iec320 socket power line emi filter

Brand Name:VIIP

Model Number:VIP1-1B

Place of Origin:China

94v-0 EMI Suppression Filter For Test Equipment Single Fuse Quick Detail: Item EMI Suppression Filter Model EMI Suppression Filter VIP1 Transfer Function Low Pass Package Type Surface Mount Nominal Center Frequency 150K-30MHZ Insertion Loss 60~90dB Input ...

Brand Name:YBX

Model Number:YB12T5-4A-W

Place of Origin:China

.../440V Rated Current 1~10A Environmental Temperature 40°C Temperature Range -25℃~+85℃ Operating Frequency 50/60HZ Line to Line 1450VDC Line to

Brand Name:BONENS

Model Number:DBI5-S

Place of Origin:Sichuan, China

...EMI Filter with dual fuse and switch IEC socket power filter 1A 3A 6A 10A PRODUCT NAME: DBI5-S series EMI power line noise filters 6A,1A,3A,10A With Fuse IEC socket type with safety switch power filter PRODUCT INTRODUCTION: The DBI5-S series EMI power line noise filter...

Brand Name:Yusheng

Model Number:PE2200-10-01

Place of Origin:CHINA

...Operating Frequency 50/60Hz Temperature range HPF 25/085/21 Test Voltage(1 min) Line to Ground :2000VAC Line to Line :1450VDC Description: EMI MEC filter, also known as electromagnetic interference filter, network filter, network noise filter and so on, or

Brand Name:Kinda

Model Number:KD

Place of Origin:China

...high frequency harmonic in power. Low leakage current with high insert lose of noise.Control EMI interference between line and line,line and ground. Can be applied to data processing systems, telecommunications systems, inverters and power purification. 1

Model Number:SF-v2

Place of Origin:Jiangsu, China

Brand Name:Nenglv

2 lines 1A emi signal filter for video rf shielding room 1. After years of efforts of the company's personnel, products successively obtained the cUL, TUV,CQC, CE, ROSH certifications. 2. We have a professional R&D team; our aims is we won't let customers ...

Brand Name:ZXY

Model Number:ZXY-CW1B-1A-L

Place of Origin:Huizhou.China

... electromagnetic interference (EMI) and radio-frequency interference (RFI) in single-phase AC power lines. It features integrated leads for easy installation, typically filtering noise in both differential-mode (line-to-line) and common-mode (line-to

Brand Name:VEIKONG

Model Number:VKS

Place of Origin:China

Emi filter 50A noise rfi mains electronical filters for VFD and converter EMI Power Line Filter from the LC low-pass passive network components.It uses principles of impedance mismatch,so that by the attenuation of electromagnetic interference signals. Filter filtering effect depends on the extent of impedance mismatch,the greater the impedance difference, the better the filter. For example,to get better results, for low-impedance power...

Brand Name:Shinhom

Model Number:LCHB Series

Place of Origin:China

...Power Inductor , High Current Dip Power Inductor Features: High frequency and low loss For excellent EMI suppressor Small profile Large current Low resistance SMT and low profile available RoHS compatible (Pb free) versions available Good frequency characteristic Application: Widely applied in various switching power suppliers and high frequency electronic equipment Power line filtering, EMI/RFI for switch mode power

Brand Name:VEIKONG

Model Number:VKS

Place of Origin:China

...attenuation of electromagnetic interference signals. Filter filtering effect depends on the extent of impedance mismatch,the greater the impedance difference, the better the filter. For example,to get better results, for low-impedance power supply side,

Brand Name:CHIFON

Model Number:ME920-16

Place of Origin:CHINA

...Filter EMI Filter VVVF Control VFD EMC Filter, also known as input filter and incoming line filter, is a kind of inverter-specific filter; it is mainly composed of (L) filter inductor, (C) filter capacitor and (R) resistor. It works on the principle of "impedance mismatch". It belongs to the RFI filter, which is used to reduce EMC interference and is used on the main power...

