g13 lampholders 7006 60c

Brand Name:kingpo

Model Number:IEC60598-1-clause 4.4.4

Place of Origin:china

...) G13 lampholders Conform to IEC60061-3-7006-60C (The end of the gauge has an M6 thread that can be connected to the push-pull gauger) Lampholders for a fluorescent lamp, with a test-cap in position, are subjected, for 1 min, to a pressure applied to the

Brand Name:PEGO

Model Number:PG-AFD

Place of Origin:China

IEC60598-1 Clause 4.4.4 G5/G13 Lampholders Axial Force Test Device for Fluorescent Lamps 1. Introduction The axial force test device is designed to test the lampholders (G5, G13, G23, G10q, GR8) for fluorescent lamps according to IEC60598-1 clause 4.4...

Brand Name:Sinuo

Model Number:SN2101-G13

Place of Origin:China

...G13 Double Ended Lamp Holder Go Gauge Measuring Gauges Product Information For G13 Double Ended Lamp Holder: The G13 Double-ended Lamp Holder Go Gauge is conforming to IEC 60061-3-2007, 7006-60C-3 Ⅰ and Ⅱ. To check a combined pair of flexible or inflexible lampholders G13 with regard to entry of lamp pins. It shall be possible to insert each gauge into a combined pair of lampholders...

Brand Name:SHC

Model Number:SC-E14H1

Place of Origin:China

...Lampholders Gauge Screw Lamp Holder Gauges 7006-25-7 IEC60061-3 E14 lampholder gauge list 7006-25-7 Go Gauges for screw threads of lampholders E10 E14 E40 7006-26-4 NOT GO gauges for screw threads of lampholders E10, EP10, EY10, E14, E27, E39 and E40 7006-30-2 Plug gauge for E14 lampholder for testing contact making 7006-31-5 Gauge for testing contact-making and protection against accidental contact during insertion of lamp in lampholders...

Brand Name:KingPo

Place of Origin:China

..., IEC60399 Model Number Gauge Name 7006-25-7 “GO” GAUGE FOR SCREW THREADS OF LAMPHOLDERS E10, E14 AND E40 7006-26-4 “NOT GO” GAUGES FOR SCREW THREADS OF LAMPHOLDERS E10,EP10,EY10,E14,E27,E39 AND E40 7006-30-2 PLUG GAUGE FOR E14 LAMPHOLDER FOR

Brand Name:JLX

Model Number:7006-12A-2

Place of Origin:Made in China

...the rerstricted use of these gauges, See "PURPOSE" below. Edge slightly chamfered (see sheet 7006-1) PURPOSE: The gauge shall be used solely to check interchangeability with respect to the corresponding caps B22d and BY22d on finished lamps respectively,

Brand Name:ZOMLNK

Model Number:ZK-TU104

Place of Origin:Guangdong, China

G13 Lamp holder Iron Base LED Tube Bracket for Double Fluorescent Tube Lights Key Words of LED Tube Bracket: * Power: 2x2FT / 2x4FT / 2x5FT LED tubes * Operating Voltage: AC100-277V/50-60Hz * Fully wired with VDE certified wires, terminal block, G13 lampholders; * Replicable: T8/G13...

Place of Origin:CHINA

Brand Name:GOIN

Model Number:7*1W /7*2W Bean pot light | G-DL-BP-7/14W

7W/14W LED bean pot downlight, high lumen output, adopt Cree, Taiwan High power LED chips, dimmable from 3%-100%, compatiable with Leading edge dimmers, trailing edge dimmers and universal dimmers. Product Parameters: Rated Wattage：8W/15W Lampholder：...