element assembly rod test probe

Brand Name:kerang

Model Number:HT-U08

Place of Origin:CHINA

...ts) shall be so guarded that flammable material as well as persons will be protected against contacting it. Test sample:Heating elements. Feature:Nylon handle + probe, it is manufactured according to the standard figure. Parameters: Picture for reference:

Model Number:TP04

iec 60529 IP2X code rod test probe iec 60529 IP2X code rod test probe Model TP04 2.5mm rod test probe,tes probe Dviec 61032 Test Probe is intended to verify the protection of person aganist access to to harzardous parts of an IP4 code.Also used to verify ...

Brand Name:PEGO Electronics

Model Number:PG-TPR8

Place of Origin:China

....102, it is applied to check if the blades of hand-held blenders are completely screened from above and unable to touch a flat surface while rotating. The cylindrical rod from any position between the vertical and an angle of

Brand Name:JLX

Model Number:LX-1203

Place of Origin:Made in China

... tool to proceed protecting electric shock test of household and similar electrical appliances. Technical parameters: 1. Rod length: 100 mm 2. Rod diameter: 2.5 mm 3. Circular-baffle diameter: 35 mm 4. Handle diameter: 10 mm 5. Handle length: 100 mm 6.

Brand Name:Sinuo

Model Number:SN2210-25

Place of Origin:China

IEC60335-2-14 Hand-held blenders φ40 mm Cylinder Rod Test Probe Standard and Application: The φ40mm cylinder rod meets the standard requirements of IEC 60335-2-14 Clause 20.103. It is used to verify the hand-held blenders other than hand-...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-U05

...Probe Conform to the UL1278 Fig 10.1 UL Test Probe Product details: This probe conforms to the standard requirement of UL1278 Fig 10.1. The handle is made of nylon while the probe is made of stainless steel. Standard:UL1278 Fig 10.1. Application:The heating element and any part of the element assembly (such as an element...

Brand Name:KingPo

Place of Origin:China

... is made of nylon and the probe is made of stainless steel. Standard:UL1278 Fig 10.3. Application:The heating element and any part of the element assembly (such as an element support, sheath and similar parts) shall be so guarded that flammable material as

Brand Name:kingpo

Model Number:KP-IP3X

Place of Origin:china

...appliance of against electric shock protection test. Technical parameters 1, Test Probe Length :100mm 2, Test Probe Diameter:2.5mm 3,Dam- sphere Diameter:35mm 4,Handle Diameter:10mm 5,Handle Length 100mm 6, According to IEC61032 figure 3 (the Test probe C)

Brand Name:SHC

Model Number:SC-F4D

Place of Origin:China

... mm Dam-sphere diameter SФ35±0.2 mm SФ35±0.2 mm Handle Diameter Ф10 mm Ф10 mm Test probe length 100±0.2 mm 100±0.2 mm Handle Length 100 mm ---- Force ---- 3N force Standard IEC61032.1 IEC60529 ...

Brand Name:Lonroy

Place of Origin:China

... inspection to prevent direct contact of handheld tools.It can be customized with a 3 ± 0.3N pushing force. Standards Compliant with the requirements of IEC61032 Figure 2 test fixture C,

Brand Name:CUBERYLLIUM®

Model Number:C17300

Place of Origin:China

...Rod TD04&TH04 C17300 Beryllium Copper Rod 2mm~10mm For Spring Contact Test Probes & BeCu Rod TD04&TH04 C17300 Beryllium Copper Rod 2mm~10mm for Spring Contact Test Probes Product Description: Name: High Strength Beryllium Copper Bar Grade: C17300 End Product Form: Rods...

Brand Name:BOGES

Model Number:BGS-MS156-137-SMA-L

Place of Origin:Dongguan, Guangdong, China

Test Application RF cable Assembly With SMA Male And Test Probe To Hirose MS156 Connector Detail Product Description Frequency: DC~3GHz S.W.R: 1.3 Max. Impedance:　50 ohm Cable: RF 1.37 Cable Connector: MS156 Connector, SMA Male Application: 1. Wireless industries 2. Communication equipment 3. Base stations 4. Telecom 5. Test...

Brand Name:JIETENG

Model Number:PCB circuit board

Place of Origin:China

...Assembly is an electronic circuit board assembly that involves surface mount soldering and surface mount device assembly. This product uses green solder mask and has a HASL surface finish. The minimum line width and space is 0.1mm/0.1mm to ensure a high quality assembly. The assembled board is tested using a flying probe test to guarantee that all components are functioning properly. PCB SMT Assembly...

Brand Name:Sinuo

Model Number:SN2210-84

Place of Origin:China

IEC62196 75N Test Rod For Electric Vehicle Accesories Endurance Test Complied Standards & Clauses IEC 62196-1Ed.4CDV: 2020 "Plugs, Socket - Outlets and Couplers for Industrial and Similar Applications, and For Electric Vehicles" clause 26.6. Equipment ...

Brand Name:SUPER

Model Number:1700 1800

Place of Origin:Henan ,China

Molybdenum Disilicide Heater Rods High Temperature U W L Electric Mosi2 Muffle Furnace Molybdenum Disilicide Heater Rods Application: SUPER 1700, 1800, 1900 MoSi2 electric mosi2 heater for muffle furnace are extensively used in the industries of metallurgy...

Brand Name:TMTeck

Model Number:D11R

Place of Origin:China

DTM Delay Line Probe D11R single element contact transducer designed specifically for use with replaceable delay line Features: Replaceable Delay Line Probe: D11R A replaceable delay line is a single element contact transducer designed specifically for use...

Brand Name:Rtench

Model Number:PG-1.5-0.4-1.03-1.78-2.4

Place of Origin:China

SMT POGO PIN A complete connection path requires a mating receptacle for the pin to engage, which is termed a target or land. A pogo target consists of a flat or concave metal surface, which unlike the pins, has no moving parts. Targets may be separate ...

Brand Name:KOMATSU

Model Number:PC200-7

Place of Origin:CN

...Element Assembly Back Cover Filter Parts Komatsu Accessories Specifiions: item Excavator Parts Condition New Applicable Industries Building Material Shops, Machinery Repair Shops, Manufacturing Plant, Retail, Energy & Mining After Warranty Service Video technical support, Online support Local Service Loion None Showroom Loion None Video outgoing-inspection Provided Machinery Test...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-13

... short test pin, test pin 13, test rod Product Description IEC60065 IEC61032 short test pin, test pin 13, test rod Short test pin meets the standard requirements of IEC60132 IEC60065 IEC60335 IEC60950. The Test Probe is a wide range of probes to meet the ...