Brand Name:Shareway

Model Number:744842565

Place of Origin:Guangdong China

...Power Line Choke for emi Characteristics Core material: Nickel-Zinc Ferrite High suppression rates of asymmetrical interferences at high and middle frequencies High interference stability against RF interference and burst signals Compact design Noise suppression up to 300 MHz Operating temperature: –40 ºC to +125 ºC Applications Power electronics Power line in- and output filter...

Brand Name:Dowis

Model Number:CS234060

Place of Origin:CN

... switching power supplies to filter common mode electromagnetic interference signals. In the board design, the common mode inductor also acts as an EMI filter to suppress the electromagnetic radiation generated by the high-speed signal line from radiating...

Brand Name:FC

Model Number:EMC Filter

Place of Origin:China

Product Description Product Description Technical Data Rated Voltage 115/250VAC Line Frequency 50/60Hz Test Voltage 1150VDC(Line/Line) 1500VDC(line/Ground) Insulation Resistance >50MΩ@500VDC Temperature Rise <30ºC Climatic Category 25/085/21 If you need ...

Brand Name:XJSR

Model Number:Product Size: Encapsulation: Vertical Inductance value: 10-20mH Size(Length X height): 21mmx16.5mmx13mm Current: 5-10A Flat 10mh 8mh 100uh 80uh Common Mode Inductor Choke Filter Inductor 5

Place of Origin:Guangdong,shenzhen

Product Description: Common Mode Choke is a kind of common mode inductor, which is an important component for EMI filters. The inductor is designed to reduce electromagnetic interference (EMI) and noise generated by the electrical device. It provides high ...

Place of Origin:wuxi

Brand Name:HM

Model Number:KHZ

1. ELECTRONICAL SPECIFICATIONS A. CENTRE FREQUENCY(f.) : 455 KHz±1.0KHz.Max. B. BAND WIDTH AT 3dB : ±15 KHzMin(TO 390 KHz) C. BAND WIDTH AT 40dB : ±30 KHzMin(TO 390 KHz) D. STOP BAND ATTENUATION : 35dBMin(AT f0 ± 18 to ± 33KHz) E. STOP BAND ATTENUATION : ...

Model Number:LHR/LGS/LQH LHA/FLH Type

Place of Origin:Guangdong, China

Brand Name:Original

#detail_decorate_root .magic-0{border-bottom-style:none;border-bottom-color:113c6f;font-family:Verdana;font-size:24px;color:#fff;background-color:#113c6f;text-align:center;text-decoration:underline;font-style:normal;font-weight:bold;border-bottom-width:2px...

Brand Name:GA

Place of Origin:CHINA

Model Number:VARIOUS

...EMI Coil With Ferrite Toroids Magnet Wires EMI Filter. EMI filter (electromagnetic interference filter) also known as RFI filter, is an electronic passive device which is used in order to suppress conducted interference that is present on a signal or power line. ... EMI filters can be used to suppress interference that is generated by the device. High initial permeability ferrite toroids + Magnet wires for EMI filter of power

Brand Name:ESTEL

Model Number:1S32L30KN3D1-21E3G-2

Place of Origin:Shenzhen, China (Mainland)

...Power Distribution Unit with C13/C19 Outlets 1. Power Distribution Unit Product Specification Parameter Description: Customer name NO. Product specification parameter description Product name PDU 1 Socket system and number IEC320 C19 (3); IEC320 C13(21) Product specification and model 1S32L30KN3D1-21E3G-2 2 Internal connecting line 16AWG,14AWG,12AWG,copper Stick Product code 3 Power...

Brand Name:PRINTINGPLUS

Model Number:Filter

Place of Origin:CHINA

Filters To Reduce Electromagnetic Interference And Protect Equipment Safety What is a switch socket filter? A switch socket filter is a device that is integrated into an outlet to reduce electromagnetic interference in a power line. How it works: It protects connected devices from EMI by filtering out high-frequency noise and interference from the power supply. Applications: Single-phase power supply, switching power...