iec 60529 1 test finger probe

Brand Name:KingPo

Place of Origin:China

... intended to verify the basic protectiion against access to hazardous parts. It’s also used to verify the protection against access with the back of the hand. Description: This probe is intended to verify protection the back of hand of persons against

Brand Name:HJ

Model Number:HT-I02T

Place of Origin:China

Test Finger Probe Access Probes of IEC 60529 Jointed Test Finger With 50N Force Standard: IEC 60529 Degrees of protection provided by enclosures (IP Code) Figure 1 – Jointed test finger. IEC 61032 Protection of persons and equipment by enclosures –Probes for verification Figure 2–Test probe B. And other standard such as IEC 60335-1, IEC60884-1, IEC 60598-1, IEC60065-1, IEC...

Place of Origin:China

Brand Name:Julixing

IEC 60529 Standard Test Finger Probe B with 10 ~ 30N Force Force Level: 10N, 20N, 30N 1. Conforms to: Standard IEC 61032-1997, IEC 60529-2001, GB/T4208-2008 and UL etc. 2. The Standard Test Knurled Finger Probe is the necessary appliance to prevent electric shock for household and similar electrical problem. Technical Parameters: Knurled Finger Diameter: 12mm Knurled Finger Length: 80mm Application: 1. The joint part of The Standard Test...

Brand Name:HongCe

Model Number:HT-I02T

Place of Origin:China

... provision to apply the force 0~ 75N with minimum resolution of 5N provided with banana pin at back side to check the continuity during the test. The standard test finger is intended to verify the basic protection against access to hazardous parts. It is

Model Number:TP18/19

... ) These size test fingers are to test for protection against access to hazardous parts with a human finger and / or arm. These are high precision probes made in exact accordance with IEC 61032, Figures 12 and 13. The child's finger is also called out

Brand Name:kingpo

Place of Origin:china

IEC 60529 Jointed test finger 12mm, IP2X Material: metal, except where otherwise specified linear dimensions in milimeters tolerance on dimensions without specific tolerance: on angles: 0/-10° on linear dimensions: up to 25mm: 0/-0.05 over 25mm: +/-0.2 bot...

Brand Name:PEGO

Model Number:PG-TPC

Place of Origin:China

IEC60529 Stainless Steel 2.5mm Test Rod for IP3 and suffix C code Test Introduction: The 2.5mm Test Rod is used to verify the protection of persons against access to hazardous parts. Also used to verify the protection against access with a tool. Test Rod ...

Brand Name:SHC

Model Number:SC-Kit 1

Place of Origin:China

IEC 60335 Standard Test Probe Kit Electric Safety Check Device List: IP1X Test Probe A IP2X The Standard Test Finger Probe IP3X Test Probe C IP4X Test Probe D IEC60335 Test Probe A Specification: IP1X Probe A /Test Probe A 1, According to: IEC61032:1997 /IEC60529:2001 and UL 2, IP1X Probe A (Test Probe A) is necessary appliance for household and similar electrical appliance of against electric shock protection test...

Brand Name:Lonroy

Place of Origin:China

... inspection to prevent direct contact of handheld tools.It can be customized with a 3 ± 0.3N pushing force. Standards Compliant with the requirements of IEC61032 Figure 2 test fixture C,

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

IEC 62196 Jointed Test Probe For Electric Vehicle Connector Test Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 10.1. Equipment Overview This is a precision test finger made in accordance with many standards like IEC 62196-1Ed.4CDV 2020 clause 10.1. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe

Brand Name:kerang

Model Number:HT-I02

Place of Origin:CHINA

... parts. It is also used to verify the protection against access with a finger. Test sample: Easily accessible enclosure live parts or mechanical parts. Feature: This test finger probe consists of dito, finger, base and insulated handle which simulates the

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

...Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts.The Rigid Test Finger was made on stainless steel and Polyamide handle. Applicatiopn 1.The joint part of The Standard Test

Place of Origin:China

Brand Name:BONAD

Model Number:BND-B

... Technical Parameters: 1, Knurled Finger Diameter:12mm 2, Knurled Finger Length :80mm 3, Baffle Plate Diameter :50mm 4, Baffle Plate Length : 100mm 5According to :IEC60065, IEC 60335-1, IEC 60529, IEC60884-1, IEC60950, IEC61032, IEC69745-1 Application:

Brand Name:Sinuo

Model Number:SN2210-2T

Place of Origin:China

... 60529 IP2X. It features an M6 threaded hole at the end of the handle, allowing it to be connected to a force gauge for precise testing applications. Technical parameters: Parameters /Model SN2210-2T Name Standard test probe with force Joint 1 30±0.2 (mm)

Brand Name:szcx

Model Number:CX-T2B

Place of Origin:china

Knurled Finger Diameter:12 mm Knurled Finger Length:80 mm Baffle Plate Diameter:50 mm Baffle Plate Length:100 mm Baffle thickness:20 mm Material:Stainless Steel. Handle:Nylon According to:IEC 61032, IEC 60335-1, IEC 60529-2001, IRAM 4220-1, SASO/IEC 60335...