figure 8 cord flexing test apparatus

Brand Name:PEGO

Model Number:PG-FT01

Place of Origin:China

...Figure 8 Two-Stations Supply Cord Flexing Test Apparatus PLC Control 1. Introduction Power cord flexing test apparatus is designed according to IEC60335-1 clause 25.14 and figure 8, IEC60335-2-14 clause 25.14, IEC60884-1 clause 23.4 and figure 21, AS/NZS3112 clause 2.13.12.2 and figure 2.2, BS1363-1 clause 19.5 and figure 18. It is widely used in power cord bending and swing testing on power cords...

Brand Name:KINGPO

Place of Origin:DONGGUAN

Model Number:KP-8820

...Figure 8 Power Cord Flexing Test Apparatus Testing the Protection Capability of Cord Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a supply cord that are moved while in operation shall be constructed so that the supply cord...

Brand Name:Sinuo

Model Number:SN2121

Place of Origin:China

...Cord Flexing Test Apparatus For Flexible Cable Plugs Product Information For Power Cord Flexing Test Apparatus: The power cord flexing test apparatus meets the requirements of IEC 60884-1:2022 figure 21 clause 23.4, which is used to process the flexing test for the flexible cable of non-rewirable plugs and non-rewirable portable socket-outlets. Technical parameters For Power Cord Flexing Test Apparatus...

Brand Name:HJ

Model Number:HJ0608A

Place of Origin:China

... 23.3 and 25.14, figure 8. Application: It is used to check the power cord flexing (bending) resistance performance of the small household appliances (such as Coffee pot / electric iron) and lamps, also applicable for power cord flexing endurance tester of

Brand Name:KINGPO

Place of Origin:China

...Adjustable Bend Angle Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a supply cord that are moved

Brand Name:HongCe

Model Number:PCF-1

Place of Origin:China

...appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a supply cord that are moved while in operation shall be constructed so that the supply cord is adequately protected against excessive flexing where it

Brand Name:SHC

Model Number:SC-RL03

Place of Origin:China

IEC60884 figure 20 cord retention test apparatus manual type Product details: This device conforms to the standard of IEC60884-1 table 18. It is used to test plugs, mobile sockets, fixed parts with wires and their couplings under the protection of the ...

Brand Name:MIYU

Model Number:MY-XC-C6-R

Place of Origin:China

Wire/Cable Bending Tester (MY-XC-C6), Sheet metal material with white color Description This testing machine is customized according to the "General Safety Requirements for Communication Cord and Power Cord" and is written by advanced touch screen. PLC ...

Brand Name:Sinuo

Model Number:SN1009

Place of Origin:China

...Flexing Testing Apparatus Complied Standards & Clauses IEC 62196-1Ed.4CDV: 2020 "Plugs, Socket - Outlets and Couplers for Industrial and Similar Applications, and For Electric Vehicles" clause 26.4, fig 20. IEC60309-1: 2012 clause 24.4 figure 9. Equipment Overview The flexibility testing apparatus...

Place of Origin:China

Brand Name:KeRang

... for 10,000 flexing at a rate of 60 flexing per minute. Six cables or cords fitted with plugs can be tested simultaneously. The cables are connected to a socket and the tail of the cable is connected to the tester to detect if an internal fault occurs with