iec 62196 1 test apparatus

Brand Name:PEGO Group

Model Number:PG-ADC

Place of Origin:China

IEC 62196-1 Test Apparatus For Checking Damage To VE Conductors with 10Rpm 1. Introduction of apparatus for checking damage to VE conductors: The apparatus for checking damage to EV conductors is designed to meet the test requirements of IEC62196-1 clause 13.3 figure 12, IEC60884-1:2022 clause 12.2.5 and figure 13, IEC60669-1 clause 12.2.5 and figure 9, IEC62052-31 clause 6.9.7.3 (for flexion test). The apparatus...

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

IEC 62196 Jointed Test Probe For Electric Vehicle Connector Test Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 10.1. Equipment Overview This is a precision test finger made in accordance with many standards like IEC 62196-1Ed.4CDV 2020 clause 10.1. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test...

Brand Name:Sinuo

Model Number:SN11010

Place of Origin:China

IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc. Test

Brand Name:kingpo

Model Number:62198

Place of Origin:china

Product Description IEC 62196-1 Test Plug Gauge Of Vehicle Connector Withdrawal Force Test Die Steel Product Overview: The Test Plugs Are Required By IEC 62196-: 2022 Clause 14.1.5, 14.1.6, According To The Relevant Standard Sheets, Shall Have Finely ...

Model Number:LR-K004

Place of Origin:China

Brand Name:Lonroy

IEC 60335 Tracking Test Apparatus CTI Comparative Tracking Index Tester 1. Reference standard IEC60335, GB4706.1, IEC 6084-1, GB2099.1, GB/t4207-2003, IEC 60112. 2. Technical specifications This product is used for electrical products affected by damp and ...

Brand Name:HJ

Model Number:SH-0.2J

Place of Origin:China

... apparatus. And other standard such as IEC 60335-1, IEC60884-1, IEC 60598-1, IEC60065-1, IEC 62368-1 and etc. When is an impact test appropriate? An impact test is appropriate for equipment likely to be used in areas with non-restricted access and where

Brand Name:HongCe

Model Number:NF-2

Place of Origin:China

... wire test equipment, hot wire ignition test machine and etc.. The new version PLC control 7 inch needle-flame tester is designed and manufactured according to the standard requirement of IEC60695-...

Brand Name:DAXIAN

Model Number:DX8403

Place of Origin:China

... or round insulated cores at low temperature. The manual low-temperature impact test device is used to measure the samples of wire and cable insulation and jacket, plugs and sockets, insulating electrical sleeves and accessories for construction. After

Brand Name:KINGPO

Place of Origin:China

...Adjustable Bend Angle Product information: This test apparatus checks the protection of the supply cord where it enters the appliance. It conforms to the standard requirement of IEC60335-1 clause 25.14. Appliances provided with a ...

Brand Name:SKYLINE

Place of Origin:China

... of the plug-in device with plug-in pin on the socket during normal use is within the specified range. Compliance: It is suitable for testing the torque exerted on the output socket by the device which is to be inserted into the fixed output socket and is

Brand Name:SHC

Model Number:SC-NJ01

Place of Origin:China

IEC60884 Plug and Socket Outlet Torque Balance Test Apparatus Application: - Plug and Socket Torque Tester/Device is for compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus. - Plug Torque Tester/...

Brand Name:YUYANG

Model Number:SCV

Place of Origin:CHINA

... is a bench scale test to determine the resistance of a single cable to a 1kW flame application. It conforms to IEC60332-1-2 (flame propagation) and IEC60332-1-3 (test for flaming droplets). Standards: IEC 60332-1-1~3:2004 Features Stainless steel box, the

Brand Name:HEIU

Model Number:T1-T2

Place of Origin:China

... of 7.4 kW. This charging cable is ideal for all electric cars and plug-in hybrids, especially for charging at public charging stations. 2)All charging cables have been tested by us and have a

Brand Name:JLX

Model Number:LX-L1Y

Place of Origin:Made in China

... measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC 60065 clause15.4.1 and figure 11, IEC 60335-1 clause 22.3, IEC 60884-1 clause 14.23.2. The balancing arm of the test apparatus pivots...

Place of Origin:Shenzhen China

Brand Name:CB/GS/SAA

Model Number:CB/GS/SAA

..., commercial catering equipment, etc. b) SANS IEC 60065 - Safety of audio-visual equipment and similar electronic apparatus, eg. TV’s, VCR’s, Hifi’s, radios, etc. c) SANS IEC 61029 - Safety of transportable motor-operated electrical tools, eg.

Brand Name:AI

Model Number:CTA

Place of Origin:CHINA

... that released during combustion from cable or optical cable components material; The equipment is designed and produced on the basis IEC 60754. The cable material is processed by prius tube furnace, and then the pH value and conductivity of the gas that

Brand Name:ZL

Model Number:ZL-3425

Place of Origin:China

...: 16.5, IEC60598: 5.2.11 and other standard provisions. It is used to evaluate power cords, and it is intended to be permanently connected with flexible cords. Perform two tests of tension and torque at the terminals to power cables such as

Place of Origin:China

Brand Name:CHENGFENG

...Test Machine High-voltage Track Testing Equipment IEC60587 Standard : Tracking resistance tester Erosion resistance tester Electrical tracking test machine Insulation tracking tester High-voltage tracking test equipment Dielectric tracking tester Contamination tracking test apparatus Electrical erosion test machine Tracking and erosion test apparatus IEC 60587 test...

Brand Name:HOOHA

Model Number:ZY6056

Place of Origin:China

GB/T5169.10~ 13 Needle Flame Test Apparatus , IEC 60695 - 2 - 1 Electrical Testing Machine Scope of application: Needle flame test machine is suitable for lighting, low voltage electrical appliances, household appliances, machine tool electrical appliances...