custom steel francis turbine generator

Brand Name:Dongsen-DSSD

Model Number:Francis HL-WJ

Place of Origin:Deyang,China

...Steel Francis Turbine Generator with Automatic Control Mode for 50Hz/60Hz Frequency Features: Product Name: Francis Turbine Generator Rated Power: 300KW-20MW Installation Mode: Vertical Or Horizontal Control Mode: Automatic Application: Power Plant Rated Frequency: 50Hz/ 60HZ Francis Water Turbine Generator Francis Hydraulic Turbine Generator Francis Hydro Turbine Generator...

Brand Name:Forster

Model Number:HL240-WJ-50

Place of Origin:Sichuan, China (Mainland)

...Customize 630Kw Francis Water Turbine Generator For Hydro Power Plant Our main products included: 1. Kaplan turbine generators series. 2. Turgo turbine generators series. 3. Tubular turbine generators series. 4. Francis turbine generators series. 5. Pelton turbine generators series. Product features : The Francis turbine is compact and efficient, and can adapt to a wide range of water heads. It is one of the most widely used turbine

Brand Name:Dongsen-DSSD

Model Number:Francis HL-WJ-60

Place of Origin:Deyang,China

Brand Name:Wawushan

Model Number:SF-007

Place of Origin:China

... Generator For Micro Hydro Power Plant overview We can supply hydraulic turbines system , hydro turbine system such as kaplan turbine, propeller turbine, francis turbine and pelton turbine, turgo turbine and so on, also with speed governor, generator, ...

Place of Origin:Zhejiang, China

Brand Name:Hydrotu

Model Number:Francis turbine runner

...Steel Hydro Francis Turbine Runner for Capacity 0.1MW - 20MW Francis Water Turbine Applications: Francis turbines are the most common water turbine in use today. They operate in a water head range of 10 to 300 meters and are primarily used for electrical power production. The power output generally ranges from 100KW to 750MW. Normally, Medium size and larger Francis turbines are most often arranged with a vertical shaft, Small francis

Place of Origin:CHINA

Brand Name:Dongfeng Electric

Complex Design High Head Rotational Speed Francis Hydro Turbine what is Francis Hydro Turbine ? The water flow of the Francis turbine flows into the runner from the horizontal direction around the turbine to the center (radially enters), and then turns to ...

Brand Name:JZ

Model Number:JZ-SF-003

Place of Origin:FOSHAN , CHINA

... +/-0.005mm Material Stainless Steel : #45 Aluminum We handle many other type of materials. Please contact us if your required material is not listed above. Inspecation Equipment Coordinate measuring machining/ Caliper/ ...

Brand Name:ZTIC

Model Number:Power Generation Equipment

Place of Origin:Henan，China

...Generation Equipment Hydro Turbine Generator 150kw Francis Turbine Generator Unit 1. About us Luoyang Zhongtai Industries CO.,LTD is focused on design and manufacturing hydro turbines. The company was founded in 2014. Luoyang Zhongtai strictly abides by IEC international standards and national standards. And has CE, ISO,TUV,SGS certificates. In the management system, we still adhere to the rigorous work style formed in the turbine...

Brand Name:HUIXUAN

Model Number:thrust disc

Place of Origin:JiangSu

...generating power equipment carbon steel forged turbine generator thrust disc Quick Detail: Main material: carbon steel, alloy steel, etc Rough machined or finish machined Mainly applied in manufacturing hydro-electric power generating power equipment Description: The turbine generator thrust disc is mainly used in hydro-electric power generating...

Brand Name:GREEF

Model Number:AH-5KW

Place of Origin:CHINA

...Turbine Generator Kit Vertical Axis Wind Turbine Blades Technical specification Model AH-5KW Rotor diameter(m) 5.6 Blade material & Qty. FRP*3 Rated power(kW) 5 Rated wind speed(m/s) 11 Rated rotating speed(r/min) 240 Generator type 3-phase PMG Working wind speed(m/s) 3-30 Start-up wind speed(m/s) 2.5 Survival wind speed(m/s) 60 Rated voltage(VDC) 400/240/custom...

Brand Name:HDB

Model Number:HRSG Heat Recovery Steam Generator

Place of Origin:CHINA

...Customized Heat Recovery Steam Generator for Power Plant with ASME Standard ☺Product Introduction HRSG are a type of Waste Heat Recovery unit which uses waste heat (generally from Gas Turbines) to generate steam. Therefore, HRSGs are generally attached to the exhaust of Gas Turbines. They are commonly used in Combined Cycle Power Plants where both Gas and Steam turbines are used to drive generators...

Brand Name:LJ

Model Number:LJ-MS

Place of Origin:Luohe China

...Turbine Generator Foundation Steel Threaded Rod M36 M39 M42 M45 M48 Anchor Bolts Ring Plate Upper Ring And Lower Ri Wind Generators High Strength Steel Anchor Rod Model Number: M16 to M56 Grade: 8.8/10.9 Steel Material: 42CrMo Application: Wind Power Generation Diameter: M16 to M56 length: 2M TO 12M Description: Wind turbine anchor bolt raw material is 42CrMoA and other equivalent materials. It is purchased from large and qualified steel

Brand Name:ENNENG

Model Number:PMG

Place of Origin:China

...Turbine Generator Product Drawing Technical Parameter Rare earth Nd-Fe-B permanent magnets Low Speed Direct Drive ,no use gear-box SKF bearing Power factor close to 1 Maintenance free , can be used in all environments . Long life time >20years, could run at high speed 24 hours 365 days. Customized...

Place of Origin:Jiangsu

Brand Name:Golden

Model Number:Customized

... from china Forging/forged with CNC Machining For High Water Head Hydropower Project How it works: A Pelton Water turbine is widely used in hydropower station with the heads from 80-1600m. The Pelton wheel (Runner) is like a circular disk mounted on the

Brand Name:DM

Model Number:VT-70XX

Place of Origin:CHINA

Alloy steel 4140 4130 forged shaft axeltapp final machined for turbine generator Turbine machinery, such as gas turbine, steam turbine, water turbine need to use good performance, can cope with the high intensity of the environment, with good physical and ...

Brand Name:VISION

Model Number:Permanent

Place of Origin:People's republic of China

... Motor Permanent Magnet for Wind Turbines Generator Product Description Product name N45H Neodymium Motor Permanent Magnet for Wind Turbines Generator Shape Arc shaped (Sintered NdFeB magnets shape can customized) Material NdFeB (Neodymium Iron Boron...

Place of Origin:Jiyuan, China (Mainland)

Brand Name:KY

Customized Steel forged Rings for Heavy Truck / Steam Turbine , GB / JB Standard Specifications Custom GB, JB, YB, ASTM Standard Rolled Ring Forgings for Heavy Truck, Steam Turbine Specifications: Material carbon, alloy steel Size Outside Diameter:300-1200...

Brand Name:HICORPWELL

Model Number:1000W 48V Wind Turbine

Place of Origin:China

... Fluid Dynamics and Maglev Technology. VAWT is made of light-weight aluminum, titanium and other light special materials, mainly connected by stainless steel fasteners.

Brand Name:NUOYINGJIAYE

Model Number:NYWL-L

Place of Origin:Xi'an, Shaanxi，China

High Accuracy Good Repeatability Liquid NYWL-L Turbine Flowmeter NYWL-L Turbine Flowmeter Working Principle NYWL-L series turbine flowmeter is absorbed the advanced technology of flow meters at home and abroad after optimization design, with simple ...