iec60332 3 10 cable testing machine

Brand Name:ZL

Model Number:ZL-1004

Place of Origin:China

...Cable Testing Machine , AC and DC High Voltage Tester Equipment description: AC - DC high - voltage Tester input voltage 220V/±10% 50/60HZ,output voltage AC:0~10KV DC:0~10KV. Technologic parameter: Model: ZL-1004 Input voltage: 220V/±10% 50/60HZ Output voltage : AC:0～10KV DC:0～10KV Breakdown current : 0.5,1,3,5,10,20mA Testing...

Brand Name:HERRMAN

Model Number:3KV-35KV

Place of Origin:CHINA

... Cable Testing Machine AC Series Spark Tester We are the special manufacturer for producing AC series wire sparker. It is main technological properties correspond to JB/278.10-1993 standard. It can be used to check the insulating level of wire & cable in ...

Place of Origin:China

Brand Name:KeRang

Cold Bending Test Machine HDX1307 Parameters: Station:2 Diameter of samples:Φ2.5mm ～12.5mm The number of turns:2 to 10 turns, and the number of turns shall be as specified in the following table: Overall diameter (d) of the test piece (mm) Number of turns...

Brand Name:HOOHA

Model Number:ZY6017

Place of Origin:Guangdong

Plastic Wire Testing Equipment Horizontal Vertical Combustion Tester ZY6017 Scope of application: It is mainly used to determine the fire resistance of plastic or plastic parts by burning in the horizontal or vertical direction under the condition of 50W ...

Brand Name:DAXIAN

Model Number:DX8348B

Place of Origin:China

...Cables Combustion And Heat Release Rate Test Machine IEC60332-3-10 1, Product overview: This equipment is a test device used to evaluate the ability of vertically installed bundled wires and cables or optical cables to suppress the vertical spread of flame under specified conditions. The equipment shell is made of all SUS304 stainless steel. The whole machine is composed of: test...

Place of Origin:China

Brand Name:CHENGFENG

...Testing Machine Cable Burning Lab use Bunched Cable Flammability Test Equipment IEC60332-3 Remark : This equipment is a test device used to evaluate the ability of vertically installed bundles of wires and cables or optical cables to inhibit the vertical spread of flame under specified conditions. The equipment shell is made of all SUS304 stainless steel, and the whole machine is composed of: test...

Brand Name:AI

Model Number:SCV

Place of Origin:CHINA

IEC/ EN 60332-1 Flame Propagation Test Equipment Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a single insulated wire or cable is a bench scale test to determine the resistance of a single cable to a 1kW ...

Brand Name:SKYLINE

Model Number:SL-7603S

Place of Origin:China

...Cable Bundle Flaming Tester Ladder Type GB18380.31:2008, IEC60332-3-10:2000 Application Apply to evaluate suppression ability of spread of fire for bundles installed wires and cables ,under specified conditions. Standard According to IEC60332-3-10:2000,and GA306.1-2007. Main components Testing...

Brand Name:YUYANG

Model Number:YY610

Place of Origin:China

... equipment; It meets the standards IEC 60332-1-1:2004 in the provisions of technical indicators and requirements. Single cable combustion Tester is used to test the flame retardant property of the cable's insulating layer under abnormal conditions such as

Brand Name:Infinity Machine

Model Number:IN-8100A

Place of Origin:Made In China

...jig and put the weight at the cable, then to swing the jig right and left with the setting angle. after rotating to required cycles then stop to check the cable; or check the rotation cycles after cable broken while the cable is tested by connecting to the

Brand Name:HongCe

Model Number:FL-1

Place of Origin:China

...Cable Flexing Swivel Testing Machine With Load 6 Workstations IEC60884-1 Product Introduction: HongTong FL-1 Plug Cord Flexibility Tester is designed and manufactured according to the standard requirement of IEC 60884-1 figure 21, which can process 10,000 flexing at a rate of 60 flexing per minute. The test equipment has 6 workstations, thus six cables or cords fitted with plugs can be tested simultaneously. Test Application: The cables

Model Number:LR-A006

Place of Origin:China

Brand Name:Lonroy

...power supply cord".Applicable for bending test of power cord and DC line by related manufacturer and quality inspection department. 2.Specification Test rate 10-60 times/min adjustable Bending Angle 10 ° to 180 ° is adjustable Work station 6 plugs and

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-B617-S

...Testing Equipment Tensile Testing Machines For Cable And Wire universal test machine.pdf Main Technical Parameters of Tension Strength Tester: Items Specification Sensor Celtron load cell Capacity 5, 10, 20, 25, 50, 100, 200kg Unit Switchover G, KG, N, LB Display Device LED or PC Resolution 1/250,000 Load Accuracy ≤0.25% Max. Stroke 1400mm (excluding fixture) Test...

Brand Name:LIYI

Place of Origin:Guangdong, China

...Test Machine / Cable Plug Bending Testing Machine / Wire Bend Test Machine Product Description The test machine is in accordance with UL817 and other relevant standards "general safety requirements for software components and power supply cord".Applicable for bending test of power cord and DC line by related manufacturer and quality inspection department. Specifications Test rate 10...

Brand Name:GOLD

Model Number:GD-IEC60332-3

Place of Origin:China

...Test Machine Of Vertically Bunched Wires Or Cables IEC 60332-3-10 Introduction: The Bunched Cable Vertical Flame Tester is a specialized test device used to evaluate the ability of bundled cables or optical cables to resist vertical flame spread when installed vertically. It is a key and mandatory instrument for flame retardancy testing in the cable industry and is widely used by cable...

Brand Name:YUYANG

Model Number:YYW002

Place of Origin:China

...Cable Flex Test Equipment 6 Station 10~60 Times/Min Description: UL817 IEC60335 cable bending testing machine can test six cables or cord sfitted with plugs simultaneously. This improves testing capacity.IEC60884-1 calls for 10,000 flexing at a rate of 60 flexing per minute. Halfway through the test...

Brand Name:KingPo

Model Number:KP-PC06

Place of Origin:China

... requirement of IEC 60884-1 figure 21 which calls for 10,000 flexing at a rate of 60 flexing per minute. Six cables or cords fitted with plugs can be tested simultaneously. The cables are connected to a socket and the tail of the cable is connected to the

Brand Name:Kinte

Model Number:WH-8801A

Place of Origin:Guangdong,China (Mainland)

...folding strength. Test method is to sample fixed in the fixture, and add a certain load, test fixture swing around, after a certain number of times, view the break rate; or to not power, see the total number of swing. The machine can automatically count,

Brand Name:SWIFT

Model Number:SWT25120H-RT1200

Place of Origin:Shenzhen, China

Bundling Zip Ties Robotic Automatic Cable Tie System For Assembly Line Automatic cable tie system! Professional manufacturer! 18 year experience in automation industry! Features 1. 4 axes, X, Y, Z + Rotation. 2. X/Y/Z/R Travel: X:1200; Y:550; Z:40; R: 0 - ...

Brand Name:Beyde

Model Number:70+35

Place of Origin:China

...Machine Line for 1.5 2.5 PVC Cable Wire Insulation Line Constituents 1. Double column type position payment 2. Dancer 3. Main Repellent 4. Loader and automatic dryer 5. Crosshead 6. One layer/double moving tub 7. Main cooling basin 8. Water Mop 9. Digital diameter control 10. Mark Printer 11. Complex Holder 12. Capstan 13. Spark Test...