iec60335 2 14 test probe

Brand Name:HongCe

Model Number:HT-I02B

Place of Origin:China

IEC60335-2-14 Test Probe With Diameter 125mm Circular Stop Face, Probe Length 100mm Standard of Test Finger Probe: IEC61032 figure 2 test probe B, IEC60335-2-14 clause 20.2. Application of Test Finger Probe: This probe is intended to verify the stability and mechanical hazards of blenders. Test sample of Test Finger Probe: Blenders. Feature of Test Finger Probe: A test probe similar to that of test probe...

Brand Name:kingpo

Model Number:IEC60335-2-24-cl.20

Place of Origin:china

...-2-14|EN60335-2-14|GB4706.30 IEC60335-2-14|EN60335-2-14 Appliance: This test probe similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the

Brand Name:KingPo

Place of Origin:China

IEC60335 Electrical Safety Testing Probe Pin For Scratch Resistance Test IEC60335-1 Clause 21 Scratched Pin For Scratch Resistance Test Of The Electrical Solid Insulation Surface Product information: The test pin is used to do the scratch resistant test of the electrical solid insulation surface. It conforms to the standard requirement of IEC60335-1 clause 21. Test...

Brand Name:Sinuo

Model Number:SN1406

Place of Origin:China

..., 7mm and 8mm sieves are to meet the requirements of IEC 60335-2-14 Clause 19.102. Technical Parameters: Hole type and Hole size : Round type: Φ170µm, Φ250µm, Φ8mm, Φ7mm, Φ...

Brand Name:PEGO Electronics

Model Number:PG-TPR8

Place of Origin:China

Φ8mm Cylindrical Rod Test Probe for Blender as Per IEC60335-2-14 clause 20.102 1. Introduction The Φ8mm cylindrical rod test probe is designed to meet the test requirements of IEC60335-2-14 clause 20.102 and GB4706 clause 20.102, it is applied to check if ...

Brand Name:kerang

Model Number:HT-I33

Place of Origin:CHINA

Test Probe HT-I33 Standard:IEC60335-2-14. Application:The stirrer shall incorporate a biased-off switch that is recessed or guarded to prevent accidental operation. Test sample:Hand held blender. Feature:Appliance is checked by applying a cylindrical rod whose diameter is 40mm and which has a hemispherical end to touch the switch with a force not exceed 5N, the appliance shall not operated. Parameters: Model HT-I33 Probe diameter Φ40mm Probe

Brand Name:SHC

Model Number:SC-335F104

Place of Origin:China

...Test Probe IEC60335 Fig104 Technical parameters: Parameters /Model SC-335F104 Plane of measurement Φ5*0.5mm tin copper plate Drive pipe Inner Φ3,outer Φ5 Thermocouple Φ0.3K type Force 4±0.5 N Product information: This probe conforms to the IEC60335-2-11 figure 104 and IEC60335...

Brand Name:HJ

Model Number:HT-I02B

Place of Origin:China

...Test Equipment Test Probe With 125mm Diameter Stop Face Standard: IEC 60335-2-14 Household and similar electrical appliances – Safety – Part 2-14: Particular requirements for kitchen machines clause 20.2; IEC 61032 Protection of persons and equipment by enclosures – Probes for verification. Application: It is used to test stability and mechanical hazards for blenders, detachable parts. The test is carried out with a test probe

Place of Origin:China

Brand Name:Julixing

Model Number:LX-2B30

...IEC60335-2-14 clause 20.2. Means of a test probe that is similar to test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the test finger and the stop face being 100 mm. Test probe that is similar to test probe...

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

...Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing or the internal baffle of the housing. Can be ordered with 10~50N thrust. Can be ordered with 10~75N thrust. Test Finger Usage 1. As shown in the figure, the finger portion of the thrust test

Place of Origin:HONG KONG

Brand Name:ALLIED TESTING

Model Number:TP18

... size test fingers are to test for protection against access to hazardous parts with a human finger and / or arm. These are high precision probes made in exact accordance with IEC 61032, Figures 12 and 13. The child's finger is also called out in U.S.

Categories:Eddy Current Testing Equipment

Country/Region:china

Standard probe for eddy conductivity meter of TMD-105 Probes B type machine with diameter 14 mm working frequency of 60 KHz and diameter 8mm working frequency of 500 KHz of a probe; The probe is made of imported material, wear-resistant and high ...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-13

... short test pin, test pin 13, test rod Product Description IEC60065 IEC61032 short test pin, test pin 13, test rod Short test pin meets the standard requirements of IEC60132 IEC60065 IEC60335 IEC60950. The Test Probe is a wide range of probes to meet the ...

Brand Name:Lonroy

Place of Origin:China

...Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Introduction 1. Reference to the standards IEC61032 IEC60335 IEC60065 2. It use for testing the electric products, to test safety of it. With the 50N force to press the probe instead the finger to measure electrical safety. IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Technical specification Test...

Brand Name:Sinuo

Model Number:SN887B-150L

Place of Origin:China

...Test Chamber Complied Standards & Clauses IEC 62196-1 Ed.4CDV 2020 clause 34.3. IEC 60068-2-14 (Test Na) Equipment Overview This thermal shock test chamber conforms to IEC 60068-2-14 (Test Na) and it is required by IEC 62196-1Ed.4CDV 2020 clause 34.3. The 3-Zones Thermal Shock Test Chamber is required by IEC60335 Annex J, meets the standard requirements of IEC 60068-2-1:2007, Environmental Testing

Brand Name:Btutest

Model Number:BTU-TEST

Place of Origin:Made in China

...Testing Equipment Description: Small probe: the probe diameter is 6mm, which is suitable for measuring soft materials (paper, leather and cloth) Film, etc Tip probe: the probe diameter is 1.8mm, which is suitable for measuring hard materials (steel plate, aluminum plate and wood plate) Pipes, lenses, etc Large probe Probe diameter: 14...

Brand Name:HUATEC

Model Number:HEC-103B

Place of Origin:Beijing

...testing equipment eddy current testing machine Including two probes of diameter 14 mm working frequency of 60 KHz and diameter 8mm working frequency of 500 KHz of a probe; Probe can be Self replacement. Model HEC-103B has unique camber modification technology, with the special camber measurement mode and “∧” shape probe...

Brand Name:Jetacon

Model Number:DCC-1

Place of Origin:China Mainland

Alligator Clips, Pincer, Probe Tip, Spade Lug, Test Leads Assortments Application: Electric or Electrical Testing Work Copper Test Leads Length: 100cm ( 150cm 200cm 300cm 400cm 500cm are also available ) Withstand voltage:>2KV Temperature range: -25°C - +...

Brand Name:HUST Tony

Model Number:Probe V

Place of Origin:Guangdong,China(Mainland)

... over thirteen years, we continue to provide stable performance, high-quality equipment for product quality testing industry.At present, the company has 14 utility model patent technologies,2 patents for invention and participated in the drafting and