flammability leakage tracking test equipment

Brand Name:Sinuo

Model Number:SN774

Place of Origin:China

IEC 60884-1 Leakage Tracking Test Equipment Flammability Test For Insulating Material Product Information For Leakage Tracking Test Equipment: The tester is designed and manufactured according to the standard requirements of IEC60112, and required by IEC ...

Brand Name:JIEDONG

Model Number:JD-3054

Place of Origin:Guangdong, China

... between the two electrodes on the surface of the solid insulating material, and drop the specified concentration of liquid at a certain height to evaluate the leakage resistance of the surface of the solid insulating material under electric field and

Brand Name:Sinuo

Model Number:SN774

Place of Origin:China

...Vehicle Leakage Tracking Test Equipment Complied Standards & Clauses IEC 62196-1 Ed.4CDV 2020 clause 28.4, 29.6. IEC60335-1 clause 29.2 and Annex N, IEC 60065:2014 clause 13.4, IEC60598-1, IEC 60884-1:2013 clause 28.2, UL746A ASTM D3638-92 Equipment ...

Brand Name:Kinte

Model Number:WH-8902JK

Place of Origin:Guangdong,China (Mainland)

...Flammability Testing Equipment WH-8902JK Leakage Tracking Test​ Leakage tracking test is the IEC60112: 2003 "solid insulation material resistance to tracking index and compared to the determination of trace index", UL 746A, ASTM D 3638-92, DIN 53480 standards such as simulation test project. The tracking test...

Brand Name:HongCe

Model Number:LT-3

Place of Origin:China

... to the requirements of the relevant standards, such as IEC 60112, IEC60695 and etc. It is used for determination of the relative resistance to tracking performance that solid electrical insulating material under the action of an electric field, when the

Brand Name:HTI

Model Number:HTB-033

Place of Origin:Guangdong,China(Mainland)

...resistance to tracking and erosion test, simulate the frequency (48HZ-62HZ) or a corresponding DC Voltage, liquid contaminants and ramps samples by electrical resistance to tracking and erosion measurements assessed under severe environmental conditions of

Brand Name:KINGPO

Place of Origin:Mainland China

... standards, such as IEC60695. It is used for determination of the relative resistance to tracking performance that solid electrical insulating material under the action of an electric field, when the surface exposed to water containing impurities. If

Brand Name:vouch

Model Number:5201

Place of Origin:CHINA

Leakage Tracking Test Apparatus , Plastics Electricity Industry Wheel Tracking Device Technical Description: This product is used in electrical products under the influence of moisture and impurity environment, between the different polarity of the live parts or between the live parts and the grounding metal parts may cause insulation on the leakage...

Brand Name:DAXIAN

Model Number:DX8352

Place of Origin:China

DX8352 Leakage Tracking Tester 1. Scope of application: The tracking tester is to apply a certain voltage and drop a polluted liquid (0.1%NH4 CL) with a specified droplet volume (0.1%NH4 CL) at a fixed ×height (35mm) at a fixed height (35mm) on the surface...

Brand Name:HOOHA

Place of Origin:China

Description: ASTM D3638-92 low voltage tracking tester simulates wet/moisture condition, test tracking index(CTI) and anti tracking index(PTI). It is used for electrical electronic products, solid insulating materials of household electrical appliance and ...

Brand Name:YUYANG

Model Number:YYC002

Place of Origin:CHINA

... ISO 1210: 1992 and other standards. The flammability test is to use a certain size of the Bunsen burner (Bunsen burner) and a specific gas source (methane or natural gas), according to a certain ...

Brand Name:PEGO GROUP

Model Number:PG-NF

Place of Origin:China

...Flammability Testing Equipment - 12 Months Warranty 1. Introduction The Needle Flame Tester consists of a dia.0.9mm needle burner that tilts to 45 degree from the vertical and is fueled with butane gas. The fire hazard of the specimen is assessed by measuring the burning duration of the specimen, and any ignition of the wrapping tissue and white pine board below the specimen. The equipment specifies a needle-flame test

Brand Name:SKYLINE

Model Number:SL-FL089

Place of Origin:China

... ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame (length ...

Brand Name:GDZX

Model Number:LBQ-III

Place of Origin:CHINA

..., leakage non-operating current, leakage operating time of the leakage protector; adopt 16 bits blue screen, it is convenient and intuitive. High accuracy, small size, light weight, exquisite ...

Brand Name:HOOHA

Model Number:ZY6058

Place of Origin:Guangdong

...machine tool electrical appliances, motor, electric tools, electronic instruments, electrical instrumentation, information technology and equipment of the production, research and quality inspection departments, can also be applied to insulation materials,

Brand Name:Fanke High-voltage

Model Number:ZGF-120KV/3mA

Place of Origin:Wuhan , China

Portable DC Hipot Test Set , DC High Voltage Tester , DC Generator Factory Product Description Newly researched, designed, and manufactured according to Common technical condition for portable DC HV generator of China Industry Standard, the ZGF series DC ...

Brand Name:Shice

Model Number:SC-LCT

Place of Origin:China

IEC60065:2014 clause 9.1.1.2 b Leakage Current Tester Output Current 0.03~2mA/20mA Standard: Confirm to IEC60065:2014 clause 9.1.1.2 b, IEC60950, IEC60335, IEC60598-1 Parameters: Model RK2675C RK2675D RK2675E Output Voltage 0~250V Output current 0.03~2mA/...

Place of Origin:China

Brand Name:KeRang

... ) and required time (30s) drops with the voltage between the platinum electrodes (2mm× 5mm )on the surface of solid insulating material. Thus the users evaluate the tracking resistance performance of solid insulating material surface under the

Brand Name:HJ

Model Number:LT-3

Place of Origin:China

Leakage Tracking Tester LT-3 0～600V Adjustable Precision 1.5％ Standard of Leakage Tracking Tester: IEC60112-2009, UL746A, IEC60335-1, IEC60598-1 and ASTM D3638-92. Application of Leakage Tracking Tester: It is used to evaluate the tracking resistance ...