figure v 1 test probe

Model Number:TP12

... with a plastic handle. Meets IEC 60950 and 61032, Figure 9 (Test Probe} Model TP12 IIEC 61032, Figure 9 short test probe pin Used to test accessibility through enclosure openings per IEC, EN, UL and CSA Standards. Body is plastic, tip is stainless steel.

Brand Name:SHC

Model Number:SC-F913

Place of Origin:China

...15 0 -0.1 4 Ф25±0.2 5 4 6 Ф10 7 20 Standard Test Probe Kit: IEC61032 Figure 2 Test Probe B standard test finger IEC61032 Figure 16 Test probe 41​ Test Thorn Probe IEC61032 Figure9 Test probe13, short pin Information: This pin is intended to verify the

Brand Name:Sinuo

Model Number:SN2210-23

Place of Origin:China

...Figure 2C Telecom Test Probe Product information: The telecom test probe conforms to IEC60950 2013 clause 2.1.1.1, 6.2.1, figure 2C, IEC60065:2014 Annex B, IEC 62151 Figure 3 and UL 6500 figure B.1 and etc. It is used to check whether the bare parts of TNV circuits of information technology equipment have sufficient protection. There is a M6 thread on the end of the handle, through where the test probe...

Brand Name:HJ

Model Number:HT-I04

Place of Origin:China

IEC61032 Test Finger Probe Figure 4 Test Probe D With 1mm Diameter Wire Standard: IEC 61032 ‘Protection of persons and equipment by enclosures – Probes for verification’ figure 4 test probe D. IEC 60529 Degrees of protection provided by enclosures (IP Code...

Brand Name:kingpo

Model Number:IEC 60601-2-3-Figure 201. 102

Place of Origin:china

IEC 60601-2-3-Figure 201. 102- Test probe

Brand Name:KingPo

Place of Origin:China

...Test Probe Complies With IEC60950 Figure 2C Product information: Telecom test probe complies with IEC60950 figure 2C and UL6500 figure B.1 standards. It is used for the bare parts of TNV circuits of information technology equipment to see whether they have sufficient protection. Technical parameters: Hot Tags: iec60950 figure...

Place of Origin:China

Brand Name:Julixing

...Figure 14 Milling Test Probe 31 of Access Probes to Hazardous Mechanical Parts This probe is intended to verify the protection against access to hazardous mechanical parts of the grinding system of food waste disposal units. Probes specifically intended to verify the protection of persons against access to hazardous mechanical parts. Specification: Test Probe 31(Grinding Probe) 1. According to : IEC61032-1997 fig 14 2. The Test

Brand Name:HongCe

Model Number:HT-I98

Place of Origin:China

...Test Equipment IEC 60132 60335 Standard Test Probe Pin Thorn Kit Product information: The IEC 60132/60335 standard Test Probe Pin Thorn Kit are the necessary items for household and similar electrical appliances anti-electric shock protection test. The test kit consists of : No. Item Name Stadanrd 1 Test Probe B IEC 61032 figure 2 2 Test Probe 13 IEC 61032 figure 9 3 Test Probe 41 IEC 61032 figure 16 1. Stadard Test Probe...

Brand Name:PEGO

Model Number:PG-TP884

Place of Origin:China

...Test Probes According to IEC60884-1 Figure 9 and Figure 10 for Socket - Outlet 1. Introduction of Socket-outlet test probes: The probes are designed according to IEC60884-1 figure 9 and figure 10. 20N test probe is for checking non-accessibility live part through shutters, 1N test probe...

Brand Name:Sinuo

Model Number:SN2110A

Place of Origin:China

...Test Probe 20N Complied Standards & Clauses The test probe confirm to the IEC 62196-1:2022 clause 10.2, figure 9. Equipment Overview The test probe confirm to the IEC 62196-1:2022 clause 10.2, figure 9. Touching the specimen with the end of the probe and then respectively exert the force of 20N until the probe...

Brand Name:kerang

Model Number:HT-I20/21

Place of Origin:CHINA

... HT-I21 test probe with 1N force is for testing whether the live parts with the protection of socket can be touched. Test sample:Socket. Feature:Nylon handle + probe. Parameters: 1,Test probe with force of 20N HT-I20: The probe part: 3+0.03 0×1+0.015 0

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

...Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing or the internal baffle of the housing. Can be ordered with 10~50N thrust. Can be ordered with 10~75N thrust. Test Finger Usage 1. As shown in the figure, the finger portion of the thrust test

Brand Name:Lonroy

Place of Origin:China

... IP1, IEC60529 IP1. Product Overview To test the prevention of human contact with dangerous components, and also for protection tests to prevent the back of the hand from touching. Sample range: Easily accessible live components or mechanical parts of the

Brand Name:YUYANG

Model Number:YY1149

Place of Origin:China

... 1500.48,49. This product include two probes A and B, use to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe B: for the children over 3 years old. Parameters:

Brand Name:GENY

Model Number:Bluetooth Optical Probe

Place of Origin:China

...Probe for Meter Testing Accessory 1. Introduction BTIR is a transparent data transmission module used for meter reading. It transfers IR data to mobile application via Bluetooth low energy 4.2. It provides a new way to read meter data by optical port. Figure...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-136333

...test on pins of BS1363 figure 33 SHENZHEN BONAD PRECISION INSTRUMENT COMPANY LIMITED is a high-tech company in Shenzhen, producing all kinds of precise instrument. Our main line covers Accessibility Probes, Test Chamber, Weight Sensor, Load Cell, Electrical Ruler, Glow Wire Tester, Spring Impact Hammer, Electrical Safety Tester Series, Environment Tester, Universal Testing...

Brand Name:szcx

Model Number:CX-T4D

Place of Origin:china

...Test Probe D ( Test Probe D) is the necessary tool to proceed protecting electric shock test of household and similar electrical appliances. Technical parameters: 1. Wire length: 100 mm 2. Wire diameter: 1.0 mm 3. Circular-baffle diameter: 35 mm 4. Handle diameter: 10 mm 5. Handle length: 100 mm 6. According to IEC 61032 figure 4 (the Test

Brand Name:Bently Nevada

Model Number:133827-01

Place of Origin:USA

... test equipment as shown in Figure 3-1. 2. Adjust the spindle micrometer on the Tk3 test and calibration kit until it indicates 20 mils (0.51 mm). 3. Insert the probe into the Tk3 probe holder. Adiust the probe in the holder until the diaital multimeter

Brand Name:Huatec

Model Number:IIW V2 Block

Place of Origin:China

...test block (V-2 test block) is the standard test block approved by the International Welding Society. V-2 (DIN54122) compared with IIW test block, V-2 test block has the advantages of light weight and easy to carry, especially suitable for field use. See Figure 1-2. Main Points of use: (1) The incident point and sensitivity margin of the inclined probe...