flammability nbs smoke density chamber

Brand Name:GOLD

Model Number:GD-ISO 5659

Place of Origin:China

ISO 5659-2 ASTM E662 Flammability NBS Smoke Density Test Chamber For Plastic NBS Smoke Density Test Chamber Introduction: The plastic smoke density test system is developed in strict accordance with the ISO 5659 international standard. It can work with a ...

Brand Name:SKYLINE

Model Number:SL-7602

Place of Origin:China

3 Phase Flammability Testing Equipment , NBS Smoke Density Chamber Standards According to NBS ENS711 of ASTM E662 etc. Used range This tester has been applied to determine smoke density and wildly accepted by many industries, such as plastics, rubbers, ...

Brand Name:YUYANG

Model Number:YYF027

Place of Origin:China

... sample of certain thickness is exposed to heat source(2.5W/cm2, 2KW/m2 using by ASTM E 662 furnace) or fire in a chamber. Using ISO 5659 conical radiant heat furnace, we can change the heating condition from 10KW/m2 to 5KW/m2 or

Brand Name:YUYANG

Model Number:YYF036

Place of Origin:China

... characteristics of vehicle interior and inflammable cable. Measure the optical density of smoke when a certain thick specimen is exposed to a heat source of 50KW/m2. Standards: ISO 5659-2 Plastic smoke generation, determination of optical density by a

Brand Name:AI

Model Number:SDB

Place of Origin:CHINA

NBS Smoke Density Chamber Introduction The Smoke Density Test Chamber has proved to be one of the most versatile fire testing instruments since its inception in the 1980s. It is the most widely accepted apparatus for the measurement of smoke from burning materials and measures specific optical density under flaming and non-flaming conditions. It is also used for the extraction of toxic gas. Structure of Chamber 1, The NBS Smoke Density...

Brand Name:Delta

Model Number:SDB

Place of Origin:China

... since its inception in the 1980s. SDB NBS Smoke Optical Density Testing Equipment is the most widely accepted apparatus for the measurement of smoke from burning materials and measures specific optical density under flaming and non-flaming conditions.

Brand Name:DAXIAN

Model Number:DX8368

Place of Origin:China

... in the vertical position in thicknesses up to and including 1 in. (25.4 mm). The test chamber is approximately 3 feet (915 mm) high, 3 feet (915 mm) wide, and 2 feet (610 mm) deep, encompassing a volume of about two-thirds of a ...

Brand Name:HAIDA

Model Number:HD-R909

Place of Origin:Guangdong, China (Mainland)

... products. It evaluates the density of smoke by measuring the loss of light flux in the test chamber, thereby helping to evaluate the combustion performance of the material. Technical Parameters Model HD-R909 Measuring range 0.0001-100%; (Smoke density)

Brand Name:Haida

Model Number:HD-R909

Place of Origin:China

... products. It evaluates the density of smoke by measuring the loss of light flux in the test chamber, thereby helping to evaluate the combustion performance of the material. Technical Parameters Model HD-R909 Measuring range 0.0001-100%; (Smoke density)

Brand Name:Hust Tony Instruments

Model Number:HTB-036

Place of Origin:China

HTB-036 NBS Smoke Density Chamber for Standard ASTM E662 Application NBS smoke density chamber measures the optical density of smoke when a certain thick specimen is exposed to a heat source of 25KW/50KW/. It is widely employed in assessing performance of ...

Brand Name:VOUCH

Model Number:5920

Place of Origin:CHINA

...Smoke Density Chamber For Plastic Material Standard ISO5659-2 Smoke Density Apparatus is used for measuring & observing the relative amount (Density) of smoke produced by the burning Smoke Density Apparatus is used for measuring & observing the relative amount (Density) of smoke...

Brand Name:Lonroy

Model Number:LR-K016

Place of Origin:China

IEC 61034 Smoke Density Measuring Device for Cable Optical Cable Burning Test Machine 1. Introduction It meets the requirements of GB/T17651.1~2 and IEC61034-1~2 “Determination of Smoke Density of Burning Cables or Fiber Optic Cables under Specific ...

Place of Origin:China

Brand Name:CHENGFENG

Equipment performance indicators: Power supply voltage: AC220V±10% 50HZ current≤10A; Maximum power: 1.5KW; Heating power: 800-1000W; Temperature control range: 300-1000°C; Control accuracy: static ± 1°C (maintenance time is greater than 2min); Air flow: 0-...

Brand Name:HOOHA

Model Number:ZY6166D-P

Place of Origin:China

NBS Plastic Vertical Flammability Chamber ZY6166D-PC Smoke Density Test Box Scope of application: 1. ZY6166D-PC plastic smoke density test box is widely used in various fields, mainly used for measuring the smoke produced by the combustion of materials and the optical density of flame and flame burning; The FTIR Fourier infrared analyzer is also used for the detection of smoke toxicity (HCN, NOX, CO, HF, HCL, SO2). 2 boxes, plastic smoke density

Brand Name:lixian

Model Number:HZ-Building Material Fire Tester-7

Place of Origin:CHINA

...Smoke Density Test Chamber Smoke Density Test Chamber Description: The Federal Aviation Administration's FAA-approved NBS Smoke Density Test Box meets all the latest FAA test standards and numerous aerospace test standards such as BSS 7238, BSS 7239, AITM 2.0007, AITM 3.0005, etc., while meeting domestic aviation testing. Standards, such as the HB6577 smoke density test standard. Smoke Density...

Brand Name:BAXIT

Model Number:BXT-JC

Place of Origin:Shanghai, China(mainland)

Great Quality Building Material Smoke Density Tester First, the scope of application: The building material smoke density tester is developed according to the technical conditions stipulated in the national standard GB/T8627-2007 "Test method for ...

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

...significant position. It is a specialized piece of equipment designed to accurately measure the smoke density generated during the combustion or pyrolysis of various materials, providing crucial data for evaluating fire hazards and ensuring compliance with

Brand Name:ZL

Model Number:ZL-1049

Place of Origin:China

ASTM E662 Burning Smoke Density test Chamber / Materials Smoke Density Testing Machine Temperature Measuring Device: A temperature sensor is installed on the inner surface of the door at a height of 1.5M from the ground and 0.5M from the wall. Monitor the ...

Brand Name:TESTEX

Model Number:TF320

Place of Origin:China

...Flammability Tester Auto - Ignition And Record Burning Time Automatically Application NFPA 701-1 Flammability Tester, to determine the ignition resistance properties of draperies and other hanging fabrics according to test method NFPA 701#1, and it is suitable for single-layer or multi-layer fabrics, but not suitable for fabrics with density larger than 700g/m2 (21oz/yd2). Specifications Open-type burning chamber structure; Chamber