dwc 2x2 fiber optic coupler

Brand Name:Geehe Comm

Model Number:GH-FO-1×2

Place of Origin:Wuhan China

...DWC Fiber Optic Coupler 2 ×2 WIth LC Connector Optic Coupler Brief Introduces: Single-Mode Wideband Couplers have 80nm bandwidth, compared to 40nm of standard fiber optic couplers. This product has a very low excess loss, high-temperature stability, high precision, and smaller sizes. The coupling ratio can be specified. Couplers...

Brand Name:ANC

Model Number:2x2 Coupler

Place of Origin:China

2x2 Fiber Optic Coupler SM Dual Window 1310 / 1550nm 1m with FC/APC Connector Description 2x2 Fiber Optic Coupler manufactured by ANC International Co., Limited is mainly used to distribute light from a main fiber into two or more fibers. Fused Biconical Taper (FBT) Splitter is made by wrapping two fiber cores together, putting tension on the optical fibers, and then heating the junction until the two fibers...

Brand Name:UNIFIBER

Model Number:Single Mode 1310nm And 1550nm Dual Window Fiber Optic Coupler (DWC)

Place of Origin:CHINA

...Fiber Optic Coupler (DWC) 1x2 Single Mode 1310nm and 1550nm Dual window coupler (DWC) is built by asymmetric coupling technique. The operating bandwidth of this normal coupler is expanding to ±40nm, and the ultra broadband coupler is expanding to ±80nm. The DWC coupler...

Brand Name:GaPho

Model Number:Fiber Optical Coupler

Place of Origin:China

... stability. Accurate coupling ratio from 50/50 to 1/99, fiber type 250um bare fiber, 3mm and 900um loose tube fiber are available with very tight uniformity in a wide wavelength range of both 1310 nm and 1550 nm windows. Singlemode dual window coupler find

Brand Name:OPTFOCUS

Model Number:OFS-PBT-SSWS1*2

Place of Origin:Guangdong, China(Mainland)

... uniformity Applications: Local Area Networks CATV distribution Fiber optic sensors DWDM systems Trunk/loop branching Specification Ordering Information 1. Configuration12=1x2, 22=2x2, 18=1x8, 1616=16x16, 132=1x32, etc. 2. Wavelength3=1310nm & 1550nm 3.

Brand Name:YT

Model Number:ST/PC-SC/PC SM 3M

Place of Origin:china shenzhen

... a whole series of 1xN and 2xN splitters that are tailored for specific applications: 1, a.1x2, 1x4, 1x8, 1x16,1x32, 1x64, 2x2, 2x4, 2x8, 2x16, 2x32, 2x64 Versions of splitters are available. 2, The length of pigtail can be also customized; usually we will

Brand Name:CY COM

Model Number:PLC Splitter

Place of Origin:Shenzhen China

... a whole series of 1xN and 2xN splitters that are tailored for specific applications: 1,a.1x2, 1x4, 1x8, 1x16,1x32, 1x64, 2x2, 2x4, 2x8, 2x16, 2x32, 2x64 Versions of splitters are available. 2, The length of pigtail can be also customized; usually we will

Place of Origin:China

... small size, high reliability, cheap cost and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting. hongking provides whole series of 1xN and 2xN splitter products that are tailored for

Brand Name:KEXINT

Model Number:KXT-FBT-2×2-FC/UPC

Place of Origin:SHENZHEN

...combine signals. The splitting ratio ranges from 1x2 to 1x32 ports for tree couplers, and from 2x2 up to 2x32 for star couplers. Available in single, dual, and tripple wavelength windows(1310/1490/1550nm) . Fiber Optic FBT Coupler is an optical device that

Brand Name:CY COM

Model Number:PLC Splitter

Place of Origin:Shenzhen China

... a whole series of 1xN and 2xN splitters that are tailored for specific applications: 1,a.1x2, 1x4, 1x8, 1x16,1x32, 1x64, 2x2, 2x4, 2x8, 2x16, 2x32, 2x64 Versions of splitters are available. 2, The length of pigtail can be also customized; usually we will

Brand Name:TTI

Model Number:S-1

Place of Origin:Guangdong, China

Splitter FBT 1X2 2x2 fiber coupler Split Ratio: 50/50~95/5, 1310/1550nm, 0.9mm Steel tube type splitter Quick Detail: Name: PLC splitter Type: 1×2, 2x2 Mode: Singlemode Fiber type: G652D, G657A1, G657A2 Cable jacket: PVC, LSZH, OFNR, OFNP Cable length: 1M...

Brand Name:GEZHI or OEM

Model Number:2x2 add drop optical Switch

Place of Origin:China

... at PCB board. The 2x2 optical Bypass switch is swiftly set to bypass mode to isolate the mainnetwork from the local networking device. GEZHI supply various type of optical switch like 1x1, 1x2, 2x2, 1x3, 1x4, Dual 1x2, 2x2, 2x4, Multi-channel, 1x8,

Brand Name:HACEN

Place of Origin:CHINA

... optic connectors between two fiber optic lines. Please note that this document is for reference purposes only and may not fully correspond to the actual product. To ensure accuracy and prevent any information leakage .please contact us ...

Model Number:FBT Coupler 1*2 FBT Coupler-0.9mm-1m

Place of Origin:China

...Coupler-0.9mm 1meter fiber optic coupler splitter Description: PLC (Planar Lightwave Circuit) Splitters are Single Mode fiber optic splitters with an even split ratio from one input fiber to multiple output fibers PLC Splitters are available with your choice of Fiber Optic Connectors: LC/UPC, LC/APC, SC/UPC, SC/APC, FC/UPC, FC/APC, and ST/UPC Specification: Model Number: LC/UPC 1*2 FBT Coupler-0.9mm 1meter Fiber...

Brand Name:KCO, Kocent Optec Limited

Model Number:KCO-ABS-1x8-OM3-3.0-1.0M-LC

Place of Origin:Guangdong, China

...Optical Coupler 1*2 1*4 1*8 SC LC FC ST Connector Multi-mode Optical Fiber MM Splitter Coupler 1*2 1*4 1*8 1*16 1*32 SC LC FC ST Connector​ Descriptions: - Multimode Fiber Optic Coupler allows bi-directional coupling and can be used to either split or combine signals. It uses 50/125 or 62.5/125μm fiber, with low insertion loss and a 850nm operating wavelength. - This 1x8 coupler...

Brand Name:YINGDA

Model Number:AD-FC-SM01-W

Place of Origin:china

Fiber Optic Coupler FC SM SX, Fiber Adapter FC /PC D Type Metal Simplex Fiber Optic Adapter (also called fiber opptic coupler), is a kind of connector in optical fiber transmission, whose both ends can be inserted the different optical fiber connector such as FC, SC, ST, LC, MTRJ, MPO, E2000 to make them interchange, and widely used in optical distribution frame(ODF), optical Fiber...

Brand Name:FOCABLE

Model Number:FC-ST Hybrid Fiber Optic Coupler

Place of Origin:China

Fiber Optic Couplers FC - ST High Precision Zirconia Ceramic Sleeve Stable For FTTX Fiber optic adapter LC - FC, LC - ST, LC - SC, FC - ST, SC - ST hybrid provides the connection between the fiber optic patch cord or pigtails. Fiber optic adapters (also called couplers) are designed to connect two fiber optic cables together. They come in versions to connect single fibers together (simplex), two fibers together (duplex), or sometimes four fibers

Brand Name:OMC or OEM

Model Number:1*3 50:20:30 Dual Window SM 1310 / 1550nm FBT Splitter

Place of Origin:China

...bundle together two or more optical fibers, and then pull the cone machine melt stretching, and real-time monitoring the change of the ratio, spectral ratio requirements after melt stretching, one side retain a single fiber (the rest of the cut) as input,

Brand Name:Geehe or OEM

Model Number:Multimode Fiber Coupler

Place of Origin:Wuhan, China

... are available. Applications Long-haul Telecommunications Digital, Hybrid and AM-Video Systems High Speed Local Area Networks CATV System Description Optic Fiber couplers are designed for

Brand Name:BT-PON

Model Number:SC/UPC-FC/UPC

Place of Origin:Guangdong

...FIBER OPTICAL ADAPTER / COUPLER Product Description: The Fiber optic adaptor is also called fiber optic coupler. It is used to provide a cable to cable fiber connection. They are also called mating sleeves and hybrid adaptors. Mating sleeves means this fiber optic adapter is used to connect the same type fiber optic connectors, while hybrid adaptors are the fiber optic...