iec60243 1 fire hazard testing machine

Brand Name:DAXIAN

Model Number:DX8388

Place of Origin:China

Electrical Strength Test Machine for Solid Insulating Materials Summary: The electrical dielectric strength tester is suitable for testing the breakdown strength and withstand voltage of dielectric, such as plastic, film, resin, mica, ceramic, glass, ...

Brand Name:ZL

Model Number:ZL-3029

Place of Origin:CHINA

Glow Wire Test Chamber For Electrician And Electronics Fire Hazard Testing Of Products Application: The device is designed and manufactured according to the requirements of "glow-wire test method" in IEC60695-2-10: 2000, GB / T5169.10-2006, GB / ...

Brand Name:HongCe

Model Number:NF-2

Place of Origin:China

... wire test equipment, hot wire ignition test machine and etc.. The new version PLC control 7 inch needle-flame tester is designed and manufactured according to the standard requirement of IEC60695-11-5,...

Brand Name:PEGO

Model Number:PG-HVR

Place of Origin:China

...Testing Machine According to IEC60695-11-4 / 3 1. Introduction Horizontal and vertical flame test apparatus is applied to simulate the fire at the early stage surround the electric and electronics appliance, and then evaluate the degree of fire hazard. It is designed according to UL94, IEC60695-11-4 and IEC60695-11-3. The fire hazard...

Model Number:LR-K002

Place of Origin:China

Brand Name:Lonroy

IEC 60695 Glow Wire Test Machine Test Fire Hazard of Electronic Products 1. Test Standard IEC60695-2-10/11/12/13 <Test Methods for Fire hazard of Electrical and Electronic Products IEC60884-1-2002 "Plug and Socket for Household and Similar Purposes&...

Brand Name:Haida

Model Number:6004-HD

Place of Origin:China

Hot-Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-...

Brand Name:AI

Model Number:GWFI

Place of Origin:CHINA

...Test Machine Introduction: This Glow Wire Flammability Index Test Machine is designed according to IEC60695-2-10: 2000 standard "glowing filament test method". It is applicable to electrical and electronic products, household appliances and materials fire hazard testing...

Place of Origin:China

Brand Name:KeRang

Glow Wire Tester GW-1 Standard:IEC60695-2-10, IEC60695-2-13 and UL746A. Application:This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is ...

Brand Name:CHENGFENG

Model Number:CF8521

Place of Origin:China

Working principle: Due to fault conditions in the product, such as fault current flowing through the leakage path, overheating of components or parts, poor contact, etc., flames may be caused, which may then shoot onto nearby parts. The needle flame test ...

Brand Name:GC

Model Number:GC-ZY-A

Place of Origin:China

...Test Apparatus Model: GC-ZY-A A. Product Introduction The needle flame test machine is suitable for simulating small flames generated inside the product under fault conditions in electronic and electrical products, and uses simulation technology to evaluate the fire hazard...

Brand Name:Neide

Model Number:ND-562

Place of Origin:China

Dual-Wall Explosion Containment Chamber UL 9540A Certified Solid-State Battery Fire Suppression Safely conducts overcharge/over-discharge testing by isolating batteries within a sealed explosion-proof enclosure, while connected to external testing ...

Brand Name:KINGPO

Model Number:NF-1

Place of Origin:Mainland China

...Test Equipment Needle Flame Tester Product Introduction The test machine is designed and manufactured according to the requirements of the relevant standards IEC60695-11-5, the needle-flame tester is the special instrument used for the fire hazard test of the small flame caused by the fault conditions in the simulating technology assessment equipment. It is applicable to the measurement of the fire hazard...

Brand Name:Sinuo

Model Number:SN773

Place of Origin:China

...arrangement and guidance” Equipment Overview Samples and Restrictions: Lighting equipment, low-voltage apparatus, household appliance, machine tool electric appliance, electrical machine, electric tool, electronic instrument, electrotechnical instrument,

Brand Name:JIEDONG

Model Number:JD-3052A

Place of Origin:Guangdong, China

Burning Wire Rubber Tester Combustion Test Area Volume > 0.5 Cubic Glow Wire Tester 3052A First, the product introduction: The glow wire tester is suitable for conducting fire hazard tests and combustion performance tests on electrical and electronic ...

Brand Name:YUYANG

Model Number:YYF056

Place of Origin:China

...Test Apparatus Surface Flammability Tester Description: This Radiant Panel Flame Spread Test Apparatus is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of materials, products, or assemblies under actual fire conditions. This machine

Brand Name:Hust Tony Instruments

Model Number:HTB-048

Place of Origin:China

..., or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of materials, products, or assemblies under actual fire conditions. This machine provides a

Brand Name:YUYANG

Model Number:YYF056

Place of Origin:China

..., or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of materials, products, or assemblies under actual fire conditions. This machine provides a

Brand Name:HOOHA

Place of Origin:China

...does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of materials, products, or assemblies under actual fire conditions. This machine provides a laboratory procedure for measuring and comparing surface flammability of

Brand Name:Gold

Model Number:GD-ISO9185

Place of Origin:CHINA

...Glow-Wire Test (IEC 60695-2-10/11) to assess ignition resistance under overheating, Flame Tests (50W/500W and Needle Flame) for material flammability, and Horizontal/Vertical Burning Tests (IEC 60695-11-10) to classify flame-retardant ratings (e.g., V-0,

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

...Machine For Battery Flame Resistance Test In the era of rapid technological advancement, batteries have become the power source of choice for a wide range of applications, from portable electronics to electric vehicles. However, the safety of batteries, especially in the face of potential thermal runaway and fire hazards...