glow wire test apparatus iec60695 2 10

Brand Name:vouch

Model Number:5112

Place of Origin:CHINA

... device is designed to carry out fire hazard testing on electrotechnical products in accordance with the provisions of International standards. 2.The control unit is supplied with all the controls and metering necessary to accurately set the temperature of

Brand Name:Sinuo

Model Number:SN772A

Place of Origin:China

...-2-10, IEC60695-2-11, IEC60695-2-12 IEC60695-2-13. It also conforms to the standard requirement of UL746A. This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a

Brand Name:PEGO

Model Number:ZRS-2

Place of Origin:China

IEC60695-2-10 High Precision Electrical Safety Test Equipment 1000℃ Glow Wire Test Apparatus 1. Introduction The glow wire test apparatus is designed according to IEC60695-2-10, UL746 and GB/T5169.10. The specific material and sharp heating wire is heated to specific temperature (550 ℃~960 ℃) for 1 min by max current, then vertical burns the EUT with certain pressure (1.0N) for 30s, then check if the test...

Place of Origin:China

Brand Name:HongCe

Model Number:GW-1

...Glow Wire Test Apparatus With Chamber IEC60695-2-10 Product details: This device is manufactured according to the standard of IEC60695-2-10, IEC60695-2-13. It also conforms to the standard requirement of UL746A. This device simulates the thermal stress test of glowing...

Brand Name:KINGPO

...standard of IEC60695-2-10, IEC60695-2-13. It also conforms to the standard requirement of UL746A. This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in s short time.

Brand Name:Kinte

Model Number:WH-8901JK

Place of Origin:Guangdong,China (Mainland)

IEC60695 Flammability Test Equipment 0.5M3 Glow Wire Test Apparatus ​ Glow wire test is IEC6 0695-2-10: 2000 ~ IEC6 0695-2-13: 2000 Glow Wire / Hot Wire, Basic Test Method, Glow-wire Test Device and General Test Procedure and UL 746A, IEC829 DIN695, VDE0471 The use of non-flame ignition source program simulation test project. Glow wire tester will specify the material (4Ni80 / Cr20) and the shape of the heating wire...

Brand Name:Sinuo

Model Number:SN772

Place of Origin:China

...Glow Wire Test Apparatus For Electric Vehicle Components Complied Standards & Clauses IEC60695-2-10 “Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure” IEC 60695-2-11 “Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)” IEC 60695-2-12 “Fire hazard testing - Part 2-12: Glowing/hot-wire

Brand Name:GESTER

Model Number:GT-MC35H-1

Place of Origin:China

...-screen controller and instrument. New test circuit, stable performance, reliable, simple and easy to operate. wide range of parameter adjustment. The Glow Wire Tester is apply to the latest test standards IEC60695,GB5169, etc. Glow wire test Standards:

Brand Name:YUYANG

Model Number:YY081

Place of Origin:China

Glow Wire Testing Instrument/IEC 60695-2-10 Glow Wire Test Apparatus Glow Wire Tester Introduction Glow wire tester is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A ,GB/T5169.10,GB4706.1.It makes required material(Ni80/Cr20) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test...

Brand Name:SHC

Model Number:SC-GW01

Place of Origin:China

...the testing temperature of 550 ℃ ～ 960 ℃ for 1 min by using the glow wire tester with large current. Then using required pressure (1.0N) vertically burns the test sample for 30s. By observing whether the test sample and bedding object ignite or the

Brand Name:kingpo

Model Number:KP-GWT01

Place of Origin:china

Glow Wire Tester , glow wire tester without test chamber , IEC 60695-2-10 Glow Wire Tester Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A .It makes required material(＞77%Ni/20±1%Cr) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test...

