iec 60332 heat release rate tester

Brand Name:GOLD

Model Number:GD-IEC60332Y

Place of Origin:China

IEC 60332 Bunched Cable Vertical Combustion Tester Product Description: The Bunched Cable Vertical Combustion Tester is a device designed for testing the vertical flame propagation performance of vertically installed bundled wires or cables under flame ...

Brand Name:SKYLINE

Model Number:SL833

Place of Origin:China

...Heat Release Rate Tester Stainless Steel Combustion Test Chamber OSU Heat Release Rate Tester.pdf Product information The OSU heat release rate tester approved by FAA of the Federal Aviation Administration of the United States was originally designed by Smith of Ohio State University in 1972, and later became a FAA designated combustion test instrument for testing the heat release rate...

Brand Name:DAXIAN

Model Number:DX8368B

Place of Origin:China

China ASTM E 1537 Heat Release Rate Tester/Large Calorimeter Scope of application: 10MW Heat Release Rate Tester applicable to buildings and large complexes (including locomotives, vehicles, furniture, warehouses and construction methods), as well as ...

Brand Name:HOOHA

Model Number:ZY6264

Place of Origin:China

ZY6264 10MW heat release rate test device 1.Scope of application: Applicable to buildings and large complexes (including locomotive vehicles, vehicles, warehouses and components) and extensive fire resistance test verification for raw materials, buildings...

Brand Name:AI

Model Number:MOSU

Place of Origin:CHINA

Rate of Heat Release (OSU) Tester Introduction: The OSU heat release rate tester, originally designed by Smith of Ohio State University in 1972, became FAA's designated combustion tester. The test standards are FAR Part 25 Appendix F Part IV, Airbus AITM 2.0006, Boeing BSS 7322 and ASTM E906. The Heat Release Rate (OSU) test is used by the aerospace/aviation industry to determine the heat release rate...

Brand Name:YUYANG

Model Number:YY501

Place of Origin:China

Building Material Heat Release Rate Flammability Testing Machine / Cone Calorimeter Application: Combustion product stream through the oxygen concentration of the oxygen consumption and calculate the heat release rate, heat release rate of the material is ...

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

... stands as a technological marvel. This sophisticated electronic machine tester is the cornerstone for accurately assessing the flammability and heat release characteristics of a vast array of materials, from building components to consumer products. 1.

Brand Name:lixian

Model Number:HZ-Building Material Fire Tester-4

Place of Origin:CHINA

...performance standards, room corner combustion tester control platform to provide independent gas analysis, including heat release rate and other related test required for related instruments, such as paramagnetic oxygen sensor, CO2/CO measuring instrument,

Brand Name:Delta

Model Number:IMO

Place of Origin:China

...Tester Introduction: IMO Imo Resolution Spread of Flame Tester is used to evaluate combustion characteristics of building materials and ship materials and measures spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release...

Brand Name:CHINT

Model Number:CU/XLPE/PVC POWER CABLE

Place of Origin:CHINA

...60332-3-24 Flame Retardant Cat. C Technical data Rated voltage: 0.6/1kV Maximum Conductor Temperature: under normal (90 ℃), emergency (130℃) or short circuit no more than 5 s (250℃) conditions. Min. Ambient Temp.: The cable shall be pre heated if the

Brand Name:CHENGFENG

Place of Origin:China

CF8348A cone calorimeter Used for predicting fire hazards and flame retardant prevention The scope of use: The oxygen consumption calculated by the oxygen concentration in the gas flow of the combustion product and the heat release rate of the combustion ...

Brand Name:DONGJIAXIN

Model Number:YJV, YJV22

Place of Origin:CHINA

...IEC 60502 3×300 1. Core Conductor: annealed copper (stranded core) 2. Popular sizes: 1,3core x 25~630mm² 3. Cable conductor: stranded annealed copper 4. Insulation: XLPE 5. Jacket:PVC 6. Steel Tape or Steel Wire Armord 6. Other specs: a)Temperature rating: -25C up to +90℃ b). Fire performance: IEC 60332-1 c). Approval: QS in China d). Voltage suitable: 6~30kV Advantages Heat

Brand Name:KUNCAN

Model Number:KC-8P

Place of Origin:China

... copper (7/0.2mm strands per core) Insulation PVC-free thermoplastic elastomer (TPE) for flexibility and heat resistance Jacket Material Oil-resistant, flame-retardant composite (IEC 60332-1 compliant) Voltage Rating 300V AC/DC Temperature Range -40°C to