heat flux fire testing equipment

Brand Name:YUYANG

Model Number:YY401

Place of Origin:China

...exposed to a flaming ignition source in a graded radiant heat environment, within a test chamber. It can also be used to measure this same critical radiant flux for exposed attic floor cellulose insulation.Suitable for all kinds of flooring materials. Such

Brand Name:DAXIAN

Model Number:DX8401

Place of Origin:China

... burning behaviour and spread of flame of horizontally mounted floorings exposed to a heat flux radiant gradient in a test chamber, when ignited with pilot flames. Standard: - GB/T11785-2005 - ISO 9239-1,2 - ASTM E970 - NFPA253 -GBT11785-2005 Test Chamber:

Brand Name:SKYLINE

Model Number:SL-FL086

Place of Origin:China

...Panel Apparatus Application Critical Radiant Flux is the main parameters of the fire risk for flooring materials, it reflects the burning and spreading ability of flooring material specimen under external heat radiation conditions. It is an important index...

Brand Name:HOOHA

Place of Origin:China

...test method is used to measure the critical radiant flux of horizontally-mounted floor covering systems exposed to a flaming ignition source in a graded radiant heat environment, within a test chamber. It can also be used to measure this same critical radiant flux for exposed attic floor cellulose insulation. The European Union is using this test method for fire...

Brand Name:AI

Model Number:FRP-T

Place of Origin:CHINA

... by radiant heat ASTM E 648: Critical Radiant Flux of Floor standard test - covering system uses radiant heat energy ASTM E 970: Using a Radiant Heat Energy Source, test insulation floorinsulationinsulation standard test for Critical Radiant Flux using a

Brand Name:Delta

Model Number:CCT

Place of Origin:China

...Fire Test Equipment Heat Release Rate Cone Calorimeter Introduction: The CCT Release Rate Cone Calorimeter is designed and manufactured according to international standards and mainly for building products and electric cable testing. The analysis cabinet of our CCT Release Rate Cone Calorimeter can be moved, it can be used for cone calorimeter test, andCCT Release Rate Cone Calorimeter can also be used in the large heat release rate test

Place of Origin:China

Brand Name:CHENGFENG

...rate of specimens exposed in the horizontal orientation to controlled levels of irradiance with an external igniter. The heat release rate is determined by measurement of the oxygen consumption derived from the oxygen concentration and the flow rate in the

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

... tool. It is designed to meticulously evaluate the performance of various materials, products, and structures when exposed to the extreme conditions of fire. This equipment plays a vital role in industries such as construction, automotive, aerospace, and

Brand Name:GAOXIN

Model Number:GX-6053-L

Place of Origin:CHINA

...Fire Testing Equipment for Electric Cars Battery Pack Product description: Battery pack external fire test machine for battery flammability test, according to SJ / T11169, SJ / T11170, Ul1642, UL2054 test standards. Battery pack external fire test machine battery tray run to the top of the fire, the fire rose to the main limit, the high fire...

Brand Name:HJ

Model Number:NF-2

Place of Origin:China

... by HJ Company, specially designed to evaluate the fire hazards of electronic appliances, insulation materials and other products. With precise flame simulation technology as the core, combined with intelligent control and humanized ...

Brand Name:HAIDA

Model Number:HD-H209

Place of Origin:Guangdong, China (Mainland)

... mesh on the round hole, place the battery on the wire mesh screen, install an octagonal aluminum mesh around the sample, and then ignite the burner heats the sample until the battery explodes or the battery burns, and the

Brand Name:GOLD

Model Number:GD-FMVSS302

Place of Origin:China

...Fire Testing Equipment FMVSS 302 Introduction: FMVSS 302 is a test specification for the flammability of automotive interior materials in the U.S. Federal Motor Vehicle Safety Standards. It is designed to evaluate the combustion characteristics of vehicle interior materials when exposed to flames to reduce the risk of vehicle fires and slow the spread of fire...

Brand Name:HongCe

Model Number:PI-1

Place of Origin:China

Heat Insulated IEC Test Equipment Equipped With K - Type Electric Heater Product information: 1. This Plug set heat insulation tester is according to the standards of IEC60884-1 figure 40. 2. It is used for testing the improper heating resistance and burning resistance of bolt and plug with insulation sleeve. 3. It is able to imitate the insulated parts of which the plug-and-socket device’s safety performance may be damaged by electric heat

Brand Name:ZL

Model Number:ZL-9028

Place of Origin:China

... of laminated films. MRE(Meal Ready to Eat) Packaging Heat Seal Strength Tester conforms to standards of ASTM F2029. MRE(Meal Ready to Eat) Packaging Heat Seal Strength Tester has below features: 1. Mechanical-electrical integration of control system 2.

Brand Name:Sinuo

Model Number:SN773

Place of Origin:China

...arrangement and guidance” Equipment Overview Samples and Restrictions: Lighting equipment, low-voltage apparatus, household appliance, machine tool electric appliance, electrical machine, electric tool, electronic instrument, ...

Brand Name:Haida

Model Number:HD-H209

Place of Origin:China

... mesh on the round hole, place the battery on the wire mesh screen, install an octagonal aluminum mesh around the sample, and then ignite the burner heats the sample until the battery explodes or the battery burns, and the

Brand Name:Btutest

Model Number:MK-GX20A

Place of Origin:Made in China

Retort Kit Oil Water External Heating Drilling Fluids Testing Equipment Operating principle: The known volume of water-based drilling fluid sample is heated in the distiller to evaporate and condense its liquid phase components and then collected in the ...

Brand Name:VOUCH

Model Number:6810

Place of Origin:CHINA

...fire testing. Heat release is the key measurement required to assess the fire development of materials and products. Traditionally it has been very difficult to measure and more recently full scale testing of items (e.g. furniture) has been possible by burning these articles and measuring the evolved heat...

Brand Name:SHC

Model Number:SC-FNR40

Place of Origin:China

...Plug set heat insulation tester iec test equipment Abnormal Heat Resistant Insulating Sheath Test Device Figure40 IEC60884 Product details: This device meets the standards of IEC60884-1 figure 40. It is applicable to test improper heating resistance and ...

Brand Name:HTI

Model Number:HTB-034

Place of Origin:Guangdong,China(Mainland)

Professional ASTM D3638-92 DIN 53480 Low Voltage Tracking Testing Equipment Description: ASTM D3638-92 low voltage tracking tester simulates wet/moisture condition, test tracking index(CTI) and anti tracking index(PTI). It is used for electrical electronic...