hot wire ignition tester

Brand Name:KINGPO

Place of Origin:Mainland China

... of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors. The

Brand Name:YUYANG

Model Number:YYF050

Place of Origin:China

...Hot Wire Ignition Test Apparatus Hot wire ignition tester Application: It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time.Hot-wire coil ignition...

Place of Origin:China

Brand Name:HongCe

Model Number:HWI-1

...Hot Wire Ignition Tester , HWI Test Equipment Product information: This tester conforms to the standard requirement of IEC60695-2-20. It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time. Hot-wire coil ignition...

Brand Name:HJ

Model Number:HWI-1

Place of Origin:China

...Hot wire ignition tester With Electrical control Standard: IEC60950-1 Information technology equipment – Safety – Part 1: General requirements Annex A.4 Hot wire ignition test; IEC60947-1 Low-voltage switchgear and controlgear –Part 1: General rules Annex M M.1 Hot wire ignition test (HWI); IEC60695-2-20 Fire hazard testing — Part 2: Glowing/Hot wire based test methods — Section 20: Hot-wire...

Brand Name:Haida

Model Number:6004-HD

Place of Origin:China

Hot-Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-annealed at a defined power (0.26W/mm) and duration (8-12 seconds). The wire is wound in five full turns around the sample at a 6mm pitch, then tested at the same power (0.26W/mm) until ignition

Place of Origin:China

Brand Name:KeRang

... test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time. Test sample:Information technology ...

Brand Name:VOUCH

Model Number:5114

Place of Origin:CHINA

... test, combustibility test of electronic industry, home electronic appliance and materials. The glow wire apparatus and common test procedure is to simulate the effect of thermal stressed witch may be produced by heat sources such as glowing elements or

Model Number:FGW

...wire ignition tester,safety test equipment Model FGW: Glow wire ignition tester,safety test equipment Glow wire ignition tester,safety test equipment is designed to test the resistance to fire of insulating parts. It assesses the susceptibility of electrical insulating materials to ignition as a result of exposure to a glowing wire.This test method determines the minimum temperature required to ignite...

Brand Name:SHC

Model Number:SC-HWI

Place of Origin:China

... holder distance 250mm Specimen holder distance and height 70mm,height:60mm (the distance between the holder surface to the tray surface) Wire wrapping tension and its distance 5.4N±0.05N, 6.35mm±0.

Brand Name:Kingpo

Model Number:KP-FT3540

Place of Origin:China

...hot surface ignition temperature tester determines the lowest temperature at which A2L refrigerant can be ignited by a high-temperature hot surface under specific conditions; this is known as the hot surface auto-ignition temperature. This data is crucial for assessing the potential fire risk when refrigerant leaks and encounters hot...

Brand Name:PEGO GROUP

Model Number:HW-1

Place of Origin:China

...Hot Wire Ignition Test Apparatus /Fire Hazard Testing Equipment 1. Introduction The hot wire ignition test apparatus is designed according to the standards of IEC60950, IEC60695-2-20, UL60950, ASTMD3874 and etc.. The hot wire ignition test uses a heating wire of a specific size (Φ0.5 mm* 250 mm) and a specific material (Ni80/Cr20), after pre-annealing with specified heating power (0.26W/mm) and the specified time (8s~12s), the hot

Brand Name:Sinuo

Model Number:SN778

Place of Origin:China

IEC 60695-2-20 Hot Wire Ignition Coil Test Method Apparatus Complied Standards & Clauses IEC60695-2-20 “Fire hazard testing - Part 2: Glowing/Hot wire based test methods - Section 20: Hot-wire coil ignitability test on materials” Equipment Overview ...

Brand Name:HOOHA

Model Number:ZY6055

Place of Origin:China

... within the device may be ignited by a hot wire or a hot element. Under certain conditions, such as the failure current, component overload, and adverse contact of the conductor, some elements will reach a certain temperature and ignite the parts nearby.

Brand Name:GESTER

Model Number:GT-MC38

Place of Origin:China

Hot Wire Ignition Tester Product Introduction Standards: IEC60950, GB4943, IEC 60477-1 clause 5.2.5.4 Feature Programmable control system Precision adjustable power supply Imported aluminum fixture Equipped with test ventilation device One-button timing ...

Brand Name:HOOHA

Model Number:ZY6055

Place of Origin:Guangdong

... within the device may be ignited by a hot wire or a hot element. Under certain conditions, such as the failure current, component overload, and adverse contact of the conductor, some elements will reach a certain temperature and ignite the parts nearby.

Brand Name:JINHAIHU

Model Number:ZRS-2

Place of Origin:BEIJING, CHINA

...Hot wire tester Scope of application The heating wire tester heats the specified material (Ni80/Cr20) and the shape of the heating wire (Φ4mm nickel-chromium wire) to the test temperature (550℃~960℃) 1 min, then sets the pressure (0.95±0.1 N)30 s of vertical burning samples. To determine the ignition...

Brand Name:AI

Model Number:AIC-695220

Place of Origin:China

... The hot wire ignition test chamber is designed according to IEC 60695-2-20 and GB 4943 standards and conforms to the standard hot wire ignition test method. This hot wire ignition test chamber is mainly used for testing the hot wire ignition hazard...

Brand Name:JIEDONG

Model Number:JD-3051

Place of Origin:Guangdong, China

...-shaped burner of a specified size (Φ0.9mm), and uses a specific gas (butane) to ignite the sample at a 45° angle to see if the sample is ignited and burned. And the length of the burn to assess the fire risk of small flames inside the equipment due to

Brand Name:Lonroy

Model Number:LRX-3

Place of Origin:China

Thermal Conductivity Analyzer (Hot Wire Method) Hot-Wire Thermal Property Tester 1.Description: The LRX-3 thermal conductivity tester employs the transient hot wire method, including the cross-line method and the parallel-line method. It mainly measures...

Brand Name:INFINITY

Model Number:IC1362

Place of Origin:MADE IN CHINA

...reliable testing tool designed to measure the durability and strength of wires and cables. It is essential for quality control and product testing in industries such as electronics, automotive, and aerospace. Power Supply The Wire Pull Tester comes with a