iec 60335 2 rigid finger test probe

Brand Name:Sinuo

Model Number:SN2210-7T

Place of Origin:China

IEC 60335-2 Rigid Finger Test Probe 11 With Force 50N Product Information For Rigid Finger Test Probe 11: This rigid finger probe conforms to the standard requirement of IEC IEC60335-2-6 clause 22, IEC60335-2-9 clause 22, IEC61032 figure 7 device 11, ...

Place of Origin:China

Brand Name:Julixing

...) and is used to simulate a human finger. It is also used by the standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. The Rigid Test Finger was made on stainless steel and

Brand Name:ALLIED TESTING

Model Number:TP11

... to dangerous parts and to assess the mechanicalresistance of openings in the enclosure or inner separations. rigid test probe is made of high-grade steel in accordance with the standards and conforms the measures of the flexible finger probe picture 2,

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:CHINA

Thrust Rest Finger Test Finger Rigid Test Finger Test Probe Uses Protection test straight finger 50N thrust test finger Used to test the body to prevent touching parts, can also be used to check the hole of the outer casing or the inner baffle of the outer...

Brand Name:KingPo

Place of Origin:China

... Probe Meets Requirements for Testing Standard(s) including but not limited to:IEC 60950 EN 60950 UL 60950 CSA 950. Hot Tags: iec 60335 test finger probe, China, manufacturers, suppliers, factory, custom, wholesale, IEC60065:2014 Hi-pot (Voltage Withstand)

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I99

Test Finger Probe , IEC 60335 Testing Probe Kit With Carrying Case Product information: 1.IEC Jointed Finger Probe 2.50mm Impact Test Ball 3.Test Pin Probe: short 4.Rigid Finger Probe 5.Ball Pressure Tester 6.Telecom Test Probe Meets Requirements for Testing Standard(s) including but not limited to:IEC...

Brand Name:Lonroy

Place of Origin:China

IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Introduction 1. Reference to the standards IEC61032 IEC60335 IEC60065 2. It use for testing the electric products, to test safety of it. With the 50N force to press the probe instead the finger to measure electrical safety. IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Technical specification Test...

Brand Name:kingpo

Model Number:IEC60335-1- clause 20.2.

Place of Origin:china

... with circular stop face Φ 50 mm 1.Knurled Finger Diameter:12mm 2.Knurled Finger Length:80mm 3.Baffle Plate Diameter:50mm 4.Baffle Plate Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1.

Brand Name:HJ

Model Number:HT-I22

Place of Origin:China

IEC 60335 Test Finger Probe Test Finger Nail With 80 Probe length Standard: IEC 60335 ‘Household and similar electrical appliances - Safety - Part 1: General requirements’figure 7. Application: It is applicable for the non-removable components which are ...

Brand Name:PEGO

Model Number:PG-60335

Place of Origin:China

...Test Probe Kit Includes Standard Test Finger Long Pin Test Probe Test Probe 41 ect. The PG-60335 contains the probes listed in the core of the UL / IEC / EN 60335 requirements. The IEC60335 Test Probe includes the following probes: 1. Jointed Finger Probe Diameter of finger: 12mm Length of finger...

Brand Name:SHC

Model Number:SC-Kit 1

Place of Origin:China

IEC 60335 Standard Test Probe Kit Electric Safety Check Device List: IP1X Test Probe A IP2X The Standard Test Finger Probe IP3X Test Probe C IP4X Test Probe D IEC60335 Test Probe A Specification: IP1X Probe A /Test Probe A 1, According to: IEC61032:1997 /IEC60529:2001 and UL 2, IP1X Probe A (Test Probe A) is necessary appliance for household and similar electrical appliance of against electric shock protection test...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-B

... Technical Parameters: 1, Knurled Finger Diameter:12mm 2, Knurled Finger Length :80mm 3, Baffle Plate Diameter :50mm 4, Baffle Plate Length : 100mm 5According to :IEC60065, IEC 60335-1, IEC 60529, IEC60884-1, IEC60950, IEC61032, IEC69745-1 Application:

Brand Name:kerang

Model Number:HT-I22

Place of Origin:CHINA

Test Finger Nail HT-I22 Standard:IEC 60335 figure 7. Application:It is applicable for the non-removable components which are used for electric shocking water or touching the movement parts to see whether they can go through the mechanical stress that ...