iec 62196 jointed test finger

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

IEC 62196 Jointed Test Probe For Electric Vehicle Connector Test Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 10.1. Equipment Overview This is a precision test finger made in accordance with many standards like IEC 62196-1Ed.4CDV 2020 clause 10.1. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger...

Brand Name:HJ

Model Number:HT-I02T

Place of Origin:China

Test Finger Probe Access Probes of IEC 60529 Jointed Test Finger With 50N Force Standard: IEC 60529 Degrees of protection provided by enclosures (IP Code) Figure 1 – Jointed test finger. IEC 61032 Protection of persons and equipment by enclosures –Probes for verification Figure 2–Test probe B. And other standard such as IEC 60335-1, IEC60884-1, IEC 60598-1, IEC60065-1, IEC...

Brand Name:kingpo

Place of Origin:china

... on dimensions without specific tolerance: on angles: 0/-10° on linear dimensions: up to 25mm: 0/-0.05 over 25mm: +/-0.2 both joints shall permit movement in the same plane and the same direction through an angle of 90°with a 0 to +10° tolerance.

Brand Name:KingPo

Place of Origin:China

... standard. The IEC 60529 IP2X Jointed Test Finger Probe is intended to verify the basic protection against access to hazardous parts. It’s also used to verify the protection against access with a finger. Conforms to: This is the “international”

Model Number:TP18/19

...test finger probe,jointed test finger probe Model TP18 IEC 61032, Figures 12 Small Child test finger probe,jointed test finger probe ( 0 - 36 months ) Model TP19: IEC 61032, Figures 13 Small Child test finger probe,jointed test finger probee ( 3 - 14 years ) These size test fingers are to test for protection against access to hazardous parts with a human finger...

Place of Origin:China

Brand Name:Julixing

...Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts. The

Brand Name:Sinuo

Model Number:SN11010

Place of Origin:China

IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc. Test

Brand Name:HongCe

Model Number:HT-I02

Place of Origin:China

Test Finger Probe B HT-I02 Description: This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. Confirm to standards: IEC 60529 IP2X; EN 60529 IP2X; IEC 61032 Figure 2; IEC 60950 Figure 2A; IEC 60884-1; IEC 60335; UL507, UL1278 figure 8.4 and so on. Test sample: Easily accessible enclosure live parts or mechanical parts. Feature: This test

Brand Name:PEGO

Model Number:PG-TPB

Place of Origin:China

..., UL1278 figure 8 and EN60529 figure 2. The jointed test finger is intended to verify the basic protection against access to hazardous parts. It is used to verify the protection against access with finger. 2. Specification Jointed Test Finger: Diameter of

Brand Name:Lonroy

Place of Origin:China

IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Introduction 1. Reference to the standards IEC61032 IEC60335 IEC60065 2. It use for testing the electric products, to test safety of it. With the 50N force to press the probe instead the finger to measure electrical safety. IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Technical specification Test...

Brand Name:szcx

Model Number:CX-T2B

Place of Origin:china

Knurled Finger Diameter:12 mm Knurled Finger Length:80 mm Baffle Plate Diameter:50 mm Baffle Plate Length:100 mm Baffle thickness:20 mm Material:Stainless Steel. Handle:Nylon According to:IEC 61032, IEC 60335-1, IEC 60529-2001, IRAM 4220-1, SASO/IEC 60335...

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

...Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts.The Rigid Test Finger was made on stainless steel and Polyamide handle. Applicatiopn 1.The joint part of The Standard Test

Place of Origin:China

Brand Name:BONAD

Model Number:BND-B

... Technical Parameters: 1, Knurled Finger Diameter:12mm 2, Knurled Finger Length :80mm 3, Baffle Plate Diameter :50mm 4, Baffle Plate Length : 100mm 5According to :IEC60065, IEC 60335-1, IEC 60529, IEC60884-1, IEC60950, IEC61032, IEC69745-1 Application:

Brand Name:SHC

Model Number:SC-F1218

Place of Origin:China

IEC 61032 Figure 12 Test Probe 18 Small Finger Probe Ф8.6 This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children of more than 36 months and less than 14 years. Probe Dimension: Parameters /Model Children’s finger probe SC-F1218 Hemispherical radius (mm) R4.3±0.05 Finger probe diameter (mm) Ф8.6±0.1 Finger

Brand Name:kerang

Model Number:HT-I22

Place of Origin:CHINA

Test Finger Nail HT-I22 Standard:IEC 60335 figure 7. Application:It is applicable for the non-removable components which are used for electric shocking water or touching the movement parts to see whether they can go through the mechanical stress that happened in normal use. Thus to judge the components conform to the required protection grade or not. Test...

Brand Name:HEIU

Model Number:T1-T2

Place of Origin:China

... of 7.4 kW. This charging cable is ideal for all electric cars and plug-in hybrids, especially for charging at public charging stations. 2)All charging cables have been tested by us and have a

Brand Name:Hochiry

Model Number:Hochiry-PS-22KW

Place of Origin:CHINA

...IEC 62196 EV Type 2 Wallbox Electric Vehicle Charging Station Level 2, 240 volt electric vehicle (EV) charging station charges any EV up to 9X faster than a normal wall outlet, with flexible amperage settings up to 50 amps (16/24/32/40/48/50 Amp) and plug-in or hardwired installation. Use the ChargePoint app to pick the right amperage for your home after installation. Works with all electric cars, tested...

Brand Name:ANS

Model Number:ANSAG-T1-T2-32A

Place of Origin:China

Mode 3 Type 2 EV Charging Cable Electric Car Charger Plug in Hybrid Car EV Charging Cable Product Features The shell adopts riveting process without screws Ergonomic design concept Double-color design with customization The internal waterproof design has ...

Brand Name:HAOMAI

Model Number:NSA-60

Place of Origin:China

.... It is widely used in the field debugging, system joint debugging, fault maintenance and other occasions. Handheld IEC 61850 Analyzer NSA-60 is portable network analyzer with a 10.1” touch screen so that engineer can take it only to different places in

Brand Name:HUATEC

Model Number:HEF-301

Place of Origin:Beijing

...er fingers because it has less joints. HEF-301 takes this advantage to realize one-finger operation. Moreover, with the latest digital electronic technology and microcomputer technology, this instrument can offer not only extremely convenient operation,