flow testing equipment

Brand Name:Kinte

Model Number:ISO 5801, JIS B8330, JIS C9603

Place of Origin:Guangdong,China (Mainland)

... for household and similar purposes, and is in accordance with testing requirements of GB/T 1236 Industrial Fans-Performance Testing Using Standardized Airways, and requirements of ISO 5801, JIS B8330, JIS C9603 and other standards. ● Test principle:

Brand Name:LIYI

Model Number:RR

Place of Origin:Dongguan

...Flow Index Tester, Melt Flow Test Equipment 220V Description: Cheap 380V Customized Tablet MFI Tester can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber, resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or themelt volume flow...

Brand Name:ZYD

Model Number:ZYD-T04

Place of Origin:CHINA

... common units are: L/min, that is, L. Americans commonly used GPM this flow unit, that is, gallons per minute, 1GPM=3.785L/min Function: 1, flow and pressure can be adjusted; 2, the water temperature can be set, at room temperature to 90 C range can be

Brand Name:Zeayeto

Model Number:FIC-601

Place of Origin:China

FIC-601 Fuel Injector Tester And Cleaner Fuel Injector Flow Test Equipment Working principle Through the set pressure value, the oil in the oil pump is supplied to the fuel injection nozzle through the oil-distributing pump, and then the fuel injector ...

Brand Name:HongCe

Model Number:HH0803

Place of Origin:China

...Test Equipment | 121-Hole Precision Spray | 10L/min Water Flow | 150Kpa Pressure | IPX3 and IPX4 Compliance Tester Product introduction HH0803 anti-spray and water handheld test device is a high-precision IP protection grade test device designed for electronic equipment. It has 121 0.5mm water spray holes, provides 10L/min water flow...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R803

...Testing Machine , Plastic Melt Flow Rate Testing Equipments Principle: Plastic Melt Flow Rate Testing Equipments (melt index) is plastic at a temperature and load, the melt every 10 minutes through a standard capillary die quality or melt volume, with MFR (MI) or the MVR value, which can distinguish thermoplastic adhesive in the molten state flow...

Brand Name:BOTO

Model Number:BT-LC-201

Place of Origin:shanghai

...Test machine Test Equipment Product Description Function description of filter material test bench It mainly tests filtration efficiency and air flow resistance 1. Negative pressure system is used in the whole test equipment. 2. The aerosol enters through the test chamber and passes through the tested filter material according to the standard flow...

Brand Name:kingpo

Model Number:KP-IPX56

Place of Origin:china

...IP Testing Equipment Technical Parameters: 1 Control system: PLC controlled 3 IPX5 nozzle diameter: φ6.3 mm 4 IPX6 nozzle diameter: φ12.5 mm 5 IPX5 water flow: 12.5±5% L/min 6 IPX6 water flow: 100±5% L/min 7 Water pressure: adjustment 8 Water flow : ...

Brand Name:Sinuo

Model Number:SN1703

Place of Origin:China

...Test Equipment Product Overview: This abrasion resistance test equipment for flow-through hoses is in accordance with IEC 60335-2-2, Article 21.102, Figure 101. It is suitable for testing the abrasion resistance of flow-through hoses for vacuum cleaners or suction cleaning equipment...

Place of Origin:CHINA

Brand Name:ADMTECK

Model Number:ADM8719

....5KW(25HP)； 2. Working voltage: 3 phase 220/380/415V, 50HZ/60HZ； 3. Speed range: 0—4000rpm； 4. Supply pressure of the testing fuel: 0—4bar； 5

Brand Name:SKYLINE

Place of Origin:China

...Test Device Application Test equipment suitable for smoke toxicity hazard of stable production of tobacco. Technical parameters Material smoke toxicity test equipment performance index Power supply voltage AC220V±10% 50HZ current ≤10A Maximum power consumption 1.5KW Heating power 800-1000W Temperature control range 300-1000 °C Control accuracy static ± 1 ° C Air flow...

Brand Name:JC Wellhead

Model Number:3 1/16" Gas Testing Manifold

Place of Origin:China

...Testing Manifold with choke valves API 16C Gas Testing Manifold The gas testing manifold is a kind of surface well testing equipment, it is the high pressure well manifold used for controlling the fluid pressure and flow, normally manifold offers the option of directing flow through either choke while isolating the other for choke changes, maintenance or repair. The gas testing...

Brand Name:KeRang

Place of Origin:China

...Test Equipment . User Define Operation 1. Determine the rainfall(drop flow) according to standard requirements. Because the system is the use of automatic flow control technology, the rainfall can be calibrated in this screen. Calibration method: The size of the water flow determines the size of rainfall, the proportion between the two. So set the flow...

Brand Name:REFOND

Model Number:RF306A

Place of Origin:Shen Zhen, China (Mainland)

...Fixed Flow Rate Bursting Mode: Flow rate(5-100kPa/s)can be set to meet different test methods, such as the M&S test standard. Applications Testing the knitted, woven and non-woven fabric, paper and cardboard for largest height and bursting pressure values.

Brand Name:ZL

Model Number:ZL-3013

Place of Origin:China

... the melt flow rate of thermoplastics (MFR; units: g/10min) instrument. For polyethylene, polypropylene, polyoxymethylene, ABS resin, polycarbonate, nylon, plastics and other polymers fluoride melt flow rate at high temperature determination. How it works:

Brand Name:SHC

Model Number:SC-XZ

Place of Origin:China

MFR And MVR Mfi Melt Flow Index Test Equipment Melt Flow Indexer Product Specifications: Model No SC-MI-400 Machine size(W*H*D) 250*540*390mm Temperature range Room ...

Place of Origin:China

Brand Name:GC

Model Number:GC-MI-CP

...flow index test machine(MFR) is a laboratory instrument used to measure the flow properties of a polymer melt. This test is important for determining the viscosity and flow behavior of a polymer material, which can affect its processing and performance in various applications. -The melt flow index test is commonly used in the plastics industry to compare the flow...

Brand Name:LIYI

Place of Origin:China

Model Number:LY-RR

..., polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Characteristics: 1. Fast heating speed, very small overshoot. 2.

Brand Name:BAXIT

Model Number:GLO-JC2

Place of Origin:Shanghai, China(mainland)

...-pressure auto-ignition and knob-assisted gas flow adjustment! First, the scope of use The JCK-2 type building material flammability test furnace is a test method for determining whether a building material has flammability under specified conditions, and

Brand Name:KEJIAN

Model Number:KJ-3092

Place of Origin:China

...Flow Rate Meter Plastic Testing Equipments​ Melt Flow Rate Meter Uses: KJ-3092 melt flow rate testing instrument can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Melt Flow...