iec 61032 bending test finger

Model Number:TP18/19

... ) These size test fingers are to test for protection against access to hazardous parts with a human finger and / or arm. These are high precision probes made in exact accordance with IEC 61032, Figures 12 and 13. The child's finger is also called out

Brand Name:JLX

Model Number:LX-1175

Place of Origin:Made in China

...Test Finger Probe of IRAM 4220-1 / IEC 61032 / IEC 60335 Rigid Test Finger Probe is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. Rigid Test Finger...

Brand Name:Lonroy

Place of Origin:China

IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Introduction 1. Reference to the standards IEC61032 IEC60335 IEC60065 2. It use for testing the electric products, to test safety of it. With the 50N force to press the probe instead the finger to measure electrical safety. IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Technical specification Test...

Brand Name:HongCe

Model Number:HT-I02T

Place of Origin:China

... provision to apply the force 0~ 75N with minimum resolution of 5N provided with banana pin at back side to check the continuity during the test. The standard test finger is intended to verify the basic protection against access to hazardous parts. It is

Brand Name:HJ

Model Number:HT-I02T

Place of Origin:China

Test Finger Probe Access Probes of IEC 60529 Jointed Test Finger With 50N Force Standard: IEC 60529 Degrees of protection provided by enclosures (IP Code) Figure 1 – Jointed test finger. IEC 61032 Protection of persons and equipment by enclosures –Probes for verification Figure 2–Test probe B. And other standard such as IEC 60335-1, IEC60884-1, IEC 60598-1, IEC60065-1, IEC...

Brand Name:KingPo

Place of Origin:China

EN 60529 IEC 60529 IP1X Test Finger Probe Sphere Diameter 50mm IEC60529 IP1X 50mm Sphere Test Probe This IEC 60529 IP1X 50mm Sphere Test Probe is also in accordance with IEC 61032 Figure 1. It is intended to verify the basic protectiion against access to ...

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

Product Description Complies with IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing...

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

IEC 62196 Jointed Test Probe For Electric Vehicle Connector Test Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 10.1. Equipment Overview This is a precision test finger made in accordance with many standards like IEC 62196-1Ed.4CDV 2020 clause 10.1. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger...

Brand Name:kingpo

Place of Origin:china

IEC 60529 Jointed test finger 12mm, IP2X Material: metal, except where otherwise specified linear dimensions in milimeters tolerance on dimensions without specific tolerance: on angles: 0/-10° on linear dimensions: up to 25mm: 0/-0.05 over 25mm: +/-0.2 bot...

Brand Name:SHC

Model Number:SC-F1218

Place of Origin:China

IEC 61032 Figure 12 Test Probe 18 Small Finger Probe Ф8.6 This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children of more than 36 months and less than 14 years. Probe Dimension: Parameters /Model Children’s finger probe SC-F1218 Hemispherical radius (mm) R4.3±0.05 Finger probe diameter (mm) Ф8.6±0.1 Finger

Brand Name:Sinuo

Model Number:SN2210-12

Place of Origin:China

Test Probe 18 Ф8.6mm Small Finger Probe For Simulate Children Finger IEC 61032 Figure 12 Product Overview: This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children of more than 36 months and less than 14 years. Features: IEC 61032 Figure 12 Test Probe 18, also known as Test Probe B or "Cylindrical Rigid Test

Brand Name:PEGO

Model Number:PG-TPB

Place of Origin:China

...IEC 61032 Test Probe B equipped with 42V Electrical Indicator 1. Introduction of IEC61032 Test Probe B: Test probe B ( jointed test finger) is design according to IEC61032 figure 2, meet the requirements of UL507, UL1278 figure 8 and EN60529 figure 2. Test probe B with 50N force is for IP2X testing, it means for the protection of person’s finger from hazard parts. 2. Specification of IEC61032 Test...

Brand Name:kerang

Model Number:HT-I02

Place of Origin:CHINA

... parts. It is also used to verify the protection against access with a finger. Test sample: Easily accessible enclosure live parts or mechanical parts. Feature: This test finger probe consists of dito, finger, base and insulated handle which simulates the

Brand Name:szcx

Model Number:CX-T2B

Place of Origin:china

...Finger Diameter:12 mm Knurled Finger Length:80 mm Baffle Plate Diameter:50 mm Baffle Plate Length:100 mm Baffle thickness:20 mm Material:Stainless Steel. Handle:Nylon According to:IEC 61032, IEC 60335-1, IEC 60529-2001, IRAM 4220-1, SASO/IEC 60335-1, SASO IEC 60950, IEC...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-B

... Technical Parameters: 1, Knurled Finger Diameter:12mm 2, Knurled Finger Length :80mm 3, Baffle Plate Diameter :50mm 4, Baffle Plate Length : 100mm 5According to :IEC60065, IEC 60335-1, IEC 60529, IEC60884-1, IEC60950, IEC61032, IEC69745-1 Application:

Brand Name:I-suntop

Model Number:GFK-90

Place of Origin:China

... Test Equipment: Optical Fiber Cable Repeated Bending Tester is used to determine the ability of a fiber optic cable to withstand repeated bending (cyclic flexing). Optical Fiber Cable Impact Tester Series allows a cable sample to be bent backwards and

Brand Name:Kinte

Model Number:WH-8801B

Place of Origin:Guangdong,China (Mainland)

... of electric wire. Test method is to sample fixed in the fixture, and add a certain load, test fixture swing around, after a certain number of times, view the break rate; or to not power, see the total number of swing. The machine can automatically count,

Brand Name:AI

Model Number:AIC-2002A

Place of Origin:China

...bending testing machine complies with the provisions of "General Safety Requirements for Cord Components and Power Cords" in relevant national standards such as UL817, VDE, CCC and IEC. It is applicable to bending test of power line and DC line of electrical products by relevant manufacturers and quality inspection departments. This swing test machine can test the bending...

Brand Name:ZL

Model Number:ZL-3424

Place of Origin:China

IEC 60335 - 2 Power Cord Bending Tester With Electric Driving and PLC Control Overview: The equipment is according to GB4706.15,IEC 60335-2-23:11.101 A specially designed and manufactured device for hair care fitted with a rotating connection Test the bending resistance of the appliance's power cord. Test...