Brand Name:DAXIAN

Model Number:DX8383

Place of Origin:China

...test machine for solid insulating materials Summary: The electrical dielectric strength tester is suitable for testing the breakdown strength and withstand voltage of dielectric, such as plastic, film, resin, mica, ceramic, glass, insulating paint and other media at power frequency voltage. Standards: GB/T5169.10,GB/T5169.13-2006 IEC60695-2-10:Fire hazard testing- Part2-10: Glowing/hot wire testing Machine- Glow-wire apparatus

Place of Origin:China

Brand Name:Julixing

...: Glow Wire Test Instrument is according to IEC60695-2-1, IEC60695-2-13 (GB/T5169.10-2006~GB/T5169.13-2006), and UL746A, IEC829, DIN695, VDE0471, the glow wire Test Instrument CX-Z17 is suitable for resistance to abnormal heat and fire test on ...

Model Number:LR-K002

Place of Origin:China

Brand Name:Lonroy

IEC 60695 Glow Wire Test Machine Test Fire Hazard of Electronic Products 1. Test Standard IEC60695-2-10/11/12/13 <Test Methods for Fire hazard of Electrical and Electronic Products IEC60884-1-2002 "Plug and Socket for Household and Similar Purposes&...

Brand Name:LIYI

Model Number:ZRS

Place of Origin:Dongguan

IEC60695 Electronic Glow Wire Test Equipment/ Plastic Testing Machine Basic introduction: 1. glow wire test apparatus Accord with IEC60695-2-10, UL 746A, GB/T5169.10, GB4706.1 2. glow wire test apparatus Using electricity heating regulation material (Ni80 / Cr20) of resistanse wire (Φ 4 mm Ni-Cr alloy wire) to 0°C~ 1000°C in 1 min,then with 1.0 N vertically burn it 30s,measure the fire risk by product light-off or holde burning time ,also test

Brand Name:TONY

Model Number:HTE-007A

Place of Origin:China

Glow Wire Testing Chamber comply with IEC60695-2-10 -13:IEC 60335-1,IEC 60598-1 and IEC60745 Features: 1.0 They system comply with standards of IEC60695-2-10 :2013 ～ IEC60695-2-13 :2013,IEC 60335-1,IEC 60598-1 and IEC60745. 2.0 Glow wire material: Ni/Cr wire with 4 mm diameter 3.0 Temperature range: 50 ℃ ～ 960 ℃ 4.0 Current range: 0-200 Ampere 5.0 Input power: 220V/50Hz 6.0 Including thermocouple and 1℃ resolution display to monitor the wire

Brand Name:SKYLINE

Model Number:SL-E04

Place of Origin:CHINA

...Test Equipment IEC60695-5-10 Glow Wire Testing Equipment Application • The Glow Wire Tester is designed to carry out fire hazard testing on electro technical products in accordance with the provisions of International standards. • The control unit is supplied with all the controls and metering necessary to accurately set the temperature of the glow wire. The wire...

Brand Name:ZL

Model Number:ZL-3029

Place of Origin:CHINA

Glow Wire Test Chamber For Electrician And Electronics Fire Hazard Testing Of Products Application: The device is designed and manufactured according to the requirements of "glow-wire test method" in IEC60695-2-10: 2000, GB / T5169.10-2006, GB / T5169.13-2006 and GB4706.1 standards. It is suitable for electrician and electronics Fire hazard testing...

Place of Origin:China

Brand Name:KeRang

Glow Wire Tester GW-1 Standard:IEC60695-2-10, IEC60695-2-13 and UL746A. Application:This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is suitable for electric and electronic products, household appliances and other material to do fire hazard testing. It is also used in the No flame ignition source fire test to test...

Brand Name:TST

Model Number:TS-100A

Place of Origin:Shanghai

...Glow Wire Testing Machine Contact: Mandy Skype: +86 155 8413 3985 WhatsApp:+86 155 8413 3985 Product Description 1. Glow wire tester Accord with IEC60695-2-10, UL 746A, GB/T5169.10, GB4706.1 2. Glow wire tester Using electricity heating regulation material (Ni80 / Cr20) of resistanse wire (Φ 3. Lab glow wire...