earphone cable bending testing

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made In China

... cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable if conducting after some

Brand Name:YUYANG

Model Number:YY616

Place of Origin:China

...Cable Bending Testing Equipment, 6 Station CRIA 0003.2 Wire Testing Equipment Application: The robot cable bending testing equipment conforms to TUV, VDE and UL. It can be used to test bending of the robot cable, flexible cable, bending flexible cable, drag chain cable, chain bend and high flexible cable. The machine is a six-station structure, which is mainly used for repeated bending test...

Brand Name:MIYU

Model Number:MY-XC-360

Place of Origin:China

... Test speed: 5-60 times / minute adjustable 4. Test times: 99999999 times 5. Rotation mode: forward rotation mode, reverse rotation mode, positive and negative rotation mode 6. Test mode: life test, continuity test 7. Counterweight: 50g,100g ,200g ,300g ,

Brand Name:Sinuo

Model Number:SN1112R

Place of Origin:China

... system" Specimen and limitations: Industrial robot cables. Test purpose: Used to test the bending resistance of the power cord of industrial robot cables when entering the joint. Test principle: Using PLC control and servo motor drive, the bending test of

Brand Name:PEGO

Model Number:PG-FT01

Place of Origin:China

... to IEC62196-1 clause 26.4 figure 20 and table 14, it is applied to do mechanical load flexing test of the non-rewirable accessories of ev plug and vehicle connector. Test method: The sample is fixed to the oscillating member of the apparatus so that at

Model Number:LR-A006

Place of Origin:China

Brand Name:Lonroy

...power supply cord".Applicable for bending test of power cord and DC line by related manufacturer and quality inspection department. 2.Specification Test rate 10-60 times/min adjustable Bending Angle 10 ° to 180 ° is adjustable Work station 6 plugs and

Brand Name:YUYANG

Model Number:YYW002

Place of Origin:China

...Cable Flex Test Equipment 6 Station 10~60 Times/Min Description: UL817 IEC60335 cable bending testing machine can test six cables or cord sfitted with plugs simultaneously. This improves testing capacity.IEC60884-1 calls for 10,000 flexing at a rate of 60 flexing per minute. Halfway through the test...

Brand Name:Sinuo

Model Number:SN1112E

Place of Origin:China

... to the standard requirement of IEC 60702-1 clause 13.6, and etc. It is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to drive the

Brand Name:SKYLINE

Model Number:SL-C110

Place of Origin:China

...testing the ability of optical cable to withstand repeated bending, by applying repeated bending force, for qualified optical cable requires that the optical fiber is not broken, the attenuation change of the optical fiber does not exceed the value specified in the optical cable product standard, and the optical cable sheath does not crack. Test...

Brand Name:JIEDONG

Model Number:JD-3003

Place of Origin:Guangdong, China

...Bending Test Machine 1 Station Test Swing Angle 0-360 Degrees Wire Torsion Testing Machine JD-3003 product description: Designed and manufactured according to GB4909.4, ISO2627/R957, CNS-1111/8938, UDC621.315.14/620.175 and JIS3005, suitable for small household appliances such as hair dryers, hair clips, power cords for manufacturers and quality inspection departments. Torque test, electrical connection of earphone cable, data cable

Brand Name:Kingpo

Model Number:GX-4020-A

Place of Origin:China

... Weight 87kg Volume 91×55×99cm Test standard UL, IEC, VDC Equipment Description: The cable bending tester is used for testing bending resistance of outgoing line of power plug and wires. Fix the wires by fixture and add specific load. During test, the

Brand Name:Gaoxin

Model Number:GX-4019

Place of Origin:China

...drive Weight 87kg Volume 91×55×99cm Test standard UL, IEC, VDC 2.Equipment Description: The cable bending tester is used for testing bending resistance of outgoing line of power plug and wires. Fix the wires by fixture and add specific load. During test,

Brand Name:HongCe

Model Number:HDX1316

Place of Origin:China

...h 60 000 bending cycles, i.e. 120 000 single strokes, interruption of the current shall not occur. Cable Testing Equipment After the test, the sample shall withstand the voltage test carried out in accordance with 2.2 of IEC 60227-2, the voltage, however,

Brand Name:Herrman

Model Number:GWQ-90

Place of Origin:China

...cable repeated bending testing machine optic fiber cable repeat beading detector DESCRIPTION The equipment is used to test optical cable resistance repeated bending properties. By applying repeated bending force, for the qualified optical cable, no fiber fracture, fiber attenuation values meet standard, no optic cable jacket cracking. The equipment adopts the man-machine interface and PLC control, TFT true color screen display test

Brand Name:AI

Model Number:AIC22176

Place of Origin:China

...cable bending and torsion tester is according to pre-set test conditions (bending angle, bending rate, number of trials), with a continuously make test sample right and left bend durability test device and straight line torsion durability test equipment through an external mechanical device. Wherein the fixture terminals of torsion test and bend test...

Brand Name:I-suntop

Model Number:GFK-90

Place of Origin:China

... Test Equipment: Optical Fiber Cable Repeated Bending Tester is used to determine the ability of a fiber optic cable to withstand repeated bending (cyclic flexing). Optical Fiber Cable Impact Tester Series allows a cable sample to be bent backwards and

Brand Name:ZL

Model Number:ZL-1027

Place of Origin:China

... at the cable, then to swing the jig right and leftwith the setting angle. after rotating to required cycles then stop to check the cable; or check the rotation cycles after cable broken while the cable is tested by connecting to the electricity. While the

Brand Name:HJ

Model Number:HDX1307

Place of Origin:China

... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a