iec 61347 1 test circuit

Brand Name:kingpo

Place of Origin:china

... compliance; through the tester current measurement, it can determine whether the test conditions meet the "standard". Test Methods 1.1. According to the IEC 61347-1:2012 standard, clause 14.6 a requires that the circuit be connected, as shown in

Brand Name:Sinuo

Model Number:SN9947

Place of Origin:China

IEC 61347-1 Thermal Protection Ballast Heating Test Chamber For Thermally Protected Ballasts Product information: Standard: IEC 61347-1 Annex C figure D.1, UL8750 figure 8.3, UL935 figure 25.1. This equipment is manufactured according to the requirements of IEC61347-1:2012 standard Appendix D for the test chamber for heating test of control devices of thermally protected lamps. Due to the requirements and limitations of the standard, this test

Brand Name:YUYANG

Model Number:YY613

Place of Origin:China

IEC 60331 Wire and Cable Fire-resistance Impact Testing Equipment Descriptions: Wire and Cable Fire-resistance Impact Tester is used to detect the fire resistance of cable wiring or power grid, burning in not less than 830 degrees, the flame, and exerts certain impact vibration, cable integrity test circuit. Standards: IEC 60331 Testing of wire and cable - circuit integrity under flame conditions IEC...

Brand Name:KingPo

Place of Origin:China

IEC 62133 Battery Short Circuit Tester With Automatic Shutdown Internal Forced Short-Circuit Tester Product information This battery forced internal short-circuit tester is an integral testing equipment to performance a comprehensive test for temperature, voltage, internal-short circuit, which is applicable for Lithium-ion battery cell safety test that complied with the Japan Industrial standard & relevant clause such as JISC 8714:2007 5.5 & IEC

Brand Name:PEGO Electronics

Model Number:PG-TPBT

Place of Origin:China

Blunt Probe as Per IEC60950, IEC60065 and IEC62368-1 for Testing TNT Circuit 1. Introduction The blunt probe is designed according to IEC60950 figure 2C, IEC60065 figure B1, IEC62151 figure 3, UL6500 figure B.1, IEC62368-1 figure V.3. It is applied to ...

Brand Name:HTI

Model Number:HTB-046

Place of Origin:Guangdong,China(Mainland)

... whether keep circuit integrity under fire conditions. Standards: GB/T19216 Test for electric or optical fibre cables under fire conditions---Circuit Integrity--Procedures and requirement for fire with shock--Cables of rated voltage up to and including 0

Brand Name:LCS

Model Number:LVD 2014/35/EU

Place of Origin:China

...IEC 62368) Some EU Portable Energy Storage Certification experimental methods: Overcharging of rechargeable battery pack. The battery pack is charged only to withstand any single fault condition that may occur in the charging circuit and can cause the battery pack to overcharge. To minimize the test...

Place of Origin:China

Brand Name:KeRang

Ultraviolet Testing Device UV340B Standard:Confirm to IEC60950 Safety of information technology equipment. Application:Measure the ultraviolet UVA and UVB large scale integrated circuit, reliable and durable 3 3/4 digits LCD display, maximum reading 3999, ...

Brand Name:ASLI

Place of Origin:Guangdong, China

Model Number:ES-10

Product Description Electromagnetic Vibration Table For Vibration Test adopted the 'double-magnetic circuit structure','self-generated skeleton action circles', 'Airborne Support' and 'roller bearings and linear guidance',&#...

Place of Origin:Shenzhen China

.... If the floodlight same with following conditions, they might be in one SAA and testing. 1. PCB Layout 2.Circuit Diagram 3. Structure of floodlight (Degree of protection IPXX) 4. Safety relatedcomponents 5. LED Driver (build-in or external driver) 6.

Brand Name:HongCe

Model Number:HC-DTZ04

Place of Origin:China

... delay, standard (long delay) operating characteristics test stand. Standard: IEC 60898-1 Electrical accessories - Circuit-breakers for overcurrent protectionfor household and similar installations -Part 1: Circuit-breakers for a.c. operation clause 8

Brand Name:Sinuo

Model Number:SN551-408L1000A

Place of Origin:China

IEC 62619 Short Circuit Testing EV Battery Testing Equipment 1000A Complied Standards & Clauses This Temperature-Controlled External Short Circuit Tester is specially designed for lithium battery safety performance testing. It strictly complies with major international standards including UL 1642, IEC 62133, UN38.3, IEC 62619, and IEC...

Brand Name:GAOXIN

Model Number:GX-6055-NT

Place of Origin:CHINA

...Circuit Battery Testing Equipment for IEC 62133 UN38.3 Requirements: Short-circuiting of the positive and negative terminals of the cell at ambient temperature shall not cause fire or explosion. Test Standard: IEC 62133-2012, UN38.3, UL 2054, UL 1642, IEC 62281-2004, IEC...

Brand Name:SKYLINE

Model Number:SL-7606Z

Place of Origin:China

IEC 60331 Cable Circuit Integrity Fire Resistance Tester Application The tester is designed according to GB/T 19216.11-2003/IEC 60331-11:1999 "Line integrity test of cables and optical cables under flame conditions Part 11: test apparatus - individual fire supply with flame temperature not lower than 750℃". It fully conforms to GB/T 19216.21-2003/IEC 60331-21:1999 "Line integrity test of cables and optical cables under flame conditions" Testing

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

IEC 60331 Cable Circuit Integrity Fire Resistance Testing Machine For Fire Safety And Regulatory Agencies In the field of electrical engineering and fire safety, the IEC 60331 Cable Circuit Integrity Fire Resistance Testing Machine is a crucial apparatus. It is designed to evaluate the ability of cables to maintain circuit...

Brand Name:HJ

Model Number:HJ0604

Place of Origin:China

IEC Test Equipment For Abrasion Resistance Test With Speed Of 20 ± 5mm/s Standard: IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ clause 21.2; IEC 60950-1 ‘Information technology equipment – Safety – Part 1: General requirements’ clause 2.10.8.4 and Figure 2K. Application: It is used for abrasion resistance test of printed circuit...

Brand Name:AI

Model Number:CFRTM

Place of Origin:CHINA

Circuit Integrity Under Fire Conditions Testing Equipment INTRODUCTION This cable fire resistance testing equipment to be used for testing cables required to maintain circuit integrity when subject to fire alone or fire with shock where the test condition is based upon flame with a controlled heat output corresponding to a temperature of at least 750˚C or fire with shock at a temperature of at least 830 °C. ​IEC 60331 Test...

Place of Origin:ZHEJIANG,CHINA

Brand Name:SHENGDI TECHNOLOGY

Model Number:HS6103F

... 1) The bench accords with the standard of “ IEC 60736:1982 testing equipment for electrical energy meters”, “IEC 62053” 2) The bench can be used to test single phase energy meter (up to 0.5 class), include 1P2W & 1P3W energy meter. It can be