brand Name:Sinuo

Model Number:SN2104

Place of Origin:China

...Coupler Lateral Pulling Test Apparatus To Pull Test For Testing Ratings Over 0.2 A Equipment overview: Th coupler lateral pulling test apparatus is manfactured according to the IEC60320-1 clause 23.3 and figure 19. It is used to test the connector being pulled out of the appliance socket under lateral stress, so as to assess the mechanical strength of the coupler. Test...

Brand Name:Pego Electronics

Model Number:PG-LTP

Place of Origin:China

...o verify if the contact of connectors and appliance outlets have sufficient mechanical strength. A lateral pull force in parallel with the engagement face, is applied to the cable of the connector / plug connector in four directions in step of 90°±5°, a

Brand Name:kingpo

Place of Origin:china

Coupler Lateral Pulling Testing Apparatus Product Information: This device is according to the IEC60320-1, figure 19 standard requirement to design. It is used for the testing of withdrawing appliance inlet under the conditions of the connector with force, for this reason to test the mechanical strength of the connector. Technical Parameters: 1, Flexible cable bending height: 40±2 mm, adjustable. 2, Pull range: 0-100N. 3, Pull...

Place of Origin:China

Brand Name:HongCe

Model Number:CF-2

Coupler Lateral Pulling Testing Apparatus Product Information: This device is according to the IEC60320-1, figure 19 standard requirement to design. It is used for the testing of withdrawing appliance inlet under the conditions of the connector with force, for this reason to test the mechanical strength of the connector. Technical Parameters: 1, Flexible cable bending height: 40±2 mm, adjustable. 2, Pull range: 0-100N. 3, Pull...

Brand Name:AISRY

Model Number:ASR-5620

Place of Origin:China

...Zipper Reciprocating Fatigue Testing Machine Life Testing Apparatus Application : This machine applies to test the reciprocating pulling strength of zipper in vertical and lateral tension, when doing testing, the machine is pulling the zip slider by ...

Brand Name:Sinuo

Model Number:SNQC1007B

Place of Origin:China

...Figure 111 and Table 114. Product overview The Cable Anchorage Pull Force and Torque Test Apparatus (Model SNQC1007B) is a professional testing solution designed in strict accordance with IEC 61851-23:2023 clause 11.6.102. It is specifically developed for

Brand Name:HOOHA

Model Number:ZY6119

Place of Origin:China

...Test Apparatus , ZY6119 Combustion Testing Equipment Scope of application: Wool or wool fabric used in the detection of combustibility, flame spread rapidly in the surface of fabric, but the base cloth fabric structure is not burning, its mobile butane burner lateral...

Brand Name:SKYLINE

Place of Origin:China

IS 16805: 2018 Nail Penetration Test Apparatus Nail Penetration Test Apparatus Description: The test should be carried out under the ambient temperature coupler with a thermocouple battery (the contact of thermoelectric is fixed on the large surface of ...

Brand Name:KeRang

Model Number:KR-DYX-TL-01

Place of Origin:China

... abrupt pull test of Plug of plug power line,torsion test, load test and grounding current test. Test sample:Plug power line. Feature:Using automatic mode test, it will automatic shutdown when reach to the setting number if test times or setting time.

Brand Name:GOLD

Model Number:GD-BS476-7

Place of Origin:China

BS 476 Part 7 Flammability Testing Equipment / Surface Flame Spread Test Apparatus Introduction: BS 476 Part 7 specifies a method of test for measuring the lateral spread of flame along the surface of the specimen of a product oriented in the vertical ...

Brand Name:Btutest

Model Number:BT-1T BT-3T BT-5T

Place of Origin:Made in China

Pull Out Test Apparatus Portable Concrete Testing Equipment Features: 1.3KG oil cylinder and manual pump below 3kg. 2. LCD lighting function; 2200 data records; 10 ...

Brand Name:DAXIAN

Model Number:DX8299

Place of Origin:China

BS476-7 Surface Flame Spread Test Apparatus BS476-7 Product introduction: The flame spread tester is developed and produced according to the BS476-7 standard, and is used to measure the lateral flame spread performance of building products. The speed of ...

Brand Name:HJ

Model Number:HC9919/HC9920

Place of Origin:China

...’ clause 23.4 and figure 21； IEC 60320-1 ‘Appliance couplers for household and similar general purposes –Part 1: General requirements’ clause 22.3 and figure 7. Application: Connectors/plug connectors shall be so designed that the ...

Brand Name:Delta

Model Number:BS476-6

Place of Origin:China

... performance evaluation of the walls and ceilings, measurement results are expressed as an index of flame propagation. During the test, the specimen is exposed to the tubular torch, heat release of the lamp is 530J / S. 2 minutes and 45 seconds later, the

Brand Name:YUYANG

Model Number:YYF027

Place of Origin:China

NBS Plastic Smoke Density Tester Description The smoke density box is designed and developed according to lSO5659 related standards. Used in conjunction with a conical radiation furnace the heat flux in the box can be as high as 50 kw / m2, and the sample...

Brand Name:SAMYON

Model Number:YYW-2

Place of Origin:CN

...Test Instrument Application: The Apparatus is used to determine the axial pressure of the soft clay with greater saturation under the condition that the lateral direction is not restricted until the force value when the specimen is damaged, and to obtain the unconfined compressive strength of the soil. At the same time, the unconfined compressive strength test...

Brand Name:SADT

Model Number:HT-225D

Place of Origin:Beijing

HT-225D Integrated Rebound Hammer OLED Display with Software to PC Introduction HT225D Digital Rebound Apparatus has the following characteristics: integrated design, small in size; adopt non-contact optical coupler sense to realize data collection...

Brand Name:JLX

Model Number:LX-LG36

Place of Origin:Made in China

IEC 60884-1 Figure 13 Device for Checking the Resistance to Lateral Strain Lateral Strain Test Apparatus Product details: The appliance conforms to the standard of IEC60884-1 clause 13.14 figure 13. It is suitable for checking socket which rated current...

Brand Name:SHC

Model Number:SC-BC02

Place of Origin:China

... pulled out from the socket assembly. Whether the minimum force required is within the range specified by the standard. Parameter: 1. Standard one-pole 10A, three-pole 10A and 16A test standard plugs each, 10A 16A test standard plugs each, adjustable: 1)