iec 61851 23 torque tester

Brand Name:Sinuo

Model Number:SNQC1007B

Place of Origin:China

...Figure 111 and Table 114. Product overview The Cable Anchorage Pull Force and Torque Test Apparatus (Model SNQC1007B) is a professional testing solution designed in strict accordance with IEC 61851-23:2023 clause 11.6.102. It is specifically developed for

Brand Name:X

Model Number:C6

Place of Origin:CHINA

120kw electric bus DC charger The ultimate EV charging experience with DC fast charger Like all X DC charging stations, the C6 impresses with individual configuration options for the operator: the output power can be selected step by step up to 150 kW...

Brand Name:ARK or OEM

Model Number:EF040CJ030

Place of Origin:Jiangsu,China

CE Approved Commercial DC EV Charger 30KW 60KW EV Charging Station With CCS CHAdeMO Product Introduction ARK's EF040 DC charger is easy to install, own and operate. Able to charge all electric vehicles on the market, this charger is an economical solution...

Brand Name:Sinuo

Model Number:SN774

Place of Origin:China

IEC 61851-1 PLC Control System Leakage Tracking Test Equipment Product information: The tester is designed and manufactured according to the standard requirements of IEC60112, and required by IEC 61851-1 clause 12.3, IEC 61851-23 clause 11.6, IEC 62196-1Ed.4CDV 2020 clause 28.4, 29.6, IEC60335-1 clause 29.2 and Annex N, IEC 60065:2014 clause 13.4, IEC60598-1, IEC...

Brand Name:PEGO GROUP

Model Number:PG-PCT2

Place of Origin:China

... and torque tester is designed according to IEC62196-1 clause 25.3 figure 17 and IEC60309-1 clause 23.3, It is used to test tension and torque on the electric vehicle plug and vehicle connectors provided with a flexible cable, it shall not be possible to

Brand Name:HongCe

Model Number:HC9918

Place of Origin:China

... torque test to flexing cable of rewirable plugs and rewirable portable socket-outlets where they are connected to the terminals and that their covering is protected from abrasion. Test ...

Brand Name:HJ

Model Number:HC9918

Place of Origin:China

...Part 1: General requirements’ clause 23.2 Application: This device is used for testing the wear resistance ability of flexing cable with protective sheath of plug, portable socket-outlet, ...

Brand Name:KingPo

Place of Origin:China

Model Number:KP-LN9

... standards. It is use to perform tension and torque test on the power cord. It is used to test the strength of connections. Accordding to the standard IEC 60335-1 Clause 25.15 --“Appliances provided with a supply cord, and appliances intended to be

Brand Name:KINGPO

Place of Origin:China

Digital High Sensitive Torque Tester Product information: This torque tester is designed and manufactured for a variety of torque an intelligent measurement tester. Mainly used for measuring and testing a variety of electric screwdriver, pneumatic size ...

Brand Name:Precision Motive

Model Number:PWHD

Place of Origin:CHINA

Product Description: Hysteresis Dynamometer for Low and Medium Power Testing The AHD series of hysteresis dynamometers are versatile and perfect for testing applications that require low to medium power. These dynamometers are designed to measure the ...

Brand Name:SHC

Model Number:SC-NJ01

Place of Origin:China

IEC60884 Plug and Socket Outlet Torque Balance Test Apparatus Application: - Plug and Socket Torque Tester/Device is for compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus. - Plug Torque Tester/...

Place of Origin:China

Brand Name:KeRang

Socket-outlet Torque Balance SOB-1 Product information: The HT plug torque tester conforms to the standard of IEC60065 figure 11. It is used for checking whether the mechanical stress which occurs when the Direct Plug-in Equipment with plug pin normally ...

Brand Name:Neide

Model Number:ND-562

Place of Origin:China

70kPa HMI Altitude Battery Safety Test Chamber Smart Touchscreen Battery Short Circuit Tester -Prevent Battery Explosion at High Altitude: Smart Touchscreen Simulation Chamber Our altitude simulation chamber forces batteries to withstand 11.6kPa extreme ...

Brand Name:JLX

Model Number:LX-L1Y

Place of Origin:Made in China

... Specifications: For measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC 60065 clause15.4.1 and figure 11, IEC 60335-1 clause 22.3, IEC 60884-1 clause 14.23.2. The balancing arm of the test...

Brand Name:ZL

Model Number:ZL-3424

Place of Origin:China

IEC 60335 - 2 Power Cord Bending Tester With Electric Driving and PLC Control Overview: The equipment is according to GB4706.15,IEC 60335-2-23:11.101 A specially designed and manufactured device for hair care fitted with a rotating connection Test the ...

Brand Name:LABTONE

Model Number:SKT100

Place of Origin:CHINA

...Tester Machine For Consumer Electronics Product Impact Testing With IEC Standard Specifications Model SKT100 Table Size 70*80cm Max Specimen Weight 100kg Max Acceleration(Half Sine) 600G Pulse Duration(Half Sine) 30-1ms Machine Dimension 130*120*260cm Controller Cabinet Dimension W55*D50*H80(cm) Machine weight 3200kg Power Supply 3PH AC380v±10% 50Hz Certification ISO;CE Applicable Standards: GB/T2423-2008;GJB1217;GJB360.23...

Brand Name:ASLI

Model Number:MS-50

Place of Origin:China

..., MIL-STD-202F, IEC-68-2-27, MIL-STD-883E, MIL-STD-810F, ISTA, UL Shock testing systems Applications: aviation,aerospace,vessel,military industry,consumer electronics ,automobile,household appliances, display device etc Product Application Bump Tester is

Brand Name:ESTEL

Model Number:E3P-40K-D2-50A-EU01

Place of Origin:Shenzhen, China (Mainland)

... Product overview The DC charger is in compliance with IEC 61851-1:2017, EN 61851-1:2010, EN 61851-23:2014, EN 61851-24:2014, IEC 61851-21-2:2018, GB/T18487.1-2015, and the corresponding communication standards GB/T 27930-2015, GB/T 34657.1-2017, GB/T ...

Brand Name:SZC

Model Number:Type2-CCS2 Integrated Charger 42 kW

Place of Origin:Dongguan,China

.../4G Working Temperature: -30℃~+55℃ Protection Level: IP54 Cooling: Automatic forced-air cooling Standards: EN/IEC 61851-1: 2017, EN/IEC 61851-23: 2014 Enclosure: Galvanized steel Dimension:750*520*240 mm(H*W*D) Net Weight: 35 kG

Brand Name:SEELONG

Model Number:SLYD-160/3300

Place of Origin:China Luoyang

SLYD 160-250KW 3300rpm ±0.05%FS High Dynamic and High Torque Dynamometer Introduction to SLYD Series Dyno SLYD Electric dynamometer is different from eddy current dynamometer. The SLYD electric dynamometer can be used to test low-speed and high-torque